[2/5] arm64: dts: rockchip: move rock 5b to include file

Commit Message

Sebastian Reichel March 24, 2025, 5:04 p.m. UTC

Radxa released some more boards, which are based on the original
Rock 5B. Move its board description into an include file to avoid
unnecessary duplication.

NOTE: this should be merged with the previous commit to ensure
bisectability. The rename happens in a separete commit during
development because git does not properly detect the rename when
the original filename is reused in the same commit. This means

1. it's a lot harder to review the changes
2. it's a lot harder to rebase the patch series

Signed-off-by: Sebastian Reichel <[e-mail]>
---
 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts  | 52 ++++++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi | 34 ----------------
 2 files changed, 52 insertions(+), 34 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
new file mode 100644
index 0000000000000000000000000000000000000000..9407a7c9910ada1f6c803d2e15785a9cbd9bd655
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -0,0 +1,52 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588-rock-5b.dtsi"
+
+/ {
+	model = "Radxa ROCK 5B";
+	compatible = "radxa,rock-5b", "rockchip,rk3588";
+};
+
+&sdio {
+	max-frequency = <200000000>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	bus-width = <4>;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	wakeup-source;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_pcie2x1l0>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom0_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
index d22068475c5dc6cb885f878f3f527a66edf1ba70..dccb8492f9f0632abd96c3dafc723e01491abad5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
@@ -8,9 +8,6 @@ 
 #include "rk3588.dtsi"
 
 / {
-	model = "Radxa ROCK 5B";
-	compatible = "radxa,rock-5b", "rockchip,rk3588";
-
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
@@ -139,10 +136,6 @@  vcc5v0_host: regulator-vcc5v0-host {
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 
@@ -530,27 +523,6 @@  &sdmmc {
 	status = "okay";
 };
 
-&sdio {
-	max-frequency = <200000000>;
-	no-sd;
-	no-mmc;
-	non-removable;
-	bus-width = <4>;
-	cap-sdio-irq;
-	disable-wp;
-	keep-power-in-suspend;
-	wakeup-source;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc3v3_pcie2x1l0>;
-	vqmmc-supply = <&vcc_1v8_s3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdiom0_pins>;
-	status = "okay";
-};
-
 &sfc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&fspim2_pins>;
@@ -565,12 +537,6 @@  flash@0 {
 	};
 };
 
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
-	status = "okay";
-};
-
 &spi2 {
 	status = "okay";
 	assigned-clocks = <&cru CLK_SPI2>;