diff mbox series

[v7,03/12] media: rkvdec: h264: Use bytesperline and buffer height as virstride

Message ID 20250225-rkvdec_h264_high10_and_422_support-v7-3-7992a68a4910@collabora.com (mailing list archive)
State New
Headers show
Series media: rkvdec: Add H.264 High 10 and 4:2:2 profile support | expand

Commit Message

Sebastian Fricke Feb. 25, 2025, 9:40 a.m. UTC 
From: Jonas Karlman <jonas@kwiboo.se>

Use bytesperline and buffer height to calculate the strides configured.

This does not really change anything other than ensuring the
bytesperline that is signaled to userspace matches what is configured
in HW.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
---
 drivers/staging/media/rkvdec/rkvdec-h264.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 4fc167b42cf0c74fcc7adad5b867d9d7cd8af29b..7a1e76d423df55bd01c1ff26ff2c6d1b81ee7169 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -896,9 +896,9 @@  static void config_registers(struct rkvdec_ctx *ctx,
 	dma_addr_t rlc_addr;
 	dma_addr_t refer_addr;
 	u32 rlc_len;
-	u32 hor_virstride = 0;
-	u32 ver_virstride = 0;
-	u32 y_virstride = 0;
+	u32 hor_virstride;
+	u32 ver_virstride;
+	u32 y_virstride;
 	u32 yuv_virstride = 0;
 	u32 offset;
 	dma_addr_t dst_addr;
@@ -909,16 +909,16 @@  static void config_registers(struct rkvdec_ctx *ctx,
 
 	f = &ctx->decoded_fmt;
 	dst_fmt = &f->fmt.pix_mp;
-	hor_virstride = (sps->bit_depth_luma_minus8 + 8) * dst_fmt->width / 8;
-	ver_virstride = round_up(dst_fmt->height, 16);
+	hor_virstride = dst_fmt->plane_fmt[0].bytesperline;
+	ver_virstride = dst_fmt->height;
 	y_virstride = hor_virstride * ver_virstride;
 
 	if (sps->chroma_format_idc == 0)
 		yuv_virstride = y_virstride;
 	else if (sps->chroma_format_idc == 1)
-		yuv_virstride += y_virstride + y_virstride / 2;
+		yuv_virstride = y_virstride + y_virstride / 2;
 	else if (sps->chroma_format_idc == 2)
-		yuv_virstride += 2 * y_virstride;
+		yuv_virstride = 2 * y_virstride;
 
 	reg = RKVDEC_Y_HOR_VIRSTRIDE(hor_virstride / 16) |
 	      RKVDEC_UV_HOR_VIRSTRIDE(hor_virstride / 16) |