diff mbox

ARM: dts: rockchip: add gpio-ir-receiver to the R89 board

Message ID 2515484.rcZl3ThkRZ@diego (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Stübner Nov. 27, 2015, 10:53 p.m. UTC 
Add support for the IR receiver present on the R89 board.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk3288-r89.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Heiko Stübner Dec. 4, 2015, 7:30 p.m. UTC | #1 
Am Freitag, 27. November 2015, 23:53:35 schrieb Heiko Stübner:
> Add support for the IR receiver present on the R89 board.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

applied to my dts32 branch for 4.5
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 14b9fc7..17f13c7 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -78,6 +78,13 @@ 
 		};
 	};
 
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
 	vcc_host: vcc-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -310,6 +317,12 @@ 
 		};
 	};
 
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;