Show patches with: State = Action Required       |   11464 patches
« 1 2 ... 6 7 8 … 114 115 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
drm/exynos: Add check for dma_set_max_seg_size drm/exynos: Add check for dma_set_max_seg_size - - - --- 2024-04-29 Chen Ni New
[v3,4/4] arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator Enable UFS on gs101 / Pixel 6 (Oriole) - - - --- 2024-04-26 Peter Griffin New
[v3,3/4] arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes Enable UFS on gs101 / Pixel 6 (Oriole) 1 - - --- 2024-04-26 Peter Griffin New
[v3,2/4] arm64: dts: exynos: gs101: Add the hsi2 sysreg node Enable UFS on gs101 / Pixel 6 (Oriole) - 1 - --- 2024-04-26 Peter Griffin New
[v2,2/2] pinctrl: samsung: support a bus clock clock support for Samsung Exynos pin controller (Google Tensor gs101) - - - --- 2024-04-26 André Draszik New
[v2,1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock clock support for Samsung Exynos pin controller (Google Tensor gs101) - - - --- 2024-04-26 André Draszik New
[v2,3/5] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller HSI0 and HSI2 support for Google Tensor gs101 - 2 - --- 2024-04-26 André Draszik New
[v2,1/5] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit HSI0 and HSI2 support for Google Tensor gs101 - 2 - --- 2024-04-26 André Draszik New
[v2] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE [v2] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE - - - --- 2024-04-26 Marek Szyprowski New
[2/2] pinctrl: samsung: support a bus clock clock support for Samsung Exynos pin controller (Google Tensor gs101) - - - --- 2024-04-25 André Draszik New
[1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock clock support for Samsung Exynos pin controller (Google Tensor gs101) - - - --- 2024-04-25 André Draszik New
clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE - - - --- 2024-04-25 Marek Szyprowski New
[v2,08/14] scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option HSI2, UFS & UFS phy support for Tensor GS101 1 - 1 --- 2024-04-23 Peter Griffin New
[v2,07/14] clk: samsung: gs101: add support for cmu_hsi2 HSI2, UFS & UFS phy support for Tensor GS101 - - - --- 2024-04-23 Peter Griffin New
[v2,06/14] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes HSI2, UFS & UFS phy support for Tensor GS101 1 - - --- 2024-04-23 Peter Griffin New
[v2,05/14] arm64: dts: exynos: gs101: Add the hsi2 sysreg node HSI2, UFS & UFS phy support for Tensor GS101 - 1 - --- 2024-04-23 Peter Griffin New
[v2,04/14] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller HSI2, UFS & UFS phy support for Tensor GS101 - 1 - --- 2024-04-23 Peter Griffin New
[v2,03/14] dt-bindings: ufs: exynos-ufs: Add gs101 compatible HSI2, UFS & UFS phy support for Tensor GS101 - - - --- 2024-04-23 Peter Griffin New
[v2,01/14] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit HSI2, UFS & UFS phy support for Tensor GS101 - 2 - --- 2024-04-23 Peter Griffin New
drm/exynos: fix .get_modes return value in case of errors drm/exynos: fix .get_modes return value in case of errors - - - --- 2024-04-23 Marek Szyprowski New
[7/7] phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS) USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[6/7] phy: exynos5-usbdrd: convert to clk_bulk for phy (register) access USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[5/7] phy: exynos5-usbdrd: uniform order of register bit macros USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[4/7] phy: exynos5-usbdrd: set ref clk freq in exynos850_usbdrd_utmi_init() USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[3/7] phy: exynos5-usbdrd: support isolating HS and SS ports independently USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[2/7] phy: exynos5-usbdrd: use exynos_get_pmu_regmap_by_phandle() for PMU regs USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[1/7] dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[3/3] clk: samsung: clk-gs101: add cmu_hsi0 HSI0 support for Google Tensor gs101 - - - --- 2024-04-23 André Draszik New
[v3,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers [v3,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers - - - --- 2024-04-17 Anand Moon New
gpu: drm: exynos: hdmi: eliminate uses of of_node_put() gpu: drm: exynos: hdmi: eliminate uses of of_node_put() - - - --- 2024-04-15 Shivani Gupta New
arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage 6 2 - --- 2024-04-12 Rob Herring (Arm) New
[12/17] scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option HSI2, UFS & UFS phy support for Tensor GS101 1 - 1 --- 2024-04-04 Peter Griffin New
[08/17] clk: samsung: gs101: add support for cmu_hsi2 HSI2, UFS & UFS phy support for Tensor GS101 - - - --- 2024-04-04 Peter Griffin New
[07/17] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes HSI2, UFS & UFS phy support for Tensor GS101 - - - --- 2024-04-04 Peter Griffin New
[06/17] arm64: dts: exynos: gs101: Add the hsi2 sysreg node HSI2, UFS & UFS phy support for Tensor GS101 - - - --- 2024-04-04 Peter Griffin New
[05/17] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller HSI2, UFS & UFS phy support for Tensor GS101 - 1 - --- 2024-04-04 Peter Griffin New
[03/17] dt-bindings: ufs: exynos-ufs: Add gs101 compatible HSI2, UFS & UFS phy support for Tensor GS101 - - - --- 2024-04-04 Peter Griffin New
[01/17] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit HSI2, UFS & UFS phy support for Tensor GS101 - 1 - --- 2024-04-04 Peter Griffin New
[v2,6/6] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() [v2,1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers - - - --- 2024-04-04 Anand Moon New
[v2,5/6] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function [v2,1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers - - - --- 2024-04-04 Anand Moon New
[v2,4/6] usb: ohci-exynos: Switch from CONFIG_PM guards to pm_ptr() [v2,1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers 1 - - --- 2024-04-04 Anand Moon New
[v2,3/6] usb: ohci-exynos: Use devm_clk_get_enabled() helpers [v2,1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers - - - --- 2024-04-04 Anand Moon New
[v2,2/6] usb: ehci-exynos: Switch from CONFIG_PM guards to pm_ptr() [v2,1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers 1 - - --- 2024-04-04 Anand Moon New
[v2,1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers [v2,1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers - - - --- 2024-04-04 Anand Moon New
[v2,2/2] PM / devfreq: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() [v2,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers - - - --- 2024-04-03 Anand Moon New
[v2,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers [v2,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers - - - --- 2024-04-03 Anand Moon New
[2/2] cpufreq: scmi: Update Energy Model with allowed performance limits Update Energy Model with perfromance limits - 1 - --- 2024-04-03 Lukasz Luba New
[1/2] PM: EM: Add min/max available performance state limits Update Energy Model with perfromance limits - - - --- 2024-04-03 Lukasz Luba New
[31/34] spi: remove incorrect of_match_ptr annotations address all -Wunused-const warnings - 1 - --- 2024-04-03 Arnd Bergmann New
[v4,4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage Update Energy Model after chip binning adjusted voltages - 1 - --- 2024-04-02 Lukasz Luba New
[v4,1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM Update Energy Model after chip binning adjusted voltages 1 - - --- 2024-04-02 Lukasz Luba New
[21/23] mpi3mr: switch to using ->device_configure [01/23] block: add a helper to cancel atomic queue limit updates - 2 - --- 2024-04-02 Christoph Hellwig New
[20/23] libata: switch to using ->device_configure [01/23] block: add a helper to cancel atomic queue limit updates 1 2 - --- 2024-04-02 Christoph Hellwig New
clk: s2mps11: Check of_clk_add_hw_provider() result clk: s2mps11: Check of_clk_add_hw_provider() result - - - --- 2024-04-01 Aleksandr Aprelkov New
[REVIEW] hwrng: add exynos Secure World RNG device driver [REVIEW] hwrng: add exynos Secure World RNG device driver - - - --- 2024-03-28 Alexey Klimov New
[v3,3/3] clk: samsung: gs101: propagate PERIC0 USI SPI clock rate clk: samsung: introduce nMUX to reparent MUX clocks 1 1 - --- 2024-03-28 Tudor Ambarus Under Review
[v3,1/3] clk: samsung: introduce nMUX for MUX clks that can reparented clk: samsung: introduce nMUX to reparent MUX clocks - 1 - --- 2024-03-28 Tudor Ambarus Under Review
[v3,4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage Update Energy Model after chip binning adjusted voltages - 1 - --- 2024-03-28 Lukasz Luba New
[v3,3/4] PM: EM: Add em_dev_update_chip_binning() Update Energy Model after chip binning adjusted voltages - - - --- 2024-03-28 Lukasz Luba New
[v3,1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM Update Energy Model after chip binning adjusted voltages 1 - - --- 2024-03-28 Lukasz Luba New
spi: s3c64xx: Use DMA mode from fifo size spi: s3c64xx: Use DMA mode from fifo size - 1 - --- 2024-03-27 Jaewon Kim New
[v2,3/3] clk: samsung: gs101: propagate PERIC0 USI SPI clock rate clk: samsung: introduce nMUX to reparent MUX clocks 1 1 - --- 2024-03-26 Tudor Ambarus New
[v2,1/3] clk: samsung: introduce nMUX for MUX clks that can reparented clk: samsung: introduce nMUX to reparent MUX clocks - - - --- 2024-03-26 Tudor Ambarus New
[v2,2/4] arm64: dts: exynos: gs101: order pinctrl-* props alphabetically arm64: dts: exynos: gs101: define all PERIC USI nodes - 1 - --- 2024-03-26 Tudor Ambarus New
[v2,1/4] arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi arm64: dts: exynos: gs101: define all PERIC USI nodes - 3 - --- 2024-03-26 Tudor Ambarus New
[21/23] mpi3mr: switch to using ->device_configure [01/23] block: don't reject too large max_user_setors in blk_validate_limits - 1 - --- 2024-03-24 Christoph Hellwig New
[20/23] libata: switch to using ->device_configure [01/23] block: don't reject too large max_user_setors in blk_validate_limits 1 1 - --- 2024-03-24 Christoph Hellwig New
[10/23] scsi: add a device_configure method to the host template [01/23] block: don't reject too large max_user_setors in blk_validate_limits - 1 - --- 2024-03-24 Christoph Hellwig New
[09/23] scsi: use the atomic queue limits API in scsi_add_lun [01/23] block: don't reject too large max_user_setors in blk_validate_limits - 3 - --- 2024-03-24 Christoph Hellwig New
[64/64] i2c: reword i2c_algorithm in drivers according to newest specification i2c: reword i2c_algorithm according to newest specification 4 1 - --- 2024-03-22 Wolfram Sang New
[RESEND,v2,4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage Update Energy Model after chip binning adjusted voltages - 1 - --- 2024-03-22 Lukasz Luba New
[RESEND,v2,3/4] PM: EM: Add em_dev_update_chip_binning() Update Energy Model after chip binning adjusted voltages - - - --- 2024-03-22 Lukasz Luba New
[RESEND,v2,1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM Update Energy Model after chip binning adjusted voltages 1 - - --- 2024-03-22 Lukasz Luba New
[v2,4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage Update Energy Model after chip binning adjusted voltages - - - --- 2024-03-22 Lukasz Luba New
[v2,3/4] PM: EM: Add em_dev_update_chip_binning() Update Energy Model after chip binning adjusted voltages - - - --- 2024-03-22 Lukasz Luba New
[v2,1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM Update Energy Model after chip binning adjusted voltages - - - --- 2024-03-22 Lukasz Luba New
[3/3] power: reset: add new gs101-poweroff driver [1/3] dt-bindings: power: reset: add gs101 poweroff bindings - - - --- 2024-03-20 Alexey Klimov New
[2/3] arm64: dts: exynos: gs101: add poweroff node [1/3] dt-bindings: power: reset: add gs101 poweroff bindings - - - --- 2024-03-20 Alexey Klimov New
[1/3] dt-bindings: power: reset: add gs101 poweroff bindings [1/3] dt-bindings: power: reset: add gs101 poweroff bindings - - - --- 2024-03-20 Alexey Klimov New
[04/11] drm/exynos: Use drm_driver_legacy_fb_format() for fbdev drm: Only try to set formats supported by the hardware - - - --- 2024-03-17 Frej Drejhammar New
[4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage Update Energy Model after chip binning adjusted voltages - - - --- 2024-03-14 Lukasz Luba New
[3/4] PM: EM: Add em_dev_update_chip_binning() Update Energy Model after chip binning adjusted voltages - - - --- 2024-03-14 Lukasz Luba New
[1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM Update Energy Model after chip binning adjusted voltages - - - --- 2024-03-14 Lukasz Luba New
dt-bindings: display: samsung,exynos5-dp: convert to DT Schema dt-bindings: display: samsung,exynos5-dp: convert to DT Schema - - - --- 2024-03-13 Krzysztof Kozlowski New
arm64: dts: exynos: gs101: define all PERIC USI nodes arm64: dts: exynos: gs101: define all PERIC USI nodes - 1 - --- 2024-03-07 Tudor Ambarus New
arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi - 1 - --- 2024-03-07 Tudor Ambarus New
[v3] i2c: exynos5: Init data before registering interrupt handler [v3] i2c: exynos5: Init data before registering interrupt handler - 1 - --- 2024-03-05 Jesper Nilsson New
[v2] i2c: exynos5: Init data before registering interrupt handler [v2] i2c: exynos5: Init data before registering interrupt handler - 1 - --- 2024-03-04 Jesper Nilsson New
i2c: exynos5: Init data before registering interrupt handler i2c: exynos5: Init data before registering interrupt handler - - - --- 2024-03-04 Jesper Nilsson New
[v2,1/4] gpu: drm: replace of_graph_get_next_endpoint() of: replace of_graph_get_next_endpoint() - 1 - --- 2024-03-04 Kuninori Morimoto New
[v1,4/4] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() [v1,1/4] usb: ehci-exynos: Use devm_clk_get_enabled() helpers - - - --- 2024-03-01 Anand Moon New
[v1,3/4] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function [v1,1/4] usb: ehci-exynos: Use devm_clk_get_enabled() helpers - - - --- 2024-03-01 Anand Moon New
[v1,2/4] usb: ehci-exynos: Switch from CONFIG_PM guards to pm_ptr() [v1,1/4] usb: ehci-exynos: Use devm_clk_get_enabled() helpers - - - --- 2024-03-01 Anand Moon New
[v1,1/4] usb: ehci-exynos: Use devm_clk_get_enabled() helpers [v1,1/4] usb: ehci-exynos: Use devm_clk_get_enabled() helpers - - - --- 2024-03-01 Anand Moon New
[4/4] clk: samsung: exynos850: fix propagation of SPI IPCLK rate clk: samsung: introduce nMUX to reparent MUX clocks - - - --- 2024-02-29 Tudor Ambarus New
[3/4] clk: samsung: gs101: propagate PERIC0 USI SPI clock rate clk: samsung: introduce nMUX to reparent MUX clocks - - - --- 2024-02-29 Tudor Ambarus New
[1/4] clk: samsung: introduce nMUX for MUX clks that can reparented clk: samsung: introduce nMUX to reparent MUX clocks - - - --- 2024-02-29 Tudor Ambarus New
[PATCHv1,2/2] PM / devfreq: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() [PATCHv1,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers - - - --- 2024-02-26 Anand Moon New
[PATCHv1,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers [PATCHv1,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers - - - --- 2024-02-26 Anand Moon New
drm/exynos: use KMEM_CACHE() to create g2d_runqueue_node cache drm/exynos: use KMEM_CACHE() to create g2d_runqueue_node cache - - - --- 2024-02-26 Kunwu New
« 1 2 ... 6 7 8 … 114 115 »