mbox series

[v7,00/29] Rework the trip points creation

Message ID 20220928210059.891387-1-daniel.lezcano@linaro.org (mailing list archive)
Headers show
Series Rework the trip points creation | expand

Message

Daniel Lezcano Sept. 28, 2022, 9 p.m. UTC
This work is the pre-requisite of handling correctly when the trip
point are crossed. For that we need to rework how the trip points are
declared and assigned to a thermal zone.

Even if it appears to be a common sense to have the trip points being
ordered, this no guarantee neither documentation telling that is the
case.

One solution could have been to create an ordered array of trips built
when registering the thermal zone by calling the different get_trip*
ops. However those ops receive a thermal zone pointer which is not
known as it is in the process of creating it.

This cyclic dependency shows we have to rework how we manage the trip
points.

Actually, all the trip points definition can be common to the backend
sensor drivers and we can factor out the thermal trip structure in all
of them.

Then, as we register the thermal trips array, they will be available
in the thermal zone structure and a core function can return the trip
given its id.

The get_trip_* ops won't be needed anymore and could be removed. The
resulting code will be another step forward to a self encapsulated
generic thermal framework.

Most of the drivers can be converted more or less easily. This series
does a first round with most of the drivers. Some remain and will be
converted but with a smaller set of changes as the conversion is a bit
more complex.

Changelog:
 v7:
    - Added missing return 0 in the x86_pkg_temp driver
 v6:
    - Improved the code for the get_crit_temp() function as suggested by Rafael
    - Removed inner parenthesis in the set_trip_temp() function and invert the
      conditions. Check the type of the trip point is unchanged
    - Folded patch 4 with 1
    - Add per thermal zone info message in the bang-bang governor
    - Folded the fix for an uninitialized variable in int340x_thermal_zone_add()
 v5:
    - Fixed a deadlock when calling thermal_zone_get_trip() while
      handling the thermal zone lock
    - Remove an extra line in the sysfs change
    - Collected tags
v4:
   - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski
   - Collected tags
 v3:
   - Reorg the series to be git-bisect safe
   - Added the set_trip generic function
   - Added the get_crit_temp generic function
   - Removed more dead code in the thermal-of
   - Fixed the exynos changelog
   - Fixed the error check for the exynos drivers
   - Collected tags
 v2:
   - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip()
   - Removed tab whitespace in the acerhdf driver
   - Collected tags

Cc: Raju Rangoju <rajur@chelsio.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Kaestle <peter@piie.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amitk@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Support Opensource <support.opensource@diasemi.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-omap@vger.kernel.org

Daniel Lezcano (29):
  thermal/core: Add a generic thermal_zone_get_trip() function
  thermal/sysfs: Always expose hysteresis attributes
  thermal/core: Add a generic thermal_zone_set_trip() function
  thermal/core/governors: Use thermal_zone_get_trip() instead of ops
    functions
  thermal/of: Use generic thermal_zone_get_trip() function
  thermal/of: Remove unused functions
  thermal/drivers/exynos: Use generic thermal_zone_get_trip() function
  thermal/drivers/exynos: of_thermal_get_ntrips()
  thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by
    thermal_zone_get_trip()
  thermal/drivers/tegra: Use generic thermal_zone_get_trip() function
  thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function
  thermal/drivers/hisi: Use generic thermal_zone_get_trip() function
  thermal/drivers/qcom: Use generic thermal_zone_get_trip() function
  thermal/drivers/armada: Use generic thermal_zone_get_trip() function
  thermal/drivers/rcar_gen3: Use the generic function to get the number
    of trips
  thermal/of: Remove of_thermal_get_ntrips()
  thermal/of: Remove of_thermal_is_trip_valid()
  thermal/of: Remove of_thermal_set_trip_hyst()
  thermal/of: Remove of_thermal_get_crit_temp()
  thermal/drivers/st: Use generic trip points
  thermal/drivers/imx: Use generic thermal_zone_get_trip() function
  thermal/drivers/rcar: Use generic thermal_zone_get_trip() function
  thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function
  thermal/drivers/da9062: Use generic thermal_zone_get_trip() function
  thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() /
    ti_thermal_trip_is_valid()
  thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function
  thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function
  thermal/intel/int340x: Replace parameter to simplify
  thermal/drivers/intel: Use generic thermal_zone_get_trip() function

 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h    |   2 -
 .../ethernet/chelsio/cxgb4/cxgb4_thermal.c    |  41 +----
 drivers/platform/x86/acerhdf.c                |  73 +++-----
 drivers/thermal/armada_thermal.c              |  39 ++---
 drivers/thermal/broadcom/bcm2835_thermal.c    |   8 +-
 drivers/thermal/da9062-thermal.c              |  52 +-----
 drivers/thermal/gov_bang_bang.c               |  39 +++--
 drivers/thermal/gov_fair_share.c              |  18 +-
 drivers/thermal/gov_power_allocator.c         |  51 +++---
 drivers/thermal/gov_step_wise.c               |  22 ++-
 drivers/thermal/hisi_thermal.c                |  11 +-
 drivers/thermal/imx_thermal.c                 |  72 +++-----
 .../int340x_thermal/int340x_thermal_zone.c    |  33 ++--
 .../int340x_thermal/int340x_thermal_zone.h    |   4 +-
 .../processor_thermal_device.c                |  10 +-
 drivers/thermal/intel/x86_pkg_temp_thermal.c  | 120 +++++++------
 drivers/thermal/qcom/qcom-spmi-temp-alarm.c   |  39 ++---
 drivers/thermal/rcar_gen3_thermal.c           |   2 +-
 drivers/thermal/rcar_thermal.c                |  53 +-----
 drivers/thermal/samsung/exynos_tmu.c          |  57 +++----
 drivers/thermal/st/st_thermal.c               |  47 +----
 drivers/thermal/tegra/soctherm.c              |  33 ++--
 drivers/thermal/tegra/tegra30-tsensor.c       |  17 +-
 drivers/thermal/thermal_core.c                | 161 +++++++++++++++---
 drivers/thermal/thermal_core.h                |  24 +--
 drivers/thermal/thermal_helpers.c             |  28 +--
 drivers/thermal/thermal_netlink.c             |  21 +--
 drivers/thermal/thermal_of.c                  | 116 -------------
 drivers/thermal/thermal_sysfs.c               | 133 +++++----------
 drivers/thermal/ti-soc-thermal/ti-thermal.h   |  15 --
 drivers/thermal/uniphier_thermal.c            |  27 ++-
 include/linux/thermal.h                       |  10 ++
 32 files changed, 560 insertions(+), 818 deletions(-)

Comments

Daniel Lezcano Sept. 29, 2022, 12:25 p.m. UTC | #1
Hi Rafael,

are you happy with the changes? I would like to integrate those changes 
with the thermal pull request


On 28/09/2022 23:00, Daniel Lezcano wrote:
> This work is the pre-requisite of handling correctly when the trip
> point are crossed. For that we need to rework how the trip points are
> declared and assigned to a thermal zone.
> 
> Even if it appears to be a common sense to have the trip points being
> ordered, this no guarantee neither documentation telling that is the
> case.
> 
> One solution could have been to create an ordered array of trips built
> when registering the thermal zone by calling the different get_trip*
> ops. However those ops receive a thermal zone pointer which is not
> known as it is in the process of creating it.
> 
> This cyclic dependency shows we have to rework how we manage the trip
> points.
> 
> Actually, all the trip points definition can be common to the backend
> sensor drivers and we can factor out the thermal trip structure in all
> of them.
> 
> Then, as we register the thermal trips array, they will be available
> in the thermal zone structure and a core function can return the trip
> given its id.
> 
> The get_trip_* ops won't be needed anymore and could be removed. The
> resulting code will be another step forward to a self encapsulated
> generic thermal framework.
> 
> Most of the drivers can be converted more or less easily. This series
> does a first round with most of the drivers. Some remain and will be
> converted but with a smaller set of changes as the conversion is a bit
> more complex.
> 
> Changelog:
>   v7:
>      - Added missing return 0 in the x86_pkg_temp driver
>   v6:
>      - Improved the code for the get_crit_temp() function as suggested by Rafael
>      - Removed inner parenthesis in the set_trip_temp() function and invert the
>        conditions. Check the type of the trip point is unchanged
>      - Folded patch 4 with 1
>      - Add per thermal zone info message in the bang-bang governor
>      - Folded the fix for an uninitialized variable in int340x_thermal_zone_add()
>   v5:
>      - Fixed a deadlock when calling thermal_zone_get_trip() while
>        handling the thermal zone lock
>      - Remove an extra line in the sysfs change
>      - Collected tags
> v4:
>     - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski
>     - Collected tags
>   v3:
>     - Reorg the series to be git-bisect safe
>     - Added the set_trip generic function
>     - Added the get_crit_temp generic function
>     - Removed more dead code in the thermal-of
>     - Fixed the exynos changelog
>     - Fixed the error check for the exynos drivers
>     - Collected tags
>   v2:
>     - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip()
>     - Removed tab whitespace in the acerhdf driver
>     - Collected tags
> 
> Cc: Raju Rangoju <rajur@chelsio.com>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Peter Kaestle <peter@piie.net>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Mark Gross <markgross@kernel.org>
> Cc: Miquel Raynal <miquel.raynal@bootlin.com>
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amitk@kernel.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
> Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Ray Jui <rjui@broadcom.com>
> Cc: Scott Branden <sbranden@broadcom.com>
> Cc: Support Opensource <support.opensource@diasemi.com>
> Cc: Lukasz Luba <lukasz.luba@arm.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Thara Gopinath <thara.gopinath@linaro.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Cc: Alim Akhtar <alim.akhtar@samsung.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Jonathan Hunter <jonathanh@nvidia.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Antoine Tenart <atenart@kernel.org>
> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> Cc: Dmitry Osipenko <digetx@gmail.com>
> Cc: netdev@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: platform-driver-x86@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-rpi-kernel@lists.infradead.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-samsung-soc@vger.kernel.org
> Cc: linux-tegra@vger.kernel.org
> Cc: linux-omap@vger.kernel.org
> 
> Daniel Lezcano (29):
>    thermal/core: Add a generic thermal_zone_get_trip() function
>    thermal/sysfs: Always expose hysteresis attributes
>    thermal/core: Add a generic thermal_zone_set_trip() function
>    thermal/core/governors: Use thermal_zone_get_trip() instead of ops
>      functions
>    thermal/of: Use generic thermal_zone_get_trip() function
>    thermal/of: Remove unused functions
>    thermal/drivers/exynos: Use generic thermal_zone_get_trip() function
>    thermal/drivers/exynos: of_thermal_get_ntrips()
>    thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by
>      thermal_zone_get_trip()
>    thermal/drivers/tegra: Use generic thermal_zone_get_trip() function
>    thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function
>    thermal/drivers/hisi: Use generic thermal_zone_get_trip() function
>    thermal/drivers/qcom: Use generic thermal_zone_get_trip() function
>    thermal/drivers/armada: Use generic thermal_zone_get_trip() function
>    thermal/drivers/rcar_gen3: Use the generic function to get the number
>      of trips
>    thermal/of: Remove of_thermal_get_ntrips()
>    thermal/of: Remove of_thermal_is_trip_valid()
>    thermal/of: Remove of_thermal_set_trip_hyst()
>    thermal/of: Remove of_thermal_get_crit_temp()
>    thermal/drivers/st: Use generic trip points
>    thermal/drivers/imx: Use generic thermal_zone_get_trip() function
>    thermal/drivers/rcar: Use generic thermal_zone_get_trip() function
>    thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function
>    thermal/drivers/da9062: Use generic thermal_zone_get_trip() function
>    thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() /
>      ti_thermal_trip_is_valid()
>    thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function
>    thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function
>    thermal/intel/int340x: Replace parameter to simplify
>    thermal/drivers/intel: Use generic thermal_zone_get_trip() function
> 
>   drivers/net/ethernet/chelsio/cxgb4/cxgb4.h    |   2 -
>   .../ethernet/chelsio/cxgb4/cxgb4_thermal.c    |  41 +----
>   drivers/platform/x86/acerhdf.c                |  73 +++-----
>   drivers/thermal/armada_thermal.c              |  39 ++---
>   drivers/thermal/broadcom/bcm2835_thermal.c    |   8 +-
>   drivers/thermal/da9062-thermal.c              |  52 +-----
>   drivers/thermal/gov_bang_bang.c               |  39 +++--
>   drivers/thermal/gov_fair_share.c              |  18 +-
>   drivers/thermal/gov_power_allocator.c         |  51 +++---
>   drivers/thermal/gov_step_wise.c               |  22 ++-
>   drivers/thermal/hisi_thermal.c                |  11 +-
>   drivers/thermal/imx_thermal.c                 |  72 +++-----
>   .../int340x_thermal/int340x_thermal_zone.c    |  33 ++--
>   .../int340x_thermal/int340x_thermal_zone.h    |   4 +-
>   .../processor_thermal_device.c                |  10 +-
>   drivers/thermal/intel/x86_pkg_temp_thermal.c  | 120 +++++++------
>   drivers/thermal/qcom/qcom-spmi-temp-alarm.c   |  39 ++---
>   drivers/thermal/rcar_gen3_thermal.c           |   2 +-
>   drivers/thermal/rcar_thermal.c                |  53 +-----
>   drivers/thermal/samsung/exynos_tmu.c          |  57 +++----
>   drivers/thermal/st/st_thermal.c               |  47 +----
>   drivers/thermal/tegra/soctherm.c              |  33 ++--
>   drivers/thermal/tegra/tegra30-tsensor.c       |  17 +-
>   drivers/thermal/thermal_core.c                | 161 +++++++++++++++---
>   drivers/thermal/thermal_core.h                |  24 +--
>   drivers/thermal/thermal_helpers.c             |  28 +--
>   drivers/thermal/thermal_netlink.c             |  21 +--
>   drivers/thermal/thermal_of.c                  | 116 -------------
>   drivers/thermal/thermal_sysfs.c               | 133 +++++----------
>   drivers/thermal/ti-soc-thermal/ti-thermal.h   |  15 --
>   drivers/thermal/uniphier_thermal.c            |  27 ++-
>   include/linux/thermal.h                       |  10 ++
>   32 files changed, 560 insertions(+), 818 deletions(-)
>
Rafael J. Wysocki Sept. 29, 2022, 1:58 p.m. UTC | #2
On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
>
> Hi Rafael,
>
> are you happy with the changes?

I'll have a look and let you know.

> I would like to integrate those changes with the thermal pull request

Sure, but it looks like you've got only a few ACKs for these patches
from the driver people.

Wouldn't it be prudent to give them some more time to review the changes?

> On 28/09/2022 23:00, Daniel Lezcano wrote:
> > This work is the pre-requisite of handling correctly when the trip
> > point are crossed. For that we need to rework how the trip points are
> > declared and assigned to a thermal zone.
> >
> > Even if it appears to be a common sense to have the trip points being
> > ordered, this no guarantee neither documentation telling that is the
> > case.
> >
> > One solution could have been to create an ordered array of trips built
> > when registering the thermal zone by calling the different get_trip*
> > ops. However those ops receive a thermal zone pointer which is not
> > known as it is in the process of creating it.
> >
> > This cyclic dependency shows we have to rework how we manage the trip
> > points.
> >
> > Actually, all the trip points definition can be common to the backend
> > sensor drivers and we can factor out the thermal trip structure in all
> > of them.
> >
> > Then, as we register the thermal trips array, they will be available
> > in the thermal zone structure and a core function can return the trip
> > given its id.
> >
> > The get_trip_* ops won't be needed anymore and could be removed. The
> > resulting code will be another step forward to a self encapsulated
> > generic thermal framework.
> >
> > Most of the drivers can be converted more or less easily. This series
> > does a first round with most of the drivers. Some remain and will be
> > converted but with a smaller set of changes as the conversion is a bit
> > more complex.
> >
> > Changelog:
> >   v7:
> >      - Added missing return 0 in the x86_pkg_temp driver
> >   v6:
> >      - Improved the code for the get_crit_temp() function as suggested by Rafael
> >      - Removed inner parenthesis in the set_trip_temp() function and invert the
> >        conditions. Check the type of the trip point is unchanged
> >      - Folded patch 4 with 1
> >      - Add per thermal zone info message in the bang-bang governor
> >      - Folded the fix for an uninitialized variable in int340x_thermal_zone_add()
> >   v5:
> >      - Fixed a deadlock when calling thermal_zone_get_trip() while
> >        handling the thermal zone lock
> >      - Remove an extra line in the sysfs change
> >      - Collected tags
> > v4:
> >     - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski
> >     - Collected tags
> >   v3:
> >     - Reorg the series to be git-bisect safe
> >     - Added the set_trip generic function
> >     - Added the get_crit_temp generic function
> >     - Removed more dead code in the thermal-of
> >     - Fixed the exynos changelog
> >     - Fixed the error check for the exynos drivers
> >     - Collected tags
> >   v2:
> >     - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip()
> >     - Removed tab whitespace in the acerhdf driver
> >     - Collected tags
> >
> > Cc: Raju Rangoju <rajur@chelsio.com>
> > Cc: "David S. Miller" <davem@davemloft.net>
> > Cc: Eric Dumazet <edumazet@google.com>
> > Cc: Jakub Kicinski <kuba@kernel.org>
> > Cc: Paolo Abeni <pabeni@redhat.com>
> > Cc: Peter Kaestle <peter@piie.net>
> > Cc: Hans de Goede <hdegoede@redhat.com>
> > Cc: Mark Gross <markgross@kernel.org>
> > Cc: Miquel Raynal <miquel.raynal@bootlin.com>
> > Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Amit Kucheria <amitk@kernel.org>
> > Cc: Zhang Rui <rui.zhang@intel.com>
> > Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
> > Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
> > Cc: Florian Fainelli <f.fainelli@gmail.com>
> > Cc: Ray Jui <rjui@broadcom.com>
> > Cc: Scott Branden <sbranden@broadcom.com>
> > Cc: Support Opensource <support.opensource@diasemi.com>
> > Cc: Lukasz Luba <lukasz.luba@arm.com>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> > Cc: Fabio Estevam <festevam@gmail.com>
> > Cc: NXP Linux Team <linux-imx@nxp.com>
> > Cc: Thara Gopinath <thara.gopinath@linaro.org>
> > Cc: Andy Gross <agross@kernel.org>
> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
> > Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Cc: Alim Akhtar <alim.akhtar@samsung.com>
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: Jonathan Hunter <jonathanh@nvidia.com>
> > Cc: Eduardo Valentin <edubezval@gmail.com>
> > Cc: Keerthy <j-keerthy@ti.com>
> > Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> > Cc: Masami Hiramatsu <mhiramat@kernel.org>
> > Cc: Antoine Tenart <atenart@kernel.org>
> > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> > Cc: Dmitry Osipenko <digetx@gmail.com>
> > Cc: netdev@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > Cc: platform-driver-x86@vger.kernel.org
> > Cc: linux-pm@vger.kernel.org
> > Cc: linux-rpi-kernel@lists.infradead.org
> > Cc: linux-arm-kernel@lists.infradead.org
> > Cc: linux-arm-msm@vger.kernel.org
> > Cc: linux-renesas-soc@vger.kernel.org
> > Cc: linux-samsung-soc@vger.kernel.org
> > Cc: linux-tegra@vger.kernel.org
> > Cc: linux-omap@vger.kernel.org
> >
> > Daniel Lezcano (29):
> >    thermal/core: Add a generic thermal_zone_get_trip() function
> >    thermal/sysfs: Always expose hysteresis attributes
> >    thermal/core: Add a generic thermal_zone_set_trip() function
> >    thermal/core/governors: Use thermal_zone_get_trip() instead of ops
> >      functions
> >    thermal/of: Use generic thermal_zone_get_trip() function
> >    thermal/of: Remove unused functions
> >    thermal/drivers/exynos: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/exynos: of_thermal_get_ntrips()
> >    thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by
> >      thermal_zone_get_trip()
> >    thermal/drivers/tegra: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/hisi: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/qcom: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/armada: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/rcar_gen3: Use the generic function to get the number
> >      of trips
> >    thermal/of: Remove of_thermal_get_ntrips()
> >    thermal/of: Remove of_thermal_is_trip_valid()
> >    thermal/of: Remove of_thermal_set_trip_hyst()
> >    thermal/of: Remove of_thermal_get_crit_temp()
> >    thermal/drivers/st: Use generic trip points
> >    thermal/drivers/imx: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/rcar: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/da9062: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() /
> >      ti_thermal_trip_is_valid()
> >    thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function
> >    thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function
> >    thermal/intel/int340x: Replace parameter to simplify
> >    thermal/drivers/intel: Use generic thermal_zone_get_trip() function
> >
> >   drivers/net/ethernet/chelsio/cxgb4/cxgb4.h    |   2 -
> >   .../ethernet/chelsio/cxgb4/cxgb4_thermal.c    |  41 +----
> >   drivers/platform/x86/acerhdf.c                |  73 +++-----
> >   drivers/thermal/armada_thermal.c              |  39 ++---
> >   drivers/thermal/broadcom/bcm2835_thermal.c    |   8 +-
> >   drivers/thermal/da9062-thermal.c              |  52 +-----
> >   drivers/thermal/gov_bang_bang.c               |  39 +++--
> >   drivers/thermal/gov_fair_share.c              |  18 +-
> >   drivers/thermal/gov_power_allocator.c         |  51 +++---
> >   drivers/thermal/gov_step_wise.c               |  22 ++-
> >   drivers/thermal/hisi_thermal.c                |  11 +-
> >   drivers/thermal/imx_thermal.c                 |  72 +++-----
> >   .../int340x_thermal/int340x_thermal_zone.c    |  33 ++--
> >   .../int340x_thermal/int340x_thermal_zone.h    |   4 +-
> >   .../processor_thermal_device.c                |  10 +-
> >   drivers/thermal/intel/x86_pkg_temp_thermal.c  | 120 +++++++------
> >   drivers/thermal/qcom/qcom-spmi-temp-alarm.c   |  39 ++---
> >   drivers/thermal/rcar_gen3_thermal.c           |   2 +-
> >   drivers/thermal/rcar_thermal.c                |  53 +-----
> >   drivers/thermal/samsung/exynos_tmu.c          |  57 +++----
> >   drivers/thermal/st/st_thermal.c               |  47 +----
> >   drivers/thermal/tegra/soctherm.c              |  33 ++--
> >   drivers/thermal/tegra/tegra30-tsensor.c       |  17 +-
> >   drivers/thermal/thermal_core.c                | 161 +++++++++++++++---
> >   drivers/thermal/thermal_core.h                |  24 +--
> >   drivers/thermal/thermal_helpers.c             |  28 +--
> >   drivers/thermal/thermal_netlink.c             |  21 +--
> >   drivers/thermal/thermal_of.c                  | 116 -------------
> >   drivers/thermal/thermal_sysfs.c               | 133 +++++----------
> >   drivers/thermal/ti-soc-thermal/ti-thermal.h   |  15 --
> >   drivers/thermal/uniphier_thermal.c            |  27 ++-
> >   include/linux/thermal.h                       |  10 ++
> >   32 files changed, 560 insertions(+), 818 deletions(-)
> >
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
Daniel Lezcano Sept. 29, 2022, 2:57 p.m. UTC | #3
On 29/09/2022 15:58, Rafael J. Wysocki wrote:
> On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano
> <daniel.lezcano@linaro.org> wrote:
>>
>>
>> Hi Rafael,
>>
>> are you happy with the changes?
> 
> I'll have a look and let you know.

Great, thanks
> 
>> I would like to integrate those changes with the thermal pull request
> 
> Sure, but it looks like you've got only a few ACKs for these patches
> from the driver people.
> 
> Wouldn't it be prudent to give them some more time to review the changes?

Well I would say I received the ACKs from the drivers which are actively 
maintained. Others are either not with a dedicated maintainer or not a 
reactive one. The first iteration of the series is from August 5th. So 
it has been 2 months.

I pinged for imx, armada and tegra two weeks ago.

The st, hisilicon drivers fall under the thermal maintainers umbrella

There are three series coming after this series to be posted. I would 
like to go forward in the process of cleaning up the framework. IMO two 
months is enough to let the maintainers pay attention to the changes, 
especially if we do a gentle ping and there are seven versions.

And after that comes the thermal_zone_device_register() parameters 
simplification :)

[ ... ]
Rafael J. Wysocki Sept. 29, 2022, 7:35 p.m. UTC | #4
On Thu, Sep 29, 2022 at 4:57 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> On 29/09/2022 15:58, Rafael J. Wysocki wrote:
> > On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano
> > <daniel.lezcano@linaro.org> wrote:
> >>
> >>
> >> Hi Rafael,
> >>
> >> are you happy with the changes?
> >
> > I'll have a look and let you know.
>
> Great, thanks

Well, because you have not added the history of changes to the
patches, that will take more time than it would otherwise.

Generally, please always add information on what has changed in the
patch between different versions of it.

> >> I would like to integrate those changes with the thermal pull request
> >
> > Sure, but it looks like you've got only a few ACKs for these patches
> > from the driver people.
> >
> > Wouldn't it be prudent to give them some more time to review the changes?
>
> Well I would say I received the ACKs from the drivers which are actively
> maintained. Others are either not with a dedicated maintainer or not a
> reactive one. The first iteration of the series is from August 5th. So
> it has been 2 months.
>
> I pinged for imx, armada and tegra two weeks ago.

OK

> The st, hisilicon drivers fall under the thermal maintainers umbrella
>
> There are three series coming after this series to be posted. I would
> like to go forward in the process of cleaning up the framework. IMO two
> months is enough to let the maintainers pay attention to the changes,
> especially if we do a gentle ping and there are seven versions.
>
> And after that comes the thermal_zone_device_register() parameters
> simplification :)

Well, that's all fine, but I don't want people to get surprised by
significant changes they haven't expected and I want to avoid missing
anything subtle.
Rafael J. Wysocki Sept. 30, 2022, 5:39 p.m. UTC | #5
On Thu, Sep 29, 2022 at 9:35 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
>
> On Thu, Sep 29, 2022 at 4:57 PM Daniel Lezcano
> <daniel.lezcano@linaro.org> wrote:
> >
> > On 29/09/2022 15:58, Rafael J. Wysocki wrote:
> > > On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano
> > > <daniel.lezcano@linaro.org> wrote:
> > >>
> > >>
> > >> Hi Rafael,
> > >>
> > >> are you happy with the changes?
> > >
> > > I'll have a look and let you know.
> >
> > Great, thanks
>
> Well, because you have not added the history of changes to the
> patches, that will take more time than it would otherwise.

Done.  I've sent ACKs and still had a comment on one patch (minor but
still).  When that is addressed, the four initial core patches should
be good to go in.

I'm trusting you regarding the thermal/of changes (even though I think
that it would be good if someone involved in that code could review
them) and if you are confident about all of the driver changes, they
are fine with me too.
Lukasz Luba Oct. 3, 2022, 7:32 a.m. UTC | #6
Hi Rafael and Daniel

On 9/30/22 18:39, Rafael J. Wysocki wrote:
> On Thu, Sep 29, 2022 at 9:35 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
>>
>> On Thu, Sep 29, 2022 at 4:57 PM Daniel Lezcano
>> <daniel.lezcano@linaro.org> wrote:
>>>
>>> On 29/09/2022 15:58, Rafael J. Wysocki wrote:
>>>> On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano
>>>> <daniel.lezcano@linaro.org> wrote:
>>>>>
>>>>>
>>>>> Hi Rafael,
>>>>>
>>>>> are you happy with the changes?
>>>>
>>>> I'll have a look and let you know.
>>>
>>> Great, thanks
>>
>> Well, because you have not added the history of changes to the
>> patches, that will take more time than it would otherwise.
> 
> Done.  I've sent ACKs and still had a comment on one patch (minor but
> still).  When that is addressed, the four initial core patches should
> be good to go in.
> 
> I'm trusting you regarding the thermal/of changes (even though I think
> that it would be good if someone involved in that code could review
> them) and if you are confident about all of the driver changes, they
> are fine with me too.

Sorry for being late. I have been busy with some internal bug hunting.
I'll check the code today and test it on my dev boards.

Regards,
Lukasz