@@ -737,9 +737,9 @@ static int hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
return 0;
}
-static void dw_hdmi_phy_enable_power(struct dw_hdmi *hdmi, u8 enable)
+static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable)
{
- hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
+ hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_PDZ_OFFSET,
HDMI_PHY_CONF0_PDZ_MASK);
}
@@ -879,7 +879,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
/* REMOVE CLK TERM */
hdmi_phy_i2c_write(hdmi, 0x8000, 0x05); /* CKCALCTRL */
- dw_hdmi_phy_enable_power(hdmi, 1);
+ dw_hdmi_phy_enable_powerdown(hdmi, false);
/* toggle TMDS enable */
dw_hdmi_phy_enable_tmds(hdmi, 0);
@@ -924,7 +924,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)
dw_hdmi_phy_sel_data_en_pol(hdmi, 1);
dw_hdmi_phy_sel_interface_control(hdmi, 0);
dw_hdmi_phy_enable_tmds(hdmi, 0);
- dw_hdmi_phy_enable_power(hdmi, 0);
+ dw_hdmi_phy_enable_powerdown(hdmi, true);
/* Enable CSC */
ret = hdmi_phy_configure(hdmi, 0, 8, cscon);
@@ -1155,7 +1155,7 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi)
return;
dw_hdmi_phy_enable_tmds(hdmi, 0);
- dw_hdmi_phy_enable_power(hdmi, 0);
+ dw_hdmi_phy_enable_powerdown(hdmi, true);
hdmi->phy_enabled = false;
}
dw_hdmi_phy_enable_power() is not about enabling and disabling power. It is about allowing or preventing power-down mode being entered - the register is documented as "Power-down enable (active low 0b)." This can be seen as the bit has no effect when the HDMI phy is operational on iMX6 hardware. Rename the function to dw_hdmi_phy_enable_powerdown() to reflect the documentation, make it take a bool for the 'enable' argument, and invert the value to be written. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- drivers/gpu/drm/bridge/dw_hdmi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)