@@ -450,6 +450,11 @@ soc {
#size-cells = <2>;
ranges;
+ hdptxphy_grf: syscon@26032000 {
+ compatible = "rockchip,rk3576-hdptxphy-grf", "syscon";
+ reg = <0x0 0x26032000 0x0 0x100>;
+ };
+
sys_grf: syscon@2600a000 {
compatible = "rockchip,rk3576-sys-grf", "syscon";
reg = <0x0 0x2600a000 0x0 0x2000>;
@@ -894,6 +899,46 @@ vop_mmu: iommu@27d07e00 {
status = "disabled";
};
+ hdmi: hdmi@27da0000 {
+ compatible = "rockchip,rk3576-dw-hdmi-qp";
+ reg = <0x0 0x27da0000 0x0 0x20000>;
+ clocks = <&cru PCLK_HDMITX0>,
+ <&cru CLK_HDMITX0_EARC>,
+ <&cru CLK_HDMITX0_REF>,
+ <&cru MCLK_SAI6_8CH>,
+ <&cru CLK_HDMITXHDP>,
+ <&cru HCLK_VO0_ROOT>;
+ clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
+ interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "avp", "cec", "earc", "main", "hpd";
+ phys = <&hdptxphy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda>;
+ power-domains = <&power RK3576_PD_VO0>;
+ resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMITXHDP>;
+ reset-names = "ref", "hdp";
+ rockchip,grf = <&ioc_grf>;
+ rockchip,vo-grf = <&vo0_grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
qos_hdcp1: qos@27f02000 {
compatible = "rockchip,rk3576-qos", "syscon";
reg = <0x0 0x27f02000 0x0 0x20>;
@@ -1655,6 +1700,19 @@ uart11: serial@2afd0000 {
status = "disabled";
};
+ hdptxphy: hdmiphy@2b000000 {
+ compatible = "rockchip,rk3576-hdptx-phy", "rockchip,rk3588-hdptx-phy";
+ reg = <0x0 0x2b000000 0x0 0x2000>;
+ clocks = <&cru CLK_PHY_REF_SRC>, <&cru PCLK_HDPTX_APB>;
+ clock-names = "ref", "apb";
+ resets = <&cru SRST_P_HDPTX_APB>, <&cru SRST_HDPTX_INIT>,
+ <&cru SRST_HDPTX_CMN>, <&cru SRST_HDPTX_LANE>;
+ reset-names = "apb", "init", "cmn", "lane";
+ rockchip,grf = <&hdptxphy_grf>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
sram: sram@3ff88000 {
compatible = "mmio-sram";
reg = <0x0 0x3ff88000 0x0 0x78000>;