@@ -84,54 +84,59 @@ rfkill-bt {
shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
};
- vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
+ typec_vin: regulator-typec-vin {
compatible = "regulator-fixed";
- enable-active-high;
- gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_0_vcc3v3_en>;
- regulator-name = "vcc3v3_pcie2x1l0";
+ regulator-name = "typec_vin";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <50000>;
- vin-supply = <&vcc5v0_sys>;
};
- vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
+ vcc3v3_wf: regulator-vcc3v3-wf {
compatible = "regulator-fixed";
- regulator-name = "vcc3v3_pcie2x1l2";
+ enable-active-high;
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ekey_en>;
+ regulator-name = "vcc3v3_wf";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- startup-delay-us = <5000>;
- vin-supply = <&vcc_3v3_s3>;
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
};
- vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
+ /* pi6c pcie clock generator */
+ vcc3v3_pi6c_05: vcc3v3_pcie30: regulator-vcc3v3-pi6c-05 {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&pcie3_vcc3v3_en>;
- regulator-name = "vcc3v3_pcie30";
+ pinctrl-0 = <&pcie30x4_pwren_h>;
+ regulator-name = "vcc3v3_pi6c_05";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <5000>;
vin-supply = <&vcc5v0_sys>;
};
- vcc5v0_host: regulator-vcc5v0-host {
+ vcc4v0_sys: regulator-vcc4v0-sys {
compatible = "regulator-fixed";
- regulator-name = "vcc5v0_host";
- regulator-boot-on;
+ regulator-name = "vcc4v0_sys";
regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v_usb: regulator-vcc5v-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v_usb";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
+ pinctrl-0 = <&usb_host_pwren_h>;
vin-supply = <&vcc5v0_sys>;
};
@@ -142,6 +147,7 @@ vcc5v0_sys: regulator-vcc5v0-sys {
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ vin-supply = <&typec_vin>;
};
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
@@ -151,7 +157,7 @@ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc4v0_sys>;
};
};
@@ -239,7 +245,7 @@ vdd_cpu_big0_s0: regulator@42 {
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -256,7 +262,7 @@ vdd_cpu_big1_s0: regulator@43 {
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -350,27 +356,28 @@ map1 {
&pcie2x1l0 {
pinctrl-names = "default";
- pinctrl-0 = <&pcie2_0_rst>;
+ pinctrl-0 = <&pcie30x1_0_perstn_m1_l>;
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+ vpcie3v3-supply = <&vcc3v3_wf>;
status = "okay";
};
&pcie2x1l2 {
pinctrl-names = "default";
- pinctrl-0 = <&pcie2_2_rst>;
+ pinctrl-0 = <&pcie_perst_l>;
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+ vpcie3v3-supply = <&vcc_3v3_s3>;
status = "okay";
};
&pcie30phy {
+ phy-supply = <&vcc3v3_pi6c_05>;
status = "okay";
};
&pcie3x4 {
pinctrl-names = "default";
- pinctrl-0 = <&pcie3_rst>;
+ pinctrl-0 = <&pcie30x4_perstn_m1_l>;
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie30>;
status = "okay";
@@ -396,31 +403,31 @@ hp_detect: hp-detect {
};
pcie2 {
- pcie2_0_rst: pcie2-0-rst {
+ pcie30x1_0_perstn_m1_l: pcie30x1-0-perstn-m1-l {
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
- pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+ ekey_en: ekey-en {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
- pcie2_2_rst: pcie2-2-rst {
+ pcie_perst_l: pcie-perst-l {
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie3 {
- pcie3_rst: pcie3-rst {
+ pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- pcie3_vcc3v3_en: pcie3-vcc3v3-en {
+ pcie30x4_pwren_h: pcie30x4-pwren-h {
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
- vcc5v0_host_en: vcc5v0-host-en {
+ usb_host_pwren_h: usb-host-pwren-h {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -474,7 +481,7 @@ &sdio {
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
- vmmc-supply = <&vcc3v3_pcie2x1l0>;
+ vmmc-supply = <&vcc3v3_wf>;
vqmmc-supply = <&vcc_1v8_s3>;
pinctrl-names = "default";
pinctrl-0 = <&sdiom0_pins>;
@@ -523,21 +530,21 @@ pmic@0 {
system-power-controller;
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc5v0_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
+ vcc1-supply = <&vcc4v0_sys>;
+ vcc2-supply = <&vcc4v0_sys>;
+ vcc3-supply = <&vcc4v0_sys>;
+ vcc4-supply = <&vcc4v0_sys>;
+ vcc5-supply = <&vcc4v0_sys>;
+ vcc6-supply = <&vcc4v0_sys>;
+ vcc7-supply = <&vcc4v0_sys>;
+ vcc8-supply = <&vcc4v0_sys>;
+ vcc9-supply = <&vcc4v0_sys>;
+ vcc10-supply = <&vcc4v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
- vcc12-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc4v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
- vcca-supply = <&vcc5v0_sys>;
+ vcca-supply = <&vcc4v0_sys>;
gpio-controller;
#gpio-cells = <2>;
@@ -840,6 +847,7 @@ &u2phy1 {
};
&u2phy1_otg {
+ phy-supply = <&vcc5v_usb>;
status = "okay";
};
@@ -858,7 +866,7 @@ &u2phy3 {
};
&u2phy3_host {
- phy-supply = <&vcc5v0_host>;
+ phy-supply = <&vcc5v_usb>;
status = "okay";
};
fix regulator and pin names to match with schematic. regulator for USB ports are unnamed, so I referred schematic for Radxa ROCK 5B+. add missing "typec_vin" and "vcc4v0_sys" regulator, and add missing "phy-supply" for "pcie30phy" and "u2phy1_otg". remove now unused and non-existent "vcc3v3_pcie2x1l2" regulator. remove "regulator-always-on" and "regulator-boot-on" from regulators which is turned on by consumer. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> --- .../boot/dts/rockchip/rk3588-rock-5b.dts | 106 ++++++++++-------- 1 file changed, 57 insertions(+), 49 deletions(-)