@@ -1587,6 +1587,42 @@ uart11: serial@2afd0000 {
status = "disabled";
};
+ combphy0_ps: phy@2b050000 {
+ compatible = "rockchip,rk3576-naneng-combphy";
+ reg = <0x0 0x2b050000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&cru CLK_REF_PCIE0_PHY>,
+ <&cru PCLK_PCIE2_COMBOPHY0>,
+ <&cru PCLK_PCIE0>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&cru CLK_REF_PCIE0_PHY>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_PCIE0_PIPE_PHY>,
+ <&cru SRST_P_PCIE2_COMBOPHY0>;
+ reset-names = "phy", "apb";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
+ status = "disabled";
+ };
+
+ combphy1_psu: phy@2b060000 {
+ compatible = "rockchip,rk3576-naneng-combphy";
+ reg = <0x0 0x2b060000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&cru CLK_REF_PCIE1_PHY>,
+ <&cru PCLK_PCIE2_COMBOPHY1>,
+ <&cru PCLK_PCIE1>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&cru CLK_REF_PCIE1_PHY>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_PCIE1_PIPE_PHY>,
+ <&cru SRST_P_PCIE2_COMBOPHY1>;
+ reset-names = "phy", "apb";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
+ status = "disabled";
+ };
+
sram: sram@3ff88000 {
compatible = "mmio-sram";
reg = <0x0 0x3ff88000 0x0 0x78000>;
rk3576 has two naneng combo phy, - combophy0 is used for one of pcie and sata; - combophy1 is used for one of pcie, sata and usb3; Signed-off-by: Kever Yang <kever.yang@rock-chips.com> --- Changes in v2: - update the clock and reset names to pass the DTB CHECK arch/arm64/boot/dts/rockchip/rk3576.dtsi | 36 ++++++++++++++++++++++++ 1 file changed, 36 insertions(+)