diff mbox series

[v2,2/2] drm/rockchip: rk3066_hdmi: drop custom fill_modes hook

Message ID 410b116b-cb63-7ba7-3689-4f0832ab5796@gmail.com (mailing list archive)
State New
Headers show
Series Rockchip rk3066_hdmi update | expand

Commit Message

Johan Jonker Dec. 18, 2023, 3:49 p.m. UTC 
CRTC size validation for the display controller has been added with
Commit 8e140cb60270 ("drm/rockchip: vop: limit maximum resolution to
hardware capabilities"), so we can drop the custom fill_modes hook.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 drivers/gpu/drm/rockchip/rk3066_hdmi.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

--
2.39.2

Comments

Maxime Ripard Dec. 19, 2023, 12:55 p.m. UTC | #1 
Hi,

On Mon, Dec 18, 2023 at 04:49:06PM +0100, Johan Jonker wrote:
> CRTC size validation for the display controller has been added with
> Commit 8e140cb60270 ("drm/rockchip: vop: limit maximum resolution to
> hardware capabilities"), so we can drop the custom fill_modes hook.
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>

I'm not sure those two are equivalent. CRTC and connectors usually have
different requirements and capabilities, and thus different,
supplementary, mode_valid/atomic_check implementations.

Maxime
Johan Jonker Dec. 19, 2023, 3:40 p.m. UTC | #2 
On 12/19/23 13:55, Maxime Ripard wrote:
> Hi,
> 
> On Mon, Dec 18, 2023 at 04:49:06PM +0100, Johan Jonker wrote:
>> CRTC size validation for the display controller has been added with
>> Commit 8e140cb60270 ("drm/rockchip: vop: limit maximum resolution to
>> hardware capabilities"), so we can drop the custom fill_modes hook.
>>
>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> 

> I'm not sure those two are equivalent. CRTC and connectors usually have
> different requirements and capabilities, and thus different,
> supplementary, mode_valid/atomic_check implementations.

Rockchip RK3066 CRTC and connector resolution max_output are equivalent.

From Rockchip PX2 TRM V1.0.pdf page 17:
- Video Encoder
  Maximum frame rate is up to 30fps@1920x1080

- Display Interface
  Support LCD or TFT interfaces up to 1920x1080

- HDMI TX Interface
   HDMI version 1.4a, HDCP revision 1.4 and DVI version 1.0 compliant transmitter
   Supports DTV from 480i to 1080i/p HD resolution, and PC from VGA to UXGA by LCDC0 or LCDC1 in RK PX2


Compared to the drm_helper_probe_single_connector_modes() this function added an extra max_output

Checked in rockchip_drm_vop.c is:
https://lore.kernel.org/linux-rockchip/20230216102447.582905-2-s.hauer@pengutronix.de/

+	if (vop->data->max_output.width && mode->hdisplay > vop->data->max_output.width)
+		return MODE_BAD_HVALUE;
+
+	if (vop->data->max_output.height && mode->vdisplay > vop->data->max_output.height)
+		return MODE_BAD_VVALUE;

For RK3066 VOP max_output:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/rockchip/rockchip_vop_reg.c#n506

This patch was made with HDMI in mind.

	.max_output = { 1920, 1080 },

This first part was added by Heiko, but not was not part my patch that I submitted:
-	if (maxX > 1920)
-		maxX = 1920;
-	if (maxY > 1080)
-		maxY = 1080;
-
-	return drm_helper_probe_single_connector_modes(connector, maxX, maxY);
-}

Original patch:
https://patchwork.freedesktop.org/patch/msgid/20190330095639.14626-2-jbx6244@gmail.com

+static int
+rk3066_hdmi_probe_single_connector_modes(struct drm_connector *connector,
+					 uint32_t maxX, uint32_t maxY)
+{
+	return drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+}

Rockchip RK3066 CRTC and connector resolution max_output are equivalent.

Johan

> 
> Maxime
Maxime Ripard Dec. 21, 2023, 9:07 a.m. UTC | #3 
On Tue, Dec 19, 2023 at 04:40:12PM +0100, Johan Jonker wrote:
> 
> 
> On 12/19/23 13:55, Maxime Ripard wrote:
> > Hi,
> > 
> > On Mon, Dec 18, 2023 at 04:49:06PM +0100, Johan Jonker wrote:
> >> CRTC size validation for the display controller has been added with
> >> Commit 8e140cb60270 ("drm/rockchip: vop: limit maximum resolution to
> >> hardware capabilities"), so we can drop the custom fill_modes hook.
> >>
> >> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> > 
> 
> > I'm not sure those two are equivalent. CRTC and connectors usually have
> > different requirements and capabilities, and thus different,
> > supplementary, mode_valid/atomic_check implementations.
> 
> Rockchip RK3066 CRTC and connector resolution max_output are equivalent.
> 
> From Rockchip PX2 TRM V1.0.pdf page 17:
> - Video Encoder
>   Maximum frame rate is up to 30fps@1920x1080
> 
> - Display Interface
>   Support LCD or TFT interfaces up to 1920x1080
> 
> - HDMI TX Interface
>    HDMI version 1.4a, HDCP revision 1.4 and DVI version 1.0 compliant transmitter
>    Supports DTV from 480i to 1080i/p HD resolution, and PC from VGA to UXGA by LCDC0 or LCDC1 in RK PX2

My point is that there's two limits: the CRTC and HDMI controller ones.
You should put the CRTC ones in the CRTC driver, and the HDMI controller
ones in the HDMI controller driver.

If they are equivalent, great, it's going to filter out the same things, but...

> Compared to the drm_helper_probe_single_connector_modes() this function added an extra max_output
> 
> Checked in rockchip_drm_vop.c is:
> https://lore.kernel.org/linux-rockchip/20230216102447.582905-2-s.hauer@pengutronix.de/
> 
> +	if (vop->data->max_output.width && mode->hdisplay > vop->data->max_output.width)
> +		return MODE_BAD_HVALUE;
> +
> +	if (vop->data->max_output.height && mode->vdisplay > vop->data->max_output.height)
> +		return MODE_BAD_VVALUE;
> 
> For RK3066 VOP max_output:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/rockchip/rockchip_vop_reg.c#n506
> 
> This patch was made with HDMI in mind.
> 
> 	.max_output = { 1920, 1080 },
> 
> This first part was added by Heiko, but not was not part my patch that I submitted:
> -	if (maxX > 1920)
> -		maxX = 1920;
> -	if (maxY > 1080)
> -		maxY = 1080;
> -
> -	return drm_helper_probe_single_connector_modes(connector, maxX, maxY);
> -}
> 
> Original patch:
> https://patchwork.freedesktop.org/patch/msgid/20190330095639.14626-2-jbx6244@gmail.com
> 
> +static int
> +rk3066_hdmi_probe_single_connector_modes(struct drm_connector *connector,
> +					 uint32_t maxX, uint32_t maxY)
> +{
> +	return drm_helper_probe_single_connector_modes(connector, 1920, 1080);
> +}
> 
> Rockchip RK3066 CRTC and connector resolution max_output are equivalent.

... a user / dev unfamiliar with the SoC won't have to go through that
to figure out how it's handled, it will be obvious.

Maxime
diff mbox series

Patch

diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 0dac6d133767..6dadd753985c 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -501,18 +501,6 @@  rk3066_hdmi_connector_best_encoder(struct drm_connector *connector)
 	return &hdmi->encoder.encoder;
 }

-static int
-rk3066_hdmi_probe_single_connector_modes(struct drm_connector *connector,
-					 uint32_t maxX, uint32_t maxY)
-{
-	if (maxX > 1920)
-		maxX = 1920;
-	if (maxY > 1080)
-		maxY = 1080;
-
-	return drm_helper_probe_single_connector_modes(connector, maxX, maxY);
-}
-
 static void rk3066_hdmi_connector_destroy(struct drm_connector *connector)
 {
 	drm_connector_unregister(connector);
@@ -520,7 +508,7 @@  static void rk3066_hdmi_connector_destroy(struct drm_connector *connector)
 }

 static const struct drm_connector_funcs rk3066_hdmi_connector_funcs = {
-	.fill_modes = rk3066_hdmi_probe_single_connector_modes,
+	.fill_modes = drm_helper_probe_single_connector_modes,
 	.detect = rk3066_hdmi_connector_detect,
 	.destroy = rk3066_hdmi_connector_destroy,
 	.reset = drm_atomic_helper_connector_reset,