diff mbox series

arm64: dts: rockchip: Update nanopi4 phy reset properties

Message ID 4d16c24ae3651a2119cf5bb1213f46a9fce4b39a.1570444773.git.robin.murphy@arm.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: rockchip: Update nanopi4 phy reset properties | expand

Commit Message

Robin Murphy Oct. 7, 2019, 11:33 a.m. UTC
Use the now-preferred generic phy reset properties instead of the
dwmac-specific ones.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Heiko Stuebner Oct. 10, 2019, 9:29 p.m. UTC | #1
Am Montag, 7. Oktober 2019, 13:33:26 CEST schrieb Robin Murphy:
> Use the now-preferred generic phy reset properties instead of the
> dwmac-specific ones.
> 
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>

applied for 5.5

Thanks
Heiko
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index dd16c80d923e..170f7ed6d773 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -152,9 +152,6 @@ 
 	phy-handle = <&rtl8211e>;
 	phy-mode = "rgmii";
 	phy-supply = <&vcc3v3_s3>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 30000>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 	tx_delay = <0x28>;
 	rx_delay = <0x11>;
 	status = "okay";
@@ -168,6 +165,9 @@ 
 			reg = <1>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 		};
 	};
 };