diff mbox

pci: exynos: split into two parts such as Synopsys part and Exynos part

Message ID 000201ce7959$bf0fb150$3d2f13f0$@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jingoo Han July 5, 2013, 8:29 a.m. UTC
Exynos PCIe IP consists of Synopsys specific part and Exynos
specific part. Only core block is a Synopsys designware part;
other parts are Exynos specific.
Also, the Synopsys designware part can be shared with other
platforms; thus, it can be split two parts such as Synopsys
designware part and Exynos specific part.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
---
 drivers/pci/host/Makefile          |    1 +
 drivers/pci/host/pcie-designware.c |  907 +++++++-----------------------------
 drivers/pci/host/pcie-designware.h |   72 +++
 drivers/pci/host/pcie-exynos.c     |  619 ++++++++++++++++++++++++
 4 files changed, 862 insertions(+), 737 deletions(-)
 create mode 100644 drivers/pci/host/pcie-designware.h
 create mode 100644 drivers/pci/host/pcie-exynos.c

Comments

Pratyush ANAND July 5, 2013, 10:44 a.m. UTC | #1
On 7/5/2013 1:59 PM, Jingoo Han wrote:
> Exynos PCIe IP consists of Synopsys specific part and Exynos
> specific part. Only core block is a Synopsys designware part;
> other parts are Exynos specific.
> Also, the Synopsys designware part can be shared with other
> platforms; thus, it can be split two parts such as Synopsys
> designware part and Exynos specific part.
>

A quick and nice job :)
Just few minor comments.

> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> Cc: Pratyush Anand <pratyush.anand@st.com>
> Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
> ---
>   drivers/pci/host/Makefile          |    1 +
>   drivers/pci/host/pcie-designware.c |  907 +++++++-----------------------------
>   drivers/pci/host/pcie-designware.h |   72 +++
>   drivers/pci/host/pcie-exynos.c     |  619 ++++++++++++++++++++++++
>   4 files changed, 862 insertions(+), 737 deletions(-)
>   create mode 100644 drivers/pci/host/pcie-designware.h
>   create mode 100644 drivers/pci/host/pcie-exynos.c
>

[...]


> -
> -struct pcie_port {
> -       struct device           *dev;
> -       u8                      controller;
> -       u8                      root_bus_nr;
> -       void __iomem            *dbi_base;
> -       void __iomem            *elbi_base;
> -       void __iomem            *phy_base;
> -       void __iomem            *purple_base;

Just for knowledge, what is the purple_base. It might not be needed by 
all vendors. Can we explain the name in comment or can give some generic 
name?

> -       u64                     cfg0_base;
> -       void __iomem            *va_cfg0_base;
> -       u64                     cfg1_base;
> -       void __iomem            *va_cfg1_base;
> -       u64                     io_base;
> -       u64                     mem_base;
> -       spinlock_t              conf_lock;
> -       struct resource         cfg;
> -       struct resource         io;
> -       struct resource         mem;
> -       struct pcie_port_info   config;
> -       struct clk              *clk;
> -       struct clk              *bus_clk;
> -       int                     irq;
> -       int                     reset_gpio;
> -};
> -

[...]

> -
> -static inline void readl_rc(struct pcie_port *pp, void *dbi_base, u32 *val)
> +static inline void dw_pcie_readl_rc(struct pcie_port *pp, void *dbi_base,
> +                               u32 *val)

dbi_base is part of pp. So why to pass 3 args?

>   {
> -       exynos_pcie_sideband_dbi_r_mode(pp, true);
> -       *val = readl(dbi_base);
> -       exynos_pcie_sideband_dbi_r_mode(pp, false);
> -       return;
> +       if (pp->ops->readl_rc)
> +               pp->ops->readl_rc(pp, dbi_base, val);

ditto

> +       else
> +               *val = readl(dbi_base);
>   }
>
> -static inline void writel_rc(struct pcie_port *pp, u32 val, void *dbi_base)
> +static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val,
> +                               void *dbi_base)

ditto

>   {
> -       exynos_pcie_sideband_dbi_w_mode(pp, true);
> -       writel(val, dbi_base);
> -       exynos_pcie_sideband_dbi_w_mode(pp, false);
> -       return;
> +       if (pp->ops->writel_rc)
> +               pp->ops->writel_rc(pp, val, dbi_base);

ditto

> +       else
> +               writel(val, dbi_base);
>   }


Regards
Pratyush
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Arnd Bergmann July 5, 2013, 10:45 a.m. UTC | #2
On Friday 05 July 2013, Jingoo Han wrote:

> --- /dev/null
> +++ b/drivers/pci/host/pcie-exynos.c

> +
> +/* PCIe ELBI registers */
> +#define PCIE_IRQ_PULSE			0x000
> +#define IRQ_INTA_ASSERT			(0x1 << 0)
> +#define IRQ_INTB_ASSERT			(0x1 << 2)
> +#define IRQ_INTC_ASSERT			(0x1 << 4)
> +#define IRQ_INTD_ASSERT			(0x1 << 6)
> +#define PCIE_IRQ_LEVEL			0x004
> +#define PCIE_IRQ_SPECIAL		0x008
> +#define PCIE_IRQ_EN_PULSE		0x00c
> +#define PCIE_IRQ_EN_LEVEL		0x010
> +#define PCIE_IRQ_EN_SPECIAL		0x014
> +#define PCIE_PWR_RESET			0x018
> +#define PCIE_CORE_RESET			0x01c
> +#define PCIE_CORE_RESET_ENABLE		(0x1 << 0)
> +#define PCIE_STICKY_RESET		0x020
> +#define PCIE_NONSTICKY_RESET		0x024
> +#define PCIE_APP_INIT_RESET		0x028
> +#define PCIE_APP_LTSSM_ENABLE		0x02c
> +#define PCIE_ELBI_RDLH_LINKUP		0x064
> +#define PCIE_ELBI_LTSSM_ENABLE		0x1
> +#define PCIE_ELBI_SLV_AWMISC		0x11c
> +#define PCIE_ELBI_SLV_ARMISC		0x120
> +#define PCIE_ELBI_SLV_DBI_ENABLE	(0x1 << 21)
> +
> +/* PCIe Purple registers */
> +#define PCIE_PHY_GLOBAL_RESET		0x000
> +#define PCIE_PHY_COMMON_RESET		0x004
> +#define PCIE_PHY_CMN_REG		0x008
> +#define PCIE_PHY_MAC_RESET		0x00c
> +#define PCIE_PHY_PLL_LOCKED		0x010
> +#define PCIE_PHY_TRSVREG_RESET		0x020
> +#define PCIE_PHY_TRSV_RESET		0x024
> +
> +/* PCIe PHY registers */
> +#define PCIE_PHY_IMPEDANCE		0x004
> +#define PCIE_PHY_PLL_DIV_0		0x008
> +#define PCIE_PHY_PLL_BIAS		0x00c
> +#define PCIE_PHY_DCC_FEEDBACK		0x014
> +#define PCIE_PHY_PLL_DIV_1		0x05c
> +#define PCIE_PHY_TRSV0_EMP_LVL		0x084
> +#define PCIE_PHY_TRSV0_DRV_LVL		0x088
> +#define PCIE_PHY_TRSV0_RXCDR		0x0ac
> +#define PCIE_PHY_TRSV0_LVCC		0x0dc
> +#define PCIE_PHY_TRSV1_EMP_LVL		0x144
> +#define PCIE_PHY_TRSV1_RXCDR		0x16c
> +#define PCIE_PHY_TRSV1_LVCC		0x19c
> +#define PCIE_PHY_TRSV2_EMP_LVL		0x204
> +#define PCIE_PHY_TRSV2_RXCDR		0x22c
> +#define PCIE_PHY_TRSV2_LVCC		0x25c
> +#define PCIE_PHY_TRSV3_EMP_LVL		0x2c4
> +#define PCIE_PHY_TRSV3_RXCDR		0x2ec
> +#define PCIE_PHY_TRSV3_LVCC		0x31c

Are you sure these are all exynos specific? Maybe they are licensed
from someone else?

> +
> +	pp->dbi_base = devm_ioremap(&pdev->dev, pp->cfg.start,
> +				resource_size(&pp->cfg));
> +	if (!pp->dbi_base) {
> +		dev_err(&pdev->dev, "error with ioremap\n");
> +		return -ENOMEM;
> +	}
> +
> +	pp->root_bus_nr = -1;
> +	pp->ops = &exynos_pcie_host_ops;
> +
> +	spin_lock_init(&pp->conf_lock);
> +	dw_pcie_host_init(pp);
> +	pp->va_cfg0_base = devm_ioremap(&pdev->dev, pp->cfg0_base,
> +					pp->config.cfg0_size);
> +	if (!pp->va_cfg0_base) {
> +		dev_err(pp->dev, "error with ioremap in function\n");
> +		return -ENOMEM;
> +	}
> +	pp->va_cfg1_base = devm_ioremap(&pdev->dev, pp->cfg1_base,
> +					pp->config.cfg1_size);
> +	if (!pp->va_cfg1_base) {
> +		dev_err(pp->dev, "error with ioremap\n");
> +		return -ENOMEM;
> +	}

I think the configuration space handling should go into the
dw_pcie_host_init function, as that part would be needed by all drivers.

> +static int __init exynos_pcie_probe(struct platform_device *pdev)
> +{
> +	struct pcie_port *pp;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct of_pci_range range;
> +	struct of_pci_range_parser parser;
> +	int ret;
> +
> +	pp = devm_kzalloc(&pdev->dev, sizeof(*pp), GFP_KERNEL);
> +	if (!pp) {
> +		dev_err(&pdev->dev, "no memory for pcie port\n");
> +		return -ENOMEM;
> +	}
> +
> +	pp->dev = &pdev->dev;
> +
> +	if (of_pci_range_parser_init(&parser, np)) {
> +		dev_err(&pdev->dev, "missing ranges property\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Get the I/O and memory ranges from DT */
> +	for_each_of_pci_range(&parser, &range) {
> +		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
> +		if (restype == IORESOURCE_IO) {
> +			of_pci_range_to_resource(&range, np, &pp->io);
> +			pp->io.name = "I/O";
> +			pp->io.start = max_t(resource_size_t,
> +					     PCIBIOS_MIN_IO,
> +					     range.pci_addr + global_io_offset);
> +			pp->io.end = min_t(resource_size_t,
> +					   IO_SPACE_LIMIT,
> +					   range.pci_addr + range.size
> +					   + global_io_offset);
> +			pp->config.io_size = resource_size(&pp->io);
> +			pp->config.io_bus_addr = range.pci_addr;
> +		}
> +		if (restype == IORESOURCE_MEM) {
> +			of_pci_range_to_resource(&range, np, &pp->mem);
> +			pp->mem.name = "MEM";
> +			pp->config.mem_size = resource_size(&pp->mem);
> +			pp->config.mem_bus_addr = range.pci_addr;
> +		}
> +		if (restype == 0) {
> +			of_pci_range_to_resource(&range, np, &pp->cfg);
> +			pp->config.cfg0_size = resource_size(&pp->cfg)/2;
> +			pp->config.cfg1_size = resource_size(&pp->cfg)/2;
> +		}
> +	}

Same for these: it would be better to split up the probe function here
and move all of the above into the common code.

> +	pp->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);

I assume the reset logic would need to remain exynos specific

> +	pp->clk = devm_clk_get(&pdev->dev, "pcie");
> +	if (IS_ERR(pp->clk)) {
> +		dev_err(&pdev->dev, "Failed to get pcie rc clock\n");
> +		return PTR_ERR(pp->clk);
> +	}
> +	ret = clk_prepare_enable(pp->clk);
> +	if (ret)
> +		return ret;
> +
> +	pp->bus_clk = devm_clk_get(&pdev->dev, "pcie_bus");
> +	if (IS_ERR(pp->bus_clk)) {
> +		dev_err(&pdev->dev, "Failed to get pcie bus clock\n");
> +		ret = PTR_ERR(pp->bus_clk);
> +		goto fail_clk;
> +	}
> +	ret = clk_prepare_enable(pp->bus_clk);
> +	if (ret)
> +		goto fail_clk;

For the clocks, I think we can keep them in the common code, but
make them optional, i.e. do not fail the probe function if the clocks
don't exist, i.e. you get -ENOENT from devm_clk_get. We should however
still fail here if devm_clk_get returns a different error.

I also noticed an existing bug in your code here: if the clock controller
is not yet initialized, devm_clk_get() will return -EPROBE_DEFER,
which is broken in combination with platform_driver_probe. In order
to fix that, just change the code to use platform_driver_register
so it has the option to retry the probe after the clock controller
is initialized.
That should be a separate patch.

> +static int exynos_pcie_abort(unsigned long addr, unsigned int fsr,
> +			struct pt_regs *regs)
> +{
> +	unsigned long pc = instruction_pointer(regs);
> +	unsigned long instr = *(unsigned long *)pc;
> +
> +	WARN_ONCE(1, "pcie abort\n");
> +
> +	/*
> +	 * If the instruction being executed was a read,
> +	 * make it look like it read all-ones.
> +	 */
> +	if ((instr & 0x0c100000) == 0x04100000) {
> +		int reg = (instr >> 12) & 15;
> +		unsigned long val;
> +
> +		if (instr & 0x00400000)
> +			val = 255;
> +		else
> +			val = -1;
> +
> +		regs->uregs[reg] = val;
> +		regs->ARM_pc += 4;
> +		return 0;
> +	}
> +
> +	if ((instr & 0x0e100090) == 0x00100090) {
> +		int reg = (instr >> 12) & 15;
> +
> +		regs->uregs[reg] = -1;
> +		regs->ARM_pc += 4;
> +		return 0;
> +	}
> +
> +	return 1;
> +}

Another observation that is only partially related: the abort handler logic
is not specific to either exynos nor synopsys. However it is specific
to ARM and should not be part of a driver that is potentially architecture
independent. I would recommend moving this to a separate file
"arm-pci-abort.c" or something like that. I notice that a lot of the other
ARM PCI implementations have the exact same code but also need to reset
the abort in the bridge. Can you confirm that a) you don't need to tell
the root port about the abort and b) the abort handler is actually required
for exynos? How often do you run into this?

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jingoo Han July 8, 2013, 5:06 a.m. UTC | #3
On Friday, July 05, 2013 7:44 PM, Pratyush Anand wrote:
> On 7/5/2013 1:59 PM, Jingoo Han wrote:
> > Exynos PCIe IP consists of Synopsys specific part and Exynos
> > specific part. Only core block is a Synopsys designware part;
> > other parts are Exynos specific.
> > Also, the Synopsys designware part can be shared with other
> > platforms; thus, it can be split two parts such as Synopsys
> > designware part and Exynos specific part.
> >
> 
> A quick and nice job :)
> Just few minor comments.

Thank you.
Without your comment, it could be done. :)

> 
> > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> > Cc: Pratyush Anand <pratyush.anand@st.com>
> > Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
> > ---
> >   drivers/pci/host/Makefile          |    1 +
> >   drivers/pci/host/pcie-designware.c |  907 +++++++-----------------------------
> >   drivers/pci/host/pcie-designware.h |   72 +++
> >   drivers/pci/host/pcie-exynos.c     |  619 ++++++++++++++++++++++++
> >   4 files changed, 862 insertions(+), 737 deletions(-)
> >   create mode 100644 drivers/pci/host/pcie-designware.h
> >   create mode 100644 drivers/pci/host/pcie-exynos.c
> >
> 
> [...]
> 
> 
> > -
> > -struct pcie_port {
> > -       struct device           *dev;
> > -       u8                      controller;
> > -       u8                      root_bus_nr;
> > -       void __iomem            *dbi_base;
> > -       void __iomem            *elbi_base;
> > -       void __iomem            *phy_base;
> > -       void __iomem            *purple_base;
> 
> Just for knowledge, what is the purple_base. It might not be needed by
> all vendors. Can we explain the name in comment or can give some generic
> name?

purple_base is a register to control PCIe block.

For example, controlling various reset control signals, 
PLL lock indication, etc.

Generic name would be 'block_base' or 'misc_base'?


> 
> > -       u64                     cfg0_base;
> > -       void __iomem            *va_cfg0_base;
> > -       u64                     cfg1_base;
> > -       void __iomem            *va_cfg1_base;
> > -       u64                     io_base;
> > -       u64                     mem_base;
> > -       spinlock_t              conf_lock;
> > -       struct resource         cfg;
> > -       struct resource         io;
> > -       struct resource         mem;
> > -       struct pcie_port_info   config;
> > -       struct clk              *clk;
> > -       struct clk              *bus_clk;
> > -       int                     irq;
> > -       int                     reset_gpio;
> > -};
> > -
> 
> [...]
> 
> > -
> > -static inline void readl_rc(struct pcie_port *pp, void *dbi_base, u32 *val)
> > +static inline void dw_pcie_readl_rc(struct pcie_port *pp, void *dbi_base,
> > +                               u32 *val)
> 
> dbi_base is part of pp. So why to pass 3 args?

OK, I see.
I will use 2 args.

Best regards,
Jingoo Han



--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jingoo Han July 8, 2013, 5:13 a.m. UTC | #4
On Monday, July 08, 2013 2:06 PM, Jingoo Han wrote:
> On Friday, July 05, 2013 7:44 PM, Pratyush Anand wrote:
> > On 7/5/2013 1:59 PM, Jingoo Han wrote:
> > > Exynos PCIe IP consists of Synopsys specific part and Exynos
> > > specific part. Only core block is a Synopsys designware part;
> > > other parts are Exynos specific.
> > > Also, the Synopsys designware part can be shared with other
> > > platforms; thus, it can be split two parts such as Synopsys
> > > designware part and Exynos specific part.
> > >
> >
> > A quick and nice job :)
> > Just few minor comments.
> 
> Thank you.
> Without your comment, it could be done. :)

Oops, it is a typo.
Without your comment, it could 'NOT' be done. :)

Thank you for your comment.
It is very helpful.

Best regards,
Jingoo Han


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jingoo Han July 8, 2013, 6:55 a.m. UTC | #5
On Friday, July 05, 2013 7:44 PM, Pratyush Anand wrote:
> On 7/5/2013 1:59 PM, Jingoo Han wrote:
> > Exynos PCIe IP consists of Synopsys specific part and Exynos
> > specific part. Only core block is a Synopsys designware part;
> > other parts are Exynos specific.
> > Also, the Synopsys designware part can be shared with other
> > platforms; thus, it can be split two parts such as Synopsys
> > designware part and Exynos specific part.
> >
> 
> A quick and nice job :)
> Just few minor comments.
> 
> > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> > Cc: Pratyush Anand <pratyush.anand@st.com>
> > Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
> > ---
> >   drivers/pci/host/Makefile          |    1 +
> >   drivers/pci/host/pcie-designware.c |  907 +++++++-----------------------------
> >   drivers/pci/host/pcie-designware.h |   72 +++
> >   drivers/pci/host/pcie-exynos.c     |  619 ++++++++++++++++++++++++
> >   4 files changed, 862 insertions(+), 737 deletions(-)
> >   create mode 100644 drivers/pci/host/pcie-designware.h
> >   create mode 100644 drivers/pci/host/pcie-exynos.c
> >

[...]

> > -static inline void readl_rc(struct pcie_port *pp, void *dbi_base, u32 *val)
> > +static inline void dw_pcie_readl_rc(struct pcie_port *pp, void *dbi_base,
> > +                               u32 *val)
> 
> dbi_base is part of pp. So why to pass 3 args?

Sorry, this variable does not mean dbi_base;
it means 'dbi_base + offset'.

dw_pcie_{readl/writel}_rc() are called as below:

  dw_pcie_readl_rc(pp, dbi_base + PCIE_PORT_LINK_CONTROL, &val);
  dw_pcie_writel_rc(pp, val, dbi_base + PCIE_PORT_LINK_CONTROL);

Thus, 'dbi_base' can be replaced with 'dbi_addr'.


Best regards,
Jingoo Han


> 
> >   {
> > -       exynos_pcie_sideband_dbi_r_mode(pp, true);
> > -       *val = readl(dbi_base);
> > -       exynos_pcie_sideband_dbi_r_mode(pp, false);
> > -       return;
> > +       if (pp->ops->readl_rc)
> > +               pp->ops->readl_rc(pp, dbi_base, val);
> 
> ditto
> 
> > +       else
> > +               *val = readl(dbi_base);
> >   }
> >
> > -static inline void writel_rc(struct pcie_port *pp, u32 val, void *dbi_base)
> > +static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val,
> > +                               void *dbi_base)
> 
> ditto
> 
> >   {
> > -       exynos_pcie_sideband_dbi_w_mode(pp, true);
> > -       writel(val, dbi_base);
> > -       exynos_pcie_sideband_dbi_w_mode(pp, false);
> > -       return;
> > +       if (pp->ops->writel_rc)
> > +               pp->ops->writel_rc(pp, val, dbi_base);
> 
> ditto
> 
> > +       else
> > +               writel(val, dbi_base);
> >   }
> 
> 
> Regards
> Pratyush

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jingoo Han July 9, 2013, 1:13 a.m. UTC | #6
On Friday, July 05, 2013 7:46 PM, Arnd Bergmann wrote:
> On Friday 05 July 2013, Jingoo Han wrote:
> 
> > --- /dev/null
> > +++ b/drivers/pci/host/pcie-exynos.c
> 
> > +
> > +/* PCIe ELBI registers */
> > +#define PCIE_IRQ_PULSE			0x000
> > +#define IRQ_INTA_ASSERT			(0x1 << 0)
> > +#define IRQ_INTB_ASSERT			(0x1 << 2)
> > +#define IRQ_INTC_ASSERT			(0x1 << 4)
> > +#define IRQ_INTD_ASSERT			(0x1 << 6)
> > +#define PCIE_IRQ_LEVEL			0x004
> > +#define PCIE_IRQ_SPECIAL		0x008
> > +#define PCIE_IRQ_EN_PULSE		0x00c
> > +#define PCIE_IRQ_EN_LEVEL		0x010
> > +#define PCIE_IRQ_EN_SPECIAL		0x014
> > +#define PCIE_PWR_RESET			0x018
> > +#define PCIE_CORE_RESET			0x01c
> > +#define PCIE_CORE_RESET_ENABLE		(0x1 << 0)
> > +#define PCIE_STICKY_RESET		0x020
> > +#define PCIE_NONSTICKY_RESET		0x024
> > +#define PCIE_APP_INIT_RESET		0x028
> > +#define PCIE_APP_LTSSM_ENABLE		0x02c
> > +#define PCIE_ELBI_RDLH_LINKUP		0x064
> > +#define PCIE_ELBI_LTSSM_ENABLE		0x1
> > +#define PCIE_ELBI_SLV_AWMISC		0x11c
> > +#define PCIE_ELBI_SLV_ARMISC		0x120
> > +#define PCIE_ELBI_SLV_DBI_ENABLE	(0x1 << 21)
> > +
> > +/* PCIe Purple registers */
> > +#define PCIE_PHY_GLOBAL_RESET		0x000
> > +#define PCIE_PHY_COMMON_RESET		0x004
> > +#define PCIE_PHY_CMN_REG		0x008
> > +#define PCIE_PHY_MAC_RESET		0x00c
> > +#define PCIE_PHY_PLL_LOCKED		0x010
> > +#define PCIE_PHY_TRSVREG_RESET		0x020
> > +#define PCIE_PHY_TRSV_RESET		0x024
> > +
> > +/* PCIe PHY registers */
> > +#define PCIE_PHY_IMPEDANCE		0x004
> > +#define PCIE_PHY_PLL_DIV_0		0x008
> > +#define PCIE_PHY_PLL_BIAS		0x00c
> > +#define PCIE_PHY_DCC_FEEDBACK		0x014
> > +#define PCIE_PHY_PLL_DIV_1		0x05c
> > +#define PCIE_PHY_TRSV0_EMP_LVL		0x084
> > +#define PCIE_PHY_TRSV0_DRV_LVL		0x088
> > +#define PCIE_PHY_TRSV0_RXCDR		0x0ac
> > +#define PCIE_PHY_TRSV0_LVCC		0x0dc
> > +#define PCIE_PHY_TRSV1_EMP_LVL		0x144
> > +#define PCIE_PHY_TRSV1_RXCDR		0x16c
> > +#define PCIE_PHY_TRSV1_LVCC		0x19c
> > +#define PCIE_PHY_TRSV2_EMP_LVL		0x204
> > +#define PCIE_PHY_TRSV2_RXCDR		0x22c
> > +#define PCIE_PHY_TRSV2_LVCC		0x25c
> > +#define PCIE_PHY_TRSV3_EMP_LVL		0x2c4
> > +#define PCIE_PHY_TRSV3_RXCDR		0x2ec
> > +#define PCIE_PHY_TRSV3_LVCC		0x31c
> 
> Are you sure these are all exynos specific? Maybe they are licensed
> from someone else?

Samsung specific.

I asked our hardware engineer, and he confirmed it.


> 
> > +
> > +	pp->dbi_base = devm_ioremap(&pdev->dev, pp->cfg.start,
> > +				resource_size(&pp->cfg));
> > +	if (!pp->dbi_base) {
> > +		dev_err(&pdev->dev, "error with ioremap\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	pp->root_bus_nr = -1;
> > +	pp->ops = &exynos_pcie_host_ops;
> > +
> > +	spin_lock_init(&pp->conf_lock);
> > +	dw_pcie_host_init(pp);
> > +	pp->va_cfg0_base = devm_ioremap(&pdev->dev, pp->cfg0_base,
> > +					pp->config.cfg0_size);
> > +	if (!pp->va_cfg0_base) {
> > +		dev_err(pp->dev, "error with ioremap in function\n");
> > +		return -ENOMEM;
> > +	}
> > +	pp->va_cfg1_base = devm_ioremap(&pdev->dev, pp->cfg1_base,
> > +					pp->config.cfg1_size);
> > +	if (!pp->va_cfg1_base) {
> > +		dev_err(pp->dev, "error with ioremap\n");
> > +		return -ENOMEM;
> > +	}
> 
> I think the configuration space handling should go into the
> dw_pcie_host_init function, as that part would be needed by all drivers.

OK.
I will move it to dw_pcie_host_init().


> 
> > +static int __init exynos_pcie_probe(struct platform_device *pdev)
> > +{
> > +	struct pcie_port *pp;
> > +	struct device_node *np = pdev->dev.of_node;
> > +	struct of_pci_range range;
> > +	struct of_pci_range_parser parser;
> > +	int ret;
> > +
> > +	pp = devm_kzalloc(&pdev->dev, sizeof(*pp), GFP_KERNEL);
> > +	if (!pp) {
> > +		dev_err(&pdev->dev, "no memory for pcie port\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	pp->dev = &pdev->dev;
> > +
> > +	if (of_pci_range_parser_init(&parser, np)) {
> > +		dev_err(&pdev->dev, "missing ranges property\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	/* Get the I/O and memory ranges from DT */
> > +	for_each_of_pci_range(&parser, &range) {
> > +		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
> > +		if (restype == IORESOURCE_IO) {
> > +			of_pci_range_to_resource(&range, np, &pp->io);
> > +			pp->io.name = "I/O";
> > +			pp->io.start = max_t(resource_size_t,
> > +					     PCIBIOS_MIN_IO,
> > +					     range.pci_addr + global_io_offset);
> > +			pp->io.end = min_t(resource_size_t,
> > +					   IO_SPACE_LIMIT,
> > +					   range.pci_addr + range.size
> > +					   + global_io_offset);
> > +			pp->config.io_size = resource_size(&pp->io);
> > +			pp->config.io_bus_addr = range.pci_addr;
> > +		}
> > +		if (restype == IORESOURCE_MEM) {
> > +			of_pci_range_to_resource(&range, np, &pp->mem);
> > +			pp->mem.name = "MEM";
> > +			pp->config.mem_size = resource_size(&pp->mem);
> > +			pp->config.mem_bus_addr = range.pci_addr;
> > +		}
> > +		if (restype == 0) {
> > +			of_pci_range_to_resource(&range, np, &pp->cfg);
> > +			pp->config.cfg0_size = resource_size(&pp->cfg)/2;
> > +			pp->config.cfg1_size = resource_size(&pp->cfg)/2;
> > +		}
> > +	}
> 
> Same for these: it would be better to split up the probe function here
> and move all of the above into the common code.

OK.
I will move it to dw_pcie_host_init().

> 
> > +	pp->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
> 
> I assume the reset logic would need to remain exynos specific
> 
> > +	pp->clk = devm_clk_get(&pdev->dev, "pcie");
> > +	if (IS_ERR(pp->clk)) {
> > +		dev_err(&pdev->dev, "Failed to get pcie rc clock\n");
> > +		return PTR_ERR(pp->clk);
> > +	}
> > +	ret = clk_prepare_enable(pp->clk);
> > +	if (ret)
> > +		return ret;
> > +
> > +	pp->bus_clk = devm_clk_get(&pdev->dev, "pcie_bus");
> > +	if (IS_ERR(pp->bus_clk)) {
> > +		dev_err(&pdev->dev, "Failed to get pcie bus clock\n");
> > +		ret = PTR_ERR(pp->bus_clk);
> > +		goto fail_clk;
> > +	}
> > +	ret = clk_prepare_enable(pp->bus_clk);
> > +	if (ret)
> > +		goto fail_clk;
> 
> For the clocks, I think we can keep them in the common code, but
> make them optional, i.e. do not fail the probe function if the clocks
> don't exist, i.e. you get -ENOENT from devm_clk_get. We should however
> still fail here if devm_clk_get returns a different error.
> 
> I also noticed an existing bug in your code here: if the clock controller
> is not yet initialized, devm_clk_get() will return -EPROBE_DEFER,
> which is broken in combination with platform_driver_probe. In order
> to fix that, just change the code to use platform_driver_register
> so it has the option to retry the probe after the clock controller
> is initialized.
> That should be a separate patch.

If I should do it, I will send a separate patch.

> 
> > +static int exynos_pcie_abort(unsigned long addr, unsigned int fsr,
> > +			struct pt_regs *regs)
> > +{
> > +	unsigned long pc = instruction_pointer(regs);
> > +	unsigned long instr = *(unsigned long *)pc;
> > +
> > +	WARN_ONCE(1, "pcie abort\n");
> > +
> > +	/*
> > +	 * If the instruction being executed was a read,
> > +	 * make it look like it read all-ones.
> > +	 */
> > +	if ((instr & 0x0c100000) == 0x04100000) {
> > +		int reg = (instr >> 12) & 15;
> > +		unsigned long val;
> > +
> > +		if (instr & 0x00400000)
> > +			val = 255;
> > +		else
> > +			val = -1;
> > +
> > +		regs->uregs[reg] = val;
> > +		regs->ARM_pc += 4;
> > +		return 0;
> > +	}
> > +
> > +	if ((instr & 0x0e100090) == 0x00100090) {
> > +		int reg = (instr >> 12) & 15;
> > +
> > +		regs->uregs[reg] = -1;
> > +		regs->ARM_pc += 4;
> > +		return 0;
> > +	}
> > +
> > +	return 1;
> > +}
> 
> Another observation that is only partially related: the abort handler logic
> is not specific to either exynos nor synopsys. However it is specific
> to ARM and should not be part of a driver that is potentially architecture
> independent. I would recommend moving this to a separate file
> "arm-pci-abort.c" or something like that. I notice that a lot of the other
> ARM PCI implementations have the exact same code but also need to reset
> the abort in the bridge. Can you confirm that a) you don't need to tell
> the root port about the abort and b) the abort handler is actually required
> for exynos? How often do you run into this?

There is no special reason to add it.
I just referenced other ARM PCI drivers.
Also, I have never seen calling this abort function.

Then, I will remove it.

Thank you for your opinion. :)
Your comment is very helpful.

Best regards,
Jingoo Han


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I July 10, 2013, 2:02 p.m. UTC | #7
Hi,

On Friday 05 July 2013 01:59 PM, Jingoo Han wrote:
> Exynos PCIe IP consists of Synopsys specific part and Exynos
> specific part. Only core block is a Synopsys designware part;
> other parts are Exynos specific.
> Also, the Synopsys designware part can be shared with other
> platforms; thus, it can be split two parts such as Synopsys
> designware part and Exynos specific part.

Thanks for doing that :-)

I'll be using the synopsys specific part as Jacinto6 also uses the same pcie
core. Once I start implementing, I'll have some queries and comments ;-)

Cheers
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jingoo Han July 11, 2013, 1:36 a.m. UTC | #8
On Wednesday, July 10, 2013 11:02 PM, Kishon Vijay Abraham I:
> On Friday 05 July 2013 01:59 PM, Jingoo Han wrote:
> > Exynos PCIe IP consists of Synopsys specific part and Exynos
> > specific part. Only core block is a Synopsys designware part;
> > other parts are Exynos specific.
> > Also, the Synopsys designware part can be shared with other
> > platforms; thus, it can be split two parts such as Synopsys
> > designware part and Exynos specific part.
> 
> Thanks for doing that :-)
> 
> I'll be using the synopsys specific part as Jacinto6 also uses the same pcie
> core. Once I start implementing, I'll have some queries and comments ;-)

Hi Kishon,

OK, I see.
I will send v2 patch.
Also, I will be CC'ing you. :)


Best regards,
Jingoo Han


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 086d850..7e59864 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -1,2 +1,3 @@ 
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCI_EXYNOS) += pcie-exynos.o
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 26bdbda..48a52f5 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -1,5 +1,5 @@ 
 /*
- * PCIe host controller driver for Samsung EXYNOS SoCs
+ * Synopsys Designware PCIe host controller driver
  *
  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -11,64 +11,13 @@ 
  * published by the Free Software Foundation.
  */
 
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_gpio.h>
-#include <linux/of_pci.h>
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
-#include <linux/platform_device.h>
-#include <linux/resource.h>
-#include <linux/signal.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 
-struct pcie_port_info {
-	u32		cfg0_size;
-	u32		cfg1_size;
-	u32		io_size;
-	u32		mem_size;
-	phys_addr_t	io_bus_addr;
-	phys_addr_t	mem_bus_addr;
-};
-
-struct pcie_port {
-	struct device		*dev;
-	u8			controller;
-	u8			root_bus_nr;
-	void __iomem		*dbi_base;
-	void __iomem		*elbi_base;
-	void __iomem		*phy_base;
-	void __iomem		*purple_base;
-	u64			cfg0_base;
-	void __iomem		*va_cfg0_base;
-	u64			cfg1_base;
-	void __iomem		*va_cfg1_base;
-	u64			io_base;
-	u64			mem_base;
-	spinlock_t		conf_lock;
-	struct resource		cfg;
-	struct resource		io;
-	struct resource		mem;
-	struct pcie_port_info	config;
-	struct clk		*clk;
-	struct clk		*bus_clk;
-	int			irq;
-	int			reset_gpio;
-};
-
-/*
- * Exynos PCIe IP consists of Synopsys specific part and Exynos
- * specific part. Only core block is a Synopsys designware part;
- * other parts are Exynos specific.
- */
+#include "pcie-designware.h"
 
 /* Synopsis specific PCIE configuration registers */
 #define PCIE_PORT_LINK_CONTROL		0x710
@@ -108,69 +57,14 @@  struct pcie_port {
 #define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
 #define PCIE_ATU_UPPER_TARGET		0x91C
 
-/* Exynos specific PCIE configuration registers */
-
-/* PCIe ELBI registers */
-#define PCIE_IRQ_PULSE			0x000
-#define IRQ_INTA_ASSERT			(0x1 << 0)
-#define IRQ_INTB_ASSERT			(0x1 << 2)
-#define IRQ_INTC_ASSERT			(0x1 << 4)
-#define IRQ_INTD_ASSERT			(0x1 << 6)
-#define PCIE_IRQ_LEVEL			0x004
-#define PCIE_IRQ_SPECIAL		0x008
-#define PCIE_IRQ_EN_PULSE		0x00c
-#define PCIE_IRQ_EN_LEVEL		0x010
-#define PCIE_IRQ_EN_SPECIAL		0x014
-#define PCIE_PWR_RESET			0x018
-#define PCIE_CORE_RESET			0x01c
-#define PCIE_CORE_RESET_ENABLE		(0x1 << 0)
-#define PCIE_STICKY_RESET		0x020
-#define PCIE_NONSTICKY_RESET		0x024
-#define PCIE_APP_INIT_RESET		0x028
-#define PCIE_APP_LTSSM_ENABLE		0x02c
-#define PCIE_ELBI_RDLH_LINKUP		0x064
-#define PCIE_ELBI_LTSSM_ENABLE		0x1
-#define PCIE_ELBI_SLV_AWMISC		0x11c
-#define PCIE_ELBI_SLV_ARMISC		0x120
-#define PCIE_ELBI_SLV_DBI_ENABLE	(0x1 << 21)
-
-/* PCIe Purple registers */
-#define PCIE_PHY_GLOBAL_RESET		0x000
-#define PCIE_PHY_COMMON_RESET		0x004
-#define PCIE_PHY_CMN_REG		0x008
-#define PCIE_PHY_MAC_RESET		0x00c
-#define PCIE_PHY_PLL_LOCKED		0x010
-#define PCIE_PHY_TRSVREG_RESET		0x020
-#define PCIE_PHY_TRSV_RESET		0x024
-
-/* PCIe PHY registers */
-#define PCIE_PHY_IMPEDANCE		0x004
-#define PCIE_PHY_PLL_DIV_0		0x008
-#define PCIE_PHY_PLL_BIAS		0x00c
-#define PCIE_PHY_DCC_FEEDBACK		0x014
-#define PCIE_PHY_PLL_DIV_1		0x05c
-#define PCIE_PHY_TRSV0_EMP_LVL		0x084
-#define PCIE_PHY_TRSV0_DRV_LVL		0x088
-#define PCIE_PHY_TRSV0_RXCDR		0x0ac
-#define PCIE_PHY_TRSV0_LVCC		0x0dc
-#define PCIE_PHY_TRSV1_EMP_LVL		0x144
-#define PCIE_PHY_TRSV1_RXCDR		0x16c
-#define PCIE_PHY_TRSV1_LVCC		0x19c
-#define PCIE_PHY_TRSV2_EMP_LVL		0x204
-#define PCIE_PHY_TRSV2_RXCDR		0x22c
-#define PCIE_PHY_TRSV2_LVCC		0x25c
-#define PCIE_PHY_TRSV3_EMP_LVL		0x2c4
-#define PCIE_PHY_TRSV3_RXCDR		0x2ec
-#define PCIE_PHY_TRSV3_LVCC		0x31c
-
-static struct hw_pci exynos_pci;
+unsigned long global_io_offset;
 
 static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys)
 {
 	return sys->private_data;
 }
 
-static inline int cfg_read(void *addr, int where, int size, u32 *val)
+int cfg_read(void *addr, int where, int size, u32 *val)
 {
 	*val = readl(addr);
 
@@ -184,7 +78,7 @@  static inline int cfg_read(void *addr, int where, int size, u32 *val)
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static inline int cfg_write(void *addr, int where, int size, u32 val)
+int cfg_write(void *addr, int where, int size, u32 val)
 {
 	if (size == 4)
 		writel(val, addr);
@@ -198,155 +92,168 @@  static inline int cfg_write(void *addr, int where, int size, u32 val)
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static void exynos_pcie_sideband_dbi_w_mode(struct pcie_port *pp, bool on)
-{
-	u32 val;
-
-	if (on) {
-		val = readl(pp->elbi_base + PCIE_ELBI_SLV_AWMISC);
-		val |= PCIE_ELBI_SLV_DBI_ENABLE;
-		writel(val, pp->elbi_base + PCIE_ELBI_SLV_AWMISC);
-	} else {
-		val = readl(pp->elbi_base + PCIE_ELBI_SLV_AWMISC);
-		val &= ~PCIE_ELBI_SLV_DBI_ENABLE;
-		writel(val, pp->elbi_base + PCIE_ELBI_SLV_AWMISC);
-	}
-}
-
-static void exynos_pcie_sideband_dbi_r_mode(struct pcie_port *pp, bool on)
-{
-	u32 val;
-
-	if (on) {
-		val = readl(pp->elbi_base + PCIE_ELBI_SLV_ARMISC);
-		val |= PCIE_ELBI_SLV_DBI_ENABLE;
-		writel(val, pp->elbi_base + PCIE_ELBI_SLV_ARMISC);
-	} else {
-		val = readl(pp->elbi_base + PCIE_ELBI_SLV_ARMISC);
-		val &= ~PCIE_ELBI_SLV_DBI_ENABLE;
-		writel(val, pp->elbi_base + PCIE_ELBI_SLV_ARMISC);
-	}
-}
-
-static inline void readl_rc(struct pcie_port *pp, void *dbi_base, u32 *val)
+static inline void dw_pcie_readl_rc(struct pcie_port *pp, void *dbi_base,
+				u32 *val)
 {
-	exynos_pcie_sideband_dbi_r_mode(pp, true);
-	*val = readl(dbi_base);
-	exynos_pcie_sideband_dbi_r_mode(pp, false);
-	return;
+	if (pp->ops->readl_rc)
+		pp->ops->readl_rc(pp, dbi_base, val);
+	else
+		*val = readl(dbi_base);
 }
 
-static inline void writel_rc(struct pcie_port *pp, u32 val, void *dbi_base)
+static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val,
+				void *dbi_base)
 {
-	exynos_pcie_sideband_dbi_w_mode(pp, true);
-	writel(val, dbi_base);
-	exynos_pcie_sideband_dbi_w_mode(pp, false);
-	return;
+	if (pp->ops->writel_rc)
+		pp->ops->writel_rc(pp, val, dbi_base);
+	else
+		writel(val, dbi_base);
 }
 
-static int exynos_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
+int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
 				u32 *val)
 {
 	int ret;
 
-	exynos_pcie_sideband_dbi_r_mode(pp, true);
-	ret = cfg_read(pp->dbi_base + (where & ~0x3), where, size, val);
-	exynos_pcie_sideband_dbi_r_mode(pp, false);
+	if (pp->ops->rd_own_conf)
+		ret = pp->ops->rd_own_conf(pp, where, size, val);
+	else
+		ret = cfg_read(pp->dbi_base + (where & ~0x3), where, size, val);
+
 	return ret;
 }
 
-static int exynos_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
+int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
 				u32 val)
 {
 	int ret;
 
-	exynos_pcie_sideband_dbi_w_mode(pp, true);
-	ret = cfg_write(pp->dbi_base + (where & ~0x3), where, size, val);
-	exynos_pcie_sideband_dbi_w_mode(pp, false);
+	if (pp->ops->wr_own_conf)
+		ret = pp->ops->wr_own_conf(pp, where, size, val);
+	else
+		ret = cfg_write(pp->dbi_base + (where & ~0x3), where, size,
+				val);
+
 	return ret;
 }
 
-static void exynos_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
+int dw_pcie_link_up(struct pcie_port *pp)
+{
+	if (pp->ops->link_up)
+		return pp->ops->link_up(pp);
+	else
+		return 0;
+}
+
+void dw_pcie_host_init(struct pcie_port *pp)
+{
+	struct pcie_port_info *config = &pp->config;
+	u32 val;
+
+	/* Keep first 64K for IO */
+	pp->cfg0_base = pp->cfg.start;
+	pp->cfg1_base = pp->cfg.start + config->cfg0_size;
+	pp->io_base = pp->io.start;
+	pp->mem_base = pp->mem.start;
+
+	if (pp->ops->host_init)
+		pp->ops->host_init(pp);
+
+	dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
+
+	/* program correct class for RC */
+	dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
+
+	dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
+	val |= PORT_LOGIC_SPEED_CHANGE;
+	dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
+}
+
+static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
 {
 	u32 val;
 	void __iomem *dbi_base = pp->dbi_base;
 
 	/* Program viewport 0 : OUTBOUND : CFG0 */
 	val = PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0;
-	writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT);
-	writel_rc(pp, pp->cfg0_base, dbi_base + PCIE_ATU_LOWER_BASE);
-	writel_rc(pp, (pp->cfg0_base >> 32), dbi_base + PCIE_ATU_UPPER_BASE);
-	writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1,
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT);
+	dw_pcie_writel_rc(pp, pp->cfg0_base, dbi_base + PCIE_ATU_LOWER_BASE);
+	dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32),
+			dbi_base + PCIE_ATU_UPPER_BASE);
+	dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1,
 			dbi_base + PCIE_ATU_LIMIT);
-	writel_rc(pp, busdev, dbi_base + PCIE_ATU_LOWER_TARGET);
-	writel_rc(pp, 0, dbi_base + PCIE_ATU_UPPER_TARGET);
-	writel_rc(pp, PCIE_ATU_TYPE_CFG0, dbi_base + PCIE_ATU_CR1);
+	dw_pcie_writel_rc(pp, busdev, dbi_base + PCIE_ATU_LOWER_TARGET);
+	dw_pcie_writel_rc(pp, 0, dbi_base + PCIE_ATU_UPPER_TARGET);
+	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG0, dbi_base + PCIE_ATU_CR1);
 	val = PCIE_ATU_ENABLE;
-	writel_rc(pp, val, dbi_base + PCIE_ATU_CR2);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_ATU_CR2);
 }
 
-static void exynos_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
+static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
 {
 	u32 val;
 	void __iomem *dbi_base = pp->dbi_base;
 
 	/* Program viewport 1 : OUTBOUND : CFG1 */
 	val = PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1;
-	writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT);
-	writel_rc(pp, PCIE_ATU_TYPE_CFG1, dbi_base + PCIE_ATU_CR1);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT);
+	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, dbi_base + PCIE_ATU_CR1);
 	val = PCIE_ATU_ENABLE;
-	writel_rc(pp, val, dbi_base + PCIE_ATU_CR2);
-	writel_rc(pp, pp->cfg1_base, dbi_base + PCIE_ATU_LOWER_BASE);
-	writel_rc(pp, (pp->cfg1_base >> 32), dbi_base + PCIE_ATU_UPPER_BASE);
-	writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_ATU_CR2);
+	dw_pcie_writel_rc(pp, pp->cfg1_base, dbi_base + PCIE_ATU_LOWER_BASE);
+	dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32),
+			dbi_base + PCIE_ATU_UPPER_BASE);
+	dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
 			dbi_base + PCIE_ATU_LIMIT);
-	writel_rc(pp, busdev, dbi_base + PCIE_ATU_LOWER_TARGET);
-	writel_rc(pp, 0, dbi_base + PCIE_ATU_UPPER_TARGET);
+	dw_pcie_writel_rc(pp, busdev, dbi_base + PCIE_ATU_LOWER_TARGET);
+	dw_pcie_writel_rc(pp, 0, dbi_base + PCIE_ATU_UPPER_TARGET);
 }
 
-static void exynos_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
+static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
 {
 	u32 val;
 	void __iomem *dbi_base = pp->dbi_base;
 
 	/* Program viewport 0 : OUTBOUND : MEM */
 	val = PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0;
-	writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT);
-	writel_rc(pp, PCIE_ATU_TYPE_MEM, dbi_base + PCIE_ATU_CR1);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT);
+	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, dbi_base + PCIE_ATU_CR1);
 	val = PCIE_ATU_ENABLE;
-	writel_rc(pp, val, dbi_base + PCIE_ATU_CR2);
-	writel_rc(pp, pp->mem_base, dbi_base + PCIE_ATU_LOWER_BASE);
-	writel_rc(pp, (pp->mem_base >> 32), dbi_base + PCIE_ATU_UPPER_BASE);
-	writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_ATU_CR2);
+	dw_pcie_writel_rc(pp, pp->mem_base, dbi_base + PCIE_ATU_LOWER_BASE);
+	dw_pcie_writel_rc(pp, (pp->mem_base >> 32),
+			dbi_base + PCIE_ATU_UPPER_BASE);
+	dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
 			dbi_base + PCIE_ATU_LIMIT);
-	writel_rc(pp, pp->config.mem_bus_addr,
+	dw_pcie_writel_rc(pp, pp->config.mem_bus_addr,
 			dbi_base + PCIE_ATU_LOWER_TARGET);
-	writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
+	dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
 			dbi_base + PCIE_ATU_UPPER_TARGET);
 }
 
-static void exynos_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
+static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
 {
 	u32 val;
 	void __iomem *dbi_base = pp->dbi_base;
 
 	/* Program viewport 1 : OUTBOUND : IO */
 	val = PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1;
-	writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT);
-	writel_rc(pp, PCIE_ATU_TYPE_IO, dbi_base + PCIE_ATU_CR1);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_ATU_VIEWPORT);
+	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, dbi_base + PCIE_ATU_CR1);
 	val = PCIE_ATU_ENABLE;
-	writel_rc(pp, val, dbi_base + PCIE_ATU_CR2);
-	writel_rc(pp, pp->io_base, dbi_base + PCIE_ATU_LOWER_BASE);
-	writel_rc(pp, (pp->io_base >> 32), dbi_base + PCIE_ATU_UPPER_BASE);
-	writel_rc(pp, pp->io_base + pp->config.io_size - 1,
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_ATU_CR2);
+	dw_pcie_writel_rc(pp, pp->io_base, dbi_base + PCIE_ATU_LOWER_BASE);
+	dw_pcie_writel_rc(pp, (pp->io_base >> 32),
+			dbi_base + PCIE_ATU_UPPER_BASE);
+	dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
 			dbi_base + PCIE_ATU_LIMIT);
-	writel_rc(pp, pp->config.io_bus_addr,
+	dw_pcie_writel_rc(pp, pp->config.io_bus_addr,
 			dbi_base + PCIE_ATU_LOWER_TARGET);
-	writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
+	dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
 			dbi_base + PCIE_ATU_UPPER_TARGET);
 }
 
-static int exynos_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
+static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 		u32 devfn, int where, int size, u32 *val)
 {
 	int ret = PCIBIOS_SUCCESSFUL;
@@ -357,19 +264,19 @@  static int exynos_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 	address = where & ~0x3;
 
 	if (bus->parent->number == pp->root_bus_nr) {
-		exynos_pcie_prog_viewport_cfg0(pp, busdev);
+		dw_pcie_prog_viewport_cfg0(pp, busdev);
 		ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
-		exynos_pcie_prog_viewport_mem_outbound(pp);
+		dw_pcie_prog_viewport_mem_outbound(pp);
 	} else {
-		exynos_pcie_prog_viewport_cfg1(pp, busdev);
+		dw_pcie_prog_viewport_cfg1(pp, busdev);
 		ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
-		exynos_pcie_prog_viewport_io_outbound(pp);
+		dw_pcie_prog_viewport_io_outbound(pp);
 	}
 
 	return ret;
 }
 
-static int exynos_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
+static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 		u32 devfn, int where, int size, u32 val)
 {
 	int ret = PCIBIOS_SUCCESSFUL;
@@ -380,59 +287,25 @@  static int exynos_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 	address = where & ~0x3;
 
 	if (bus->parent->number == pp->root_bus_nr) {
-		exynos_pcie_prog_viewport_cfg0(pp, busdev);
+		dw_pcie_prog_viewport_cfg0(pp, busdev);
 		ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
-		exynos_pcie_prog_viewport_mem_outbound(pp);
+		dw_pcie_prog_viewport_mem_outbound(pp);
 	} else {
-		exynos_pcie_prog_viewport_cfg1(pp, busdev);
+		dw_pcie_prog_viewport_cfg1(pp, busdev);
 		ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
-		exynos_pcie_prog_viewport_io_outbound(pp);
+		dw_pcie_prog_viewport_io_outbound(pp);
 	}
 
 	return ret;
 }
 
-static unsigned long global_io_offset;
 
-static int exynos_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct pcie_port *pp;
-
-	pp = sys_to_pcie(sys);
-
-	if (!pp)
-		return 0;
-
-	if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
-		sys->io_offset = global_io_offset - pp->config.io_bus_addr;
-		pci_ioremap_io(sys->io_offset, pp->io.start);
-		global_io_offset += SZ_64K;
-		pci_add_resource_offset(&sys->resources, &pp->io,
-					sys->io_offset);
-	}
-
-	sys->mem_offset = pp->mem.start - pp->config.mem_bus_addr;
-	pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset);
-
-	return 1;
-}
-
-static int exynos_pcie_link_up(struct pcie_port *pp)
-{
-	u32 val = readl(pp->elbi_base + PCIE_ELBI_RDLH_LINKUP);
-
-	if (val == PCIE_ELBI_LTSSM_ENABLE)
-		return 1;
-
-	return 0;
-}
-
-static int exynos_pcie_valid_config(struct pcie_port *pp,
+static int dw_pcie_valid_config(struct pcie_port *pp,
 				struct pci_bus *bus, int dev)
 {
 	/* If there is no link, then there is no device */
 	if (bus->number != pp->root_bus_nr) {
-		if (!exynos_pcie_link_up(pp))
+		if (!dw_pcie_link_up(pp))
 			return 0;
 	}
 
@@ -450,7 +323,7 @@  static int exynos_pcie_valid_config(struct pcie_port *pp,
 	return 1;
 }
 
-static int exynos_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
 	struct pcie_port *pp = sys_to_pcie(bus->sysdata);
@@ -462,23 +335,23 @@  static int exynos_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 		return -EINVAL;
 	}
 
-	if (exynos_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {
+	if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
 	spin_lock_irqsave(&pp->conf_lock, flags);
 	if (bus->number != pp->root_bus_nr)
-		ret = exynos_pcie_rd_other_conf(pp, bus, devfn,
+		ret = dw_pcie_rd_other_conf(pp, bus, devfn,
 						where, size, val);
 	else
-		ret = exynos_pcie_rd_own_conf(pp, where, size, val);
+		ret = dw_pcie_rd_own_conf(pp, where, size, val);
 	spin_unlock_irqrestore(&pp->conf_lock, flags);
 
 	return ret;
 }
 
-static int exynos_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
 	struct pcie_port *pp = sys_to_pcie(bus->sysdata);
@@ -490,34 +363,56 @@  static int exynos_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 		return -EINVAL;
 	}
 
-	if (exynos_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
+	if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	spin_lock_irqsave(&pp->conf_lock, flags);
 	if (bus->number != pp->root_bus_nr)
-		ret = exynos_pcie_wr_other_conf(pp, bus, devfn,
+		ret = dw_pcie_wr_other_conf(pp, bus, devfn,
 						where, size, val);
 	else
-		ret = exynos_pcie_wr_own_conf(pp, where, size, val);
+		ret = dw_pcie_wr_own_conf(pp, where, size, val);
 	spin_unlock_irqrestore(&pp->conf_lock, flags);
 
 	return ret;
 }
 
-static struct pci_ops exynos_pcie_ops = {
-	.read = exynos_pcie_rd_conf,
-	.write = exynos_pcie_wr_conf,
+static struct pci_ops dw_pcie_ops = {
+	.read = dw_pcie_rd_conf,
+	.write = dw_pcie_wr_conf,
 };
 
-static struct pci_bus *exynos_pcie_scan_bus(int nr,
-					struct pci_sys_data *sys)
+int dw_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+
+	pp = sys_to_pcie(sys);
+
+	if (!pp)
+		return 0;
+
+	if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
+		sys->io_offset = global_io_offset - pp->config.io_bus_addr;
+		pci_ioremap_io(sys->io_offset, pp->io.start);
+		global_io_offset += SZ_64K;
+		pci_add_resource_offset(&sys->resources, &pp->io,
+					sys->io_offset);
+	}
+
+	sys->mem_offset = pp->mem.start - pp->config.mem_bus_addr;
+	pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset);
+
+	return 1;
+}
+
+struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct pci_bus *bus;
 	struct pcie_port *pp = sys_to_pcie(sys);
 
 	if (pp) {
 		pp->root_bus_nr = sys->busnr;
-		bus = pci_scan_root_bus(NULL, sys->busnr, &exynos_pcie_ops,
+		bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
 					sys, &sys->resources);
 	} else {
 		bus = NULL;
@@ -527,20 +422,20 @@  static struct pci_bus *exynos_pcie_scan_bus(int nr,
 	return bus;
 }
 
-static int exynos_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
 
 	return pp->irq;
 }
 
-static struct hw_pci exynos_pci = {
-	.setup		= exynos_pcie_setup,
-	.scan		= exynos_pcie_scan_bus,
-	.map_irq	= exynos_pcie_map_irq,
+struct hw_pci dw_pci = {
+	.setup		= dw_pcie_setup,
+	.scan		= dw_pcie_scan_bus,
+	.map_irq	= dw_pcie_map_irq,
 };
 
-static void exynos_pcie_setup_rc(struct pcie_port *pp)
+void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 	struct pcie_port_info *config = &pp->config;
 	void __iomem *dbi_base = pp->dbi_base;
@@ -549,509 +444,47 @@  static void exynos_pcie_setup_rc(struct pcie_port *pp)
 	u32 memlimit;
 
 	/* set the number of lines as 4 */
-	readl_rc(pp, dbi_base + PCIE_PORT_LINK_CONTROL, &val);
+	dw_pcie_readl_rc(pp, dbi_base + PCIE_PORT_LINK_CONTROL, &val);
 	val &= ~PORT_LINK_MODE_MASK;
 	val |= PORT_LINK_MODE_4_LANES;
-	writel_rc(pp, val, dbi_base + PCIE_PORT_LINK_CONTROL);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_PORT_LINK_CONTROL);
 
 	/* set link width speed control register */
-	readl_rc(pp, dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL, &val);
+	dw_pcie_readl_rc(pp, dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL, &val);
 	val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
 	val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
-	writel_rc(pp, val, dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
 
 	/* setup RC BARs */
-	writel_rc(pp, 0x00000004, dbi_base + PCI_BASE_ADDRESS_0);
-	writel_rc(pp, 0x00000004, dbi_base + PCI_BASE_ADDRESS_1);
+	dw_pcie_writel_rc(pp, 0x00000004, dbi_base + PCI_BASE_ADDRESS_0);
+	dw_pcie_writel_rc(pp, 0x00000004, dbi_base + PCI_BASE_ADDRESS_1);
 
 	/* setup interrupt pins */
-	readl_rc(pp, dbi_base + PCI_INTERRUPT_LINE, &val);
+	dw_pcie_readl_rc(pp, dbi_base + PCI_INTERRUPT_LINE, &val);
 	val &= 0xffff00ff;
 	val |= 0x00000100;
-	writel_rc(pp, val, dbi_base + PCI_INTERRUPT_LINE);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCI_INTERRUPT_LINE);
 
 	/* setup bus numbers */
-	readl_rc(pp, dbi_base + PCI_PRIMARY_BUS, &val);
+	dw_pcie_readl_rc(pp, dbi_base + PCI_PRIMARY_BUS, &val);
 	val &= 0xff000000;
 	val |= 0x00010100;
-	writel_rc(pp, val, dbi_base + PCI_PRIMARY_BUS);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCI_PRIMARY_BUS);
 
 	/* setup memory base, memory limit */
 	membase = ((u32)pp->mem_base & 0xfff00000) >> 16;
 	memlimit = (config->mem_size + (u32)pp->mem_base) & 0xfff00000;
 	val = memlimit | membase;
-	writel_rc(pp, val, dbi_base + PCI_MEMORY_BASE);
+	dw_pcie_writel_rc(pp, val, dbi_base + PCI_MEMORY_BASE);
 
 	/* setup command register */
-	readl_rc(pp, dbi_base + PCI_COMMAND, &val);
+	dw_pcie_readl_rc(pp, dbi_base + PCI_COMMAND, &val);
 	val &= 0xffff0000;
 	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 		PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
-	writel_rc(pp, val, dbi_base + PCI_COMMAND);
-}
-
-static void exynos_pcie_assert_core_reset(struct pcie_port *pp)
-{
-	u32 val;
-	void __iomem *elbi_base = pp->elbi_base;
-
-	val = readl(elbi_base + PCIE_CORE_RESET);
-	val &= ~PCIE_CORE_RESET_ENABLE;
-	writel(val, elbi_base + PCIE_CORE_RESET);
-	writel(0, elbi_base + PCIE_PWR_RESET);
-	writel(0, elbi_base + PCIE_STICKY_RESET);
-	writel(0, elbi_base + PCIE_NONSTICKY_RESET);
-}
-
-static void exynos_pcie_deassert_core_reset(struct pcie_port *pp)
-{
-	u32 val;
-	void __iomem *elbi_base = pp->elbi_base;
-	void __iomem *purple_base = pp->purple_base;
-
-	val = readl(elbi_base + PCIE_CORE_RESET);
-	val |= PCIE_CORE_RESET_ENABLE;
-	writel(val, elbi_base + PCIE_CORE_RESET);
-	writel(1, elbi_base + PCIE_STICKY_RESET);
-	writel(1, elbi_base + PCIE_NONSTICKY_RESET);
-	writel(1, elbi_base + PCIE_APP_INIT_RESET);
-	writel(0, elbi_base + PCIE_APP_INIT_RESET);
-	writel(1, purple_base + PCIE_PHY_MAC_RESET);
-}
-
-static void exynos_pcie_assert_phy_reset(struct pcie_port *pp)
-{
-	void __iomem *purple_base = pp->purple_base;
-
-	writel(0, purple_base + PCIE_PHY_MAC_RESET);
-	writel(1, purple_base + PCIE_PHY_GLOBAL_RESET);
-}
-
-static void exynos_pcie_deassert_phy_reset(struct pcie_port *pp)
-{
-	void __iomem *elbi_base = pp->elbi_base;
-	void __iomem *purple_base = pp->purple_base;
-
-	writel(0, purple_base + PCIE_PHY_GLOBAL_RESET);
-	writel(1, elbi_base + PCIE_PWR_RESET);
-	writel(0, purple_base + PCIE_PHY_COMMON_RESET);
-	writel(0, purple_base + PCIE_PHY_CMN_REG);
-	writel(0, purple_base + PCIE_PHY_TRSVREG_RESET);
-	writel(0, purple_base + PCIE_PHY_TRSV_RESET);
-}
-
-static void exynos_pcie_init_phy(struct pcie_port *pp)
-{
-	void __iomem *phy_base = pp->phy_base;
-
-	/* DCC feedback control off */
-	writel(0x29, phy_base + PCIE_PHY_DCC_FEEDBACK);
-
-	/* set TX/RX impedance */
-	writel(0xd5, phy_base + PCIE_PHY_IMPEDANCE);
-
-	/* set 50Mhz PHY clock */
-	writel(0x14, phy_base + PCIE_PHY_PLL_DIV_0);
-	writel(0x12, phy_base + PCIE_PHY_PLL_DIV_1);
-
-	/* set TX Differential output for lane 0 */
-	writel(0x7f, phy_base + PCIE_PHY_TRSV0_DRV_LVL);
-
-	/* set TX Pre-emphasis Level Control for lane 0 to minimum */
-	writel(0x0, phy_base + PCIE_PHY_TRSV0_EMP_LVL);
-
-	/* set RX clock and data recovery bandwidth */
-	writel(0xe7, phy_base + PCIE_PHY_PLL_BIAS);
-	writel(0x82, phy_base + PCIE_PHY_TRSV0_RXCDR);
-	writel(0x82, phy_base + PCIE_PHY_TRSV1_RXCDR);
-	writel(0x82, phy_base + PCIE_PHY_TRSV2_RXCDR);
-	writel(0x82, phy_base + PCIE_PHY_TRSV3_RXCDR);
-
-	/* change TX Pre-emphasis Level Control for lanes */
-	writel(0x39, phy_base + PCIE_PHY_TRSV0_EMP_LVL);
-	writel(0x39, phy_base + PCIE_PHY_TRSV1_EMP_LVL);
-	writel(0x39, phy_base + PCIE_PHY_TRSV2_EMP_LVL);
-	writel(0x39, phy_base + PCIE_PHY_TRSV3_EMP_LVL);
-
-	/* set LVCC */
-	writel(0x20, phy_base + PCIE_PHY_TRSV0_LVCC);
-	writel(0xa0, phy_base + PCIE_PHY_TRSV1_LVCC);
-	writel(0xa0, phy_base + PCIE_PHY_TRSV2_LVCC);
-	writel(0xa0, phy_base + PCIE_PHY_TRSV3_LVCC);
-}
-
-static void exynos_pcie_assert_reset(struct pcie_port *pp)
-{
-	if (pp->reset_gpio >= 0)
-		devm_gpio_request_one(pp->dev, pp->reset_gpio,
-				GPIOF_OUT_INIT_HIGH, "RESET");
-	return;
-}
-
-static int exynos_pcie_establish_link(struct pcie_port *pp)
-{
-	u32 val;
-	int count = 0;
-	void __iomem *elbi_base = pp->elbi_base;
-	void __iomem *purple_base = pp->purple_base;
-	void __iomem *phy_base = pp->phy_base;
-
-	if (exynos_pcie_link_up(pp)) {
-		dev_err(pp->dev, "Link already up\n");
-		return 0;
-	}
-
-	/* assert reset signals */
-	exynos_pcie_assert_core_reset(pp);
-	exynos_pcie_assert_phy_reset(pp);
-
-	/* de-assert phy reset */
-	exynos_pcie_deassert_phy_reset(pp);
-
-	/* initialize phy */
-	exynos_pcie_init_phy(pp);
-
-	/* pulse for common reset */
-	writel(1, purple_base + PCIE_PHY_COMMON_RESET);
-	udelay(500);
-	writel(0, purple_base + PCIE_PHY_COMMON_RESET);
-
-	/* de-assert core reset */
-	exynos_pcie_deassert_core_reset(pp);
-
-	/* setup root complex */
-	exynos_pcie_setup_rc(pp);
-
-	/* assert reset signal */
-	exynos_pcie_assert_reset(pp);
-
-	/* assert LTSSM enable */
-	writel(PCIE_ELBI_LTSSM_ENABLE, elbi_base + PCIE_APP_LTSSM_ENABLE);
-
-	/* check if the link is up or not */
-	while (!exynos_pcie_link_up(pp)) {
-		mdelay(100);
-		count++;
-		if (count == 10) {
-			while (readl(phy_base + PCIE_PHY_PLL_LOCKED) == 0) {
-				val = readl(purple_base + PCIE_PHY_PLL_LOCKED);
-				dev_info(pp->dev, "PLL Locked: 0x%x\n", val);
-			}
-			dev_err(pp->dev, "PCIe Link Fail\n");
-			return -EINVAL;
-		}
-	}
-
-	dev_info(pp->dev, "Link up\n");
-
-	return 0;
-}
-
-static void exynos_pcie_clear_irq_pulse(struct pcie_port *pp)
-{
-	u32 val;
-	void __iomem *elbi_base = pp->elbi_base;
-
-	val = readl(elbi_base + PCIE_IRQ_PULSE);
-	writel(val, elbi_base + PCIE_IRQ_PULSE);
-	return;
-}
-
-static void exynos_pcie_enable_irq_pulse(struct pcie_port *pp)
-{
-	u32 val;
-	void __iomem *elbi_base = pp->elbi_base;
-
-	/* enable INTX interrupt */
-	val = IRQ_INTA_ASSERT | IRQ_INTB_ASSERT |
-		IRQ_INTC_ASSERT | IRQ_INTD_ASSERT,
-	writel(val, elbi_base + PCIE_IRQ_EN_PULSE);
-	return;
-}
-
-static irqreturn_t exynos_pcie_irq_handler(int irq, void *arg)
-{
-	struct pcie_port *pp = arg;
-
-	exynos_pcie_clear_irq_pulse(pp);
-	return IRQ_HANDLED;
-}
-
-static void exynos_pcie_enable_interrupts(struct pcie_port *pp)
-{
-	exynos_pcie_enable_irq_pulse(pp);
-	return;
-}
-
-static void exynos_pcie_host_init(struct pcie_port *pp)
-{
-	struct pcie_port_info *config = &pp->config;
-	u32 val;
-
-	/* Keep first 64K for IO */
-	pp->cfg0_base = pp->cfg.start;
-	pp->cfg1_base = pp->cfg.start + config->cfg0_size;
-	pp->io_base = pp->io.start;
-	pp->mem_base = pp->mem.start;
-
-	/* enable link */
-	exynos_pcie_establish_link(pp);
-
-	exynos_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
-
-	/* program correct class for RC */
-	exynos_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
-
-	exynos_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
-	val |= PORT_LOGIC_SPEED_CHANGE;
-	exynos_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
-
-	exynos_pcie_enable_interrupts(pp);
-}
-
-static int add_pcie_port(struct pcie_port *pp, struct platform_device *pdev)
-{
-	struct resource *elbi_base;
-	struct resource *phy_base;
-	struct resource *purple_base;
-	int ret;
-
-	elbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!elbi_base) {
-		dev_err(&pdev->dev, "couldn't get elbi base resource\n");
-		return -EINVAL;
-	}
-	pp->elbi_base = devm_ioremap_resource(&pdev->dev, elbi_base);
-	if (IS_ERR(pp->elbi_base))
-		return PTR_ERR(pp->elbi_base);
-
-	phy_base = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!phy_base) {
-		dev_err(&pdev->dev, "couldn't get phy base resource\n");
-		return -EINVAL;
-	}
-	pp->phy_base = devm_ioremap_resource(&pdev->dev, phy_base);
-	if (IS_ERR(pp->phy_base))
-		return PTR_ERR(pp->phy_base);
-
-	purple_base = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	if (!purple_base) {
-		dev_err(&pdev->dev, "couldn't get purple base resource\n");
-		return -EINVAL;
-	}
-	pp->purple_base = devm_ioremap_resource(&pdev->dev, purple_base);
-	if (IS_ERR(pp->purple_base))
-		return PTR_ERR(pp->purple_base);
-
-	pp->irq = platform_get_irq(pdev, 1);
-	if (!pp->irq) {
-		dev_err(&pdev->dev, "failed to get irq\n");
-		return -ENODEV;
-	}
-	ret = devm_request_irq(&pdev->dev, pp->irq, exynos_pcie_irq_handler,
-				IRQF_SHARED, "exynos-pcie", pp);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to request irq\n");
-		return ret;
-	}
-
-	pp->dbi_base = devm_ioremap(&pdev->dev, pp->cfg.start,
-				resource_size(&pp->cfg));
-	if (!pp->dbi_base) {
-		dev_err(&pdev->dev, "error with ioremap\n");
-		return -ENOMEM;
-	}
-
-	pp->root_bus_nr = -1;
-
-	spin_lock_init(&pp->conf_lock);
-	exynos_pcie_host_init(pp);
-	pp->va_cfg0_base = devm_ioremap(&pdev->dev, pp->cfg0_base,
-					pp->config.cfg0_size);
-	if (!pp->va_cfg0_base) {
-		dev_err(pp->dev, "error with ioremap in function\n");
-		return -ENOMEM;
-	}
-	pp->va_cfg1_base = devm_ioremap(&pdev->dev, pp->cfg1_base,
-					pp->config.cfg1_size);
-	if (!pp->va_cfg1_base) {
-		dev_err(pp->dev, "error with ioremap\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static int __init exynos_pcie_probe(struct platform_device *pdev)
-{
-	struct pcie_port *pp;
-	struct device_node *np = pdev->dev.of_node;
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
-	int ret;
-
-	pp = devm_kzalloc(&pdev->dev, sizeof(*pp), GFP_KERNEL);
-	if (!pp) {
-		dev_err(&pdev->dev, "no memory for pcie port\n");
-		return -ENOMEM;
-	}
-
-	pp->dev = &pdev->dev;
-
-	if (of_pci_range_parser_init(&parser, np)) {
-		dev_err(&pdev->dev, "missing ranges property\n");
-		return -EINVAL;
-	}
-
-	/* Get the I/O and memory ranges from DT */
-	for_each_of_pci_range(&parser, &range) {
-		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
-		if (restype == IORESOURCE_IO) {
-			of_pci_range_to_resource(&range, np, &pp->io);
-			pp->io.name = "I/O";
-			pp->io.start = max_t(resource_size_t,
-					     PCIBIOS_MIN_IO,
-					     range.pci_addr + global_io_offset);
-			pp->io.end = min_t(resource_size_t,
-					   IO_SPACE_LIMIT,
-					   range.pci_addr + range.size
-					   + global_io_offset);
-			pp->config.io_size = resource_size(&pp->io);
-			pp->config.io_bus_addr = range.pci_addr;
-		}
-		if (restype == IORESOURCE_MEM) {
-			of_pci_range_to_resource(&range, np, &pp->mem);
-			pp->mem.name = "MEM";
-			pp->config.mem_size = resource_size(&pp->mem);
-			pp->config.mem_bus_addr = range.pci_addr;
-		}
-		if (restype == 0) {
-			of_pci_range_to_resource(&range, np, &pp->cfg);
-			pp->config.cfg0_size = resource_size(&pp->cfg)/2;
-			pp->config.cfg1_size = resource_size(&pp->cfg)/2;
-		}
-	}
-
-	pp->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
-
-	pp->clk = devm_clk_get(&pdev->dev, "pcie");
-	if (IS_ERR(pp->clk)) {
-		dev_err(&pdev->dev, "Failed to get pcie rc clock\n");
-		return PTR_ERR(pp->clk);
-	}
-	ret = clk_prepare_enable(pp->clk);
-	if (ret)
-		return ret;
-
-	pp->bus_clk = devm_clk_get(&pdev->dev, "pcie_bus");
-	if (IS_ERR(pp->bus_clk)) {
-		dev_err(&pdev->dev, "Failed to get pcie bus clock\n");
-		ret = PTR_ERR(pp->bus_clk);
-		goto fail_clk;
-	}
-	ret = clk_prepare_enable(pp->bus_clk);
-	if (ret)
-		goto fail_clk;
-
-	ret = add_pcie_port(pp, pdev);
-	if (ret < 0)
-		goto fail_bus_clk;
-
-	pp->controller = exynos_pci.nr_controllers;
-	exynos_pci.nr_controllers = 1;
-	exynos_pci.private_data = (void **)&pp;
-
-	pci_common_init(&exynos_pci);
-	pci_assign_unassigned_resources();
-#ifdef CONFIG_PCI_DOMAINS
-	exynos_pci.domain++;
-#endif
-
-	platform_set_drvdata(pdev, pp);
-	return 0;
-
-fail_bus_clk:
-	clk_disable_unprepare(pp->bus_clk);
-fail_clk:
-	clk_disable_unprepare(pp->clk);
-	return ret;
-}
-
-static int __exit exynos_pcie_remove(struct platform_device *pdev)
-{
-	struct pcie_port *pp = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(pp->bus_clk);
-	clk_disable_unprepare(pp->clk);
-
-	return 0;
-}
-
-static const struct of_device_id exynos_pcie_of_match[] = {
-	{ .compatible = "samsung,exynos5440-pcie", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, exynos_pcie_of_match);
-
-static struct platform_driver exynos_pcie_driver = {
-	.remove		= __exit_p(exynos_pcie_remove),
-	.driver = {
-		.name	= "exynos-pcie",
-		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(exynos_pcie_of_match),
-	},
-};
-
-static int exynos_pcie_abort(unsigned long addr, unsigned int fsr,
-			struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-	unsigned long instr = *(unsigned long *)pc;
-
-	WARN_ONCE(1, "pcie abort\n");
-
-	/*
-	 * If the instruction being executed was a read,
-	 * make it look like it read all-ones.
-	 */
-	if ((instr & 0x0c100000) == 0x04100000) {
-		int reg = (instr >> 12) & 15;
-		unsigned long val;
-
-		if (instr & 0x00400000)
-			val = 255;
-		else
-			val = -1;
-
-		regs->uregs[reg] = val;
-		regs->ARM_pc += 4;
-		return 0;
-	}
-
-	if ((instr & 0x0e100090) == 0x00100090) {
-		int reg = (instr >> 12) & 15;
-
-		regs->uregs[reg] = -1;
-		regs->ARM_pc += 4;
-		return 0;
-	}
-
-	return 1;
-}
-
-/* Exynos PCIe driver does not allow module unload */
-
-static int __init pcie_init(void)
-{
-	hook_fault_code(16 + 6, exynos_pcie_abort, SIGBUS, 0,
-			"imprecise external abort");
-
-	platform_driver_probe(&exynos_pcie_driver, exynos_pcie_probe);
-
-	return 0;
+	dw_pcie_writel_rc(pp, val, dbi_base + PCI_COMMAND);
 }
-subsys_initcall(pcie_init);
 
 MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
-MODULE_DESCRIPTION("Samsung PCIe host controller driver");
+MODULE_DESCRIPTION("Designware PCIe host controller driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
new file mode 100644
index 0000000..75b9d65
--- /dev/null
+++ b/drivers/pci/host/pcie-designware.h
@@ -0,0 +1,72 @@ 
+/*
+ * Synopsys Designware PCIe host controller driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct pcie_port_info {
+	u32		cfg0_size;
+	u32		cfg1_size;
+	u32		io_size;
+	u32		mem_size;
+	phys_addr_t	io_bus_addr;
+	phys_addr_t	mem_bus_addr;
+};
+
+struct pcie_port {
+	struct device		*dev;
+	u8			controller;
+	u8			root_bus_nr;
+	void __iomem		*dbi_base;
+	void __iomem		*elbi_base;
+	void __iomem		*phy_base;
+	void __iomem		*purple_base;
+	u64			cfg0_base;
+	void __iomem		*va_cfg0_base;
+	u64			cfg1_base;
+	void __iomem		*va_cfg1_base;
+	u64			io_base;
+	u64			mem_base;
+	spinlock_t		conf_lock;
+	struct resource		cfg;
+	struct resource		io;
+	struct resource		mem;
+	struct pcie_port_info	config;
+	struct clk		*clk;
+	struct clk		*bus_clk;
+	int			irq;
+	int			reset_gpio;
+
+	struct dw_pcie_host_ops	*ops;
+};
+
+struct dw_pcie_host_ops {
+	void (*readl_rc)(struct pcie_port *pp, void *dbi_base, u32 *val);
+	void (*writel_rc)(struct pcie_port *pp, u32 val, void *dbi_base);
+	int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
+	int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val);
+	int (*link_up)(struct pcie_port *pp);
+	void (*host_init)(struct pcie_port *pp);
+};
+
+extern struct hw_pci dw_pci;
+
+extern unsigned long global_io_offset;
+
+int cfg_read(void *addr, int where, int size, u32 *val);
+int cfg_write(void *addr, int where, int size, u32 val);
+int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, u32 val);
+int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val);
+int dw_pcie_link_up(struct pcie_port *pp);
+void dw_pcie_setup_rc(struct pcie_port *pp);
+void dw_pcie_host_init(struct pcie_port *pp);
+int dw_pcie_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys);
+int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
diff --git a/drivers/pci/host/pcie-exynos.c b/drivers/pci/host/pcie-exynos.c
new file mode 100644
index 0000000..c7224930
--- /dev/null
+++ b/drivers/pci/host/pcie-exynos.c
@@ -0,0 +1,619 @@ 
+/*
+ * PCIe host controller driver for Samsung EXYNOS SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+/* PCIe ELBI registers */
+#define PCIE_IRQ_PULSE			0x000
+#define IRQ_INTA_ASSERT			(0x1 << 0)
+#define IRQ_INTB_ASSERT			(0x1 << 2)
+#define IRQ_INTC_ASSERT			(0x1 << 4)
+#define IRQ_INTD_ASSERT			(0x1 << 6)
+#define PCIE_IRQ_LEVEL			0x004
+#define PCIE_IRQ_SPECIAL		0x008
+#define PCIE_IRQ_EN_PULSE		0x00c
+#define PCIE_IRQ_EN_LEVEL		0x010
+#define PCIE_IRQ_EN_SPECIAL		0x014
+#define PCIE_PWR_RESET			0x018
+#define PCIE_CORE_RESET			0x01c
+#define PCIE_CORE_RESET_ENABLE		(0x1 << 0)
+#define PCIE_STICKY_RESET		0x020
+#define PCIE_NONSTICKY_RESET		0x024
+#define PCIE_APP_INIT_RESET		0x028
+#define PCIE_APP_LTSSM_ENABLE		0x02c
+#define PCIE_ELBI_RDLH_LINKUP		0x064
+#define PCIE_ELBI_LTSSM_ENABLE		0x1
+#define PCIE_ELBI_SLV_AWMISC		0x11c
+#define PCIE_ELBI_SLV_ARMISC		0x120
+#define PCIE_ELBI_SLV_DBI_ENABLE	(0x1 << 21)
+
+/* PCIe Purple registers */
+#define PCIE_PHY_GLOBAL_RESET		0x000
+#define PCIE_PHY_COMMON_RESET		0x004
+#define PCIE_PHY_CMN_REG		0x008
+#define PCIE_PHY_MAC_RESET		0x00c
+#define PCIE_PHY_PLL_LOCKED		0x010
+#define PCIE_PHY_TRSVREG_RESET		0x020
+#define PCIE_PHY_TRSV_RESET		0x024
+
+/* PCIe PHY registers */
+#define PCIE_PHY_IMPEDANCE		0x004
+#define PCIE_PHY_PLL_DIV_0		0x008
+#define PCIE_PHY_PLL_BIAS		0x00c
+#define PCIE_PHY_DCC_FEEDBACK		0x014
+#define PCIE_PHY_PLL_DIV_1		0x05c
+#define PCIE_PHY_TRSV0_EMP_LVL		0x084
+#define PCIE_PHY_TRSV0_DRV_LVL		0x088
+#define PCIE_PHY_TRSV0_RXCDR		0x0ac
+#define PCIE_PHY_TRSV0_LVCC		0x0dc
+#define PCIE_PHY_TRSV1_EMP_LVL		0x144
+#define PCIE_PHY_TRSV1_RXCDR		0x16c
+#define PCIE_PHY_TRSV1_LVCC		0x19c
+#define PCIE_PHY_TRSV2_EMP_LVL		0x204
+#define PCIE_PHY_TRSV2_RXCDR		0x22c
+#define PCIE_PHY_TRSV2_LVCC		0x25c
+#define PCIE_PHY_TRSV3_EMP_LVL		0x2c4
+#define PCIE_PHY_TRSV3_RXCDR		0x2ec
+#define PCIE_PHY_TRSV3_LVCC		0x31c
+
+static void exynos_pcie_sideband_dbi_w_mode(struct pcie_port *pp, bool on)
+{
+	u32 val;
+
+	if (on) {
+		val = readl(pp->elbi_base + PCIE_ELBI_SLV_AWMISC);
+		val |= PCIE_ELBI_SLV_DBI_ENABLE;
+		writel(val, pp->elbi_base + PCIE_ELBI_SLV_AWMISC);
+	} else {
+		val = readl(pp->elbi_base + PCIE_ELBI_SLV_AWMISC);
+		val &= ~PCIE_ELBI_SLV_DBI_ENABLE;
+		writel(val, pp->elbi_base + PCIE_ELBI_SLV_AWMISC);
+	}
+}
+
+static void exynos_pcie_sideband_dbi_r_mode(struct pcie_port *pp, bool on)
+{
+	u32 val;
+
+	if (on) {
+		val = readl(pp->elbi_base + PCIE_ELBI_SLV_ARMISC);
+		val |= PCIE_ELBI_SLV_DBI_ENABLE;
+		writel(val, pp->elbi_base + PCIE_ELBI_SLV_ARMISC);
+	} else {
+		val = readl(pp->elbi_base + PCIE_ELBI_SLV_ARMISC);
+		val &= ~PCIE_ELBI_SLV_DBI_ENABLE;
+		writel(val, pp->elbi_base + PCIE_ELBI_SLV_ARMISC);
+	}
+}
+
+static void exynos_pcie_assert_core_reset(struct pcie_port *pp)
+{
+	u32 val;
+	void __iomem *elbi_base = pp->elbi_base;
+
+	val = readl(elbi_base + PCIE_CORE_RESET);
+	val &= ~PCIE_CORE_RESET_ENABLE;
+	writel(val, elbi_base + PCIE_CORE_RESET);
+	writel(0, elbi_base + PCIE_PWR_RESET);
+	writel(0, elbi_base + PCIE_STICKY_RESET);
+	writel(0, elbi_base + PCIE_NONSTICKY_RESET);
+}
+
+static void exynos_pcie_deassert_core_reset(struct pcie_port *pp)
+{
+	u32 val;
+	void __iomem *elbi_base = pp->elbi_base;
+	void __iomem *purple_base = pp->purple_base;
+
+	val = readl(elbi_base + PCIE_CORE_RESET);
+	val |= PCIE_CORE_RESET_ENABLE;
+	writel(val, elbi_base + PCIE_CORE_RESET);
+	writel(1, elbi_base + PCIE_STICKY_RESET);
+	writel(1, elbi_base + PCIE_NONSTICKY_RESET);
+	writel(1, elbi_base + PCIE_APP_INIT_RESET);
+	writel(0, elbi_base + PCIE_APP_INIT_RESET);
+	writel(1, purple_base + PCIE_PHY_MAC_RESET);
+}
+
+static void exynos_pcie_assert_phy_reset(struct pcie_port *pp)
+{
+	void __iomem *purple_base = pp->purple_base;
+
+	writel(0, purple_base + PCIE_PHY_MAC_RESET);
+	writel(1, purple_base + PCIE_PHY_GLOBAL_RESET);
+}
+
+static void exynos_pcie_deassert_phy_reset(struct pcie_port *pp)
+{
+	void __iomem *elbi_base = pp->elbi_base;
+	void __iomem *purple_base = pp->purple_base;
+
+	writel(0, purple_base + PCIE_PHY_GLOBAL_RESET);
+	writel(1, elbi_base + PCIE_PWR_RESET);
+	writel(0, purple_base + PCIE_PHY_COMMON_RESET);
+	writel(0, purple_base + PCIE_PHY_CMN_REG);
+	writel(0, purple_base + PCIE_PHY_TRSVREG_RESET);
+	writel(0, purple_base + PCIE_PHY_TRSV_RESET);
+}
+
+static void exynos_pcie_init_phy(struct pcie_port *pp)
+{
+	void __iomem *phy_base = pp->phy_base;
+
+	/* DCC feedback control off */
+	writel(0x29, phy_base + PCIE_PHY_DCC_FEEDBACK);
+
+	/* set TX/RX impedance */
+	writel(0xd5, phy_base + PCIE_PHY_IMPEDANCE);
+
+	/* set 50Mhz PHY clock */
+	writel(0x14, phy_base + PCIE_PHY_PLL_DIV_0);
+	writel(0x12, phy_base + PCIE_PHY_PLL_DIV_1);
+
+	/* set TX Differential output for lane 0 */
+	writel(0x7f, phy_base + PCIE_PHY_TRSV0_DRV_LVL);
+
+	/* set TX Pre-emphasis Level Control for lane 0 to minimum */
+	writel(0x0, phy_base + PCIE_PHY_TRSV0_EMP_LVL);
+
+	/* set RX clock and data recovery bandwidth */
+	writel(0xe7, phy_base + PCIE_PHY_PLL_BIAS);
+	writel(0x82, phy_base + PCIE_PHY_TRSV0_RXCDR);
+	writel(0x82, phy_base + PCIE_PHY_TRSV1_RXCDR);
+	writel(0x82, phy_base + PCIE_PHY_TRSV2_RXCDR);
+	writel(0x82, phy_base + PCIE_PHY_TRSV3_RXCDR);
+
+	/* change TX Pre-emphasis Level Control for lanes */
+	writel(0x39, phy_base + PCIE_PHY_TRSV0_EMP_LVL);
+	writel(0x39, phy_base + PCIE_PHY_TRSV1_EMP_LVL);
+	writel(0x39, phy_base + PCIE_PHY_TRSV2_EMP_LVL);
+	writel(0x39, phy_base + PCIE_PHY_TRSV3_EMP_LVL);
+
+	/* set LVCC */
+	writel(0x20, phy_base + PCIE_PHY_TRSV0_LVCC);
+	writel(0xa0, phy_base + PCIE_PHY_TRSV1_LVCC);
+	writel(0xa0, phy_base + PCIE_PHY_TRSV2_LVCC);
+	writel(0xa0, phy_base + PCIE_PHY_TRSV3_LVCC);
+}
+
+static void exynos_pcie_assert_reset(struct pcie_port *pp)
+{
+	if (pp->reset_gpio >= 0)
+		devm_gpio_request_one(pp->dev, pp->reset_gpio,
+				GPIOF_OUT_INIT_HIGH, "RESET");
+	return;
+}
+
+static int exynos_pcie_establish_link(struct pcie_port *pp)
+{
+	u32 val;
+	int count = 0;
+	void __iomem *elbi_base = pp->elbi_base;
+	void __iomem *purple_base = pp->purple_base;
+	void __iomem *phy_base = pp->phy_base;
+
+	if (dw_pcie_link_up(pp)) {
+		dev_err(pp->dev, "Link already up\n");
+		return 0;
+	}
+
+	/* assert reset signals */
+	exynos_pcie_assert_core_reset(pp);
+	exynos_pcie_assert_phy_reset(pp);
+
+	/* de-assert phy reset */
+	exynos_pcie_deassert_phy_reset(pp);
+
+	/* initialize phy */
+	exynos_pcie_init_phy(pp);
+
+	/* pulse for common reset */
+	writel(1, purple_base + PCIE_PHY_COMMON_RESET);
+	udelay(500);
+	writel(0, purple_base + PCIE_PHY_COMMON_RESET);
+
+	/* de-assert core reset */
+	exynos_pcie_deassert_core_reset(pp);
+
+	/* setup root complex */
+	dw_pcie_setup_rc(pp);
+
+	/* assert reset signal */
+	exynos_pcie_assert_reset(pp);
+
+	/* assert LTSSM enable */
+	writel(PCIE_ELBI_LTSSM_ENABLE, elbi_base + PCIE_APP_LTSSM_ENABLE);
+
+	/* check if the link is up or not */
+	while (!dw_pcie_link_up(pp)) {
+		mdelay(100);
+		count++;
+		if (count == 10) {
+			while (readl(phy_base + PCIE_PHY_PLL_LOCKED) == 0) {
+				val = readl(purple_base + PCIE_PHY_PLL_LOCKED);
+				dev_info(pp->dev, "PLL Locked: 0x%x\n", val);
+			}
+			dev_err(pp->dev, "PCIe Link Fail\n");
+			return -EINVAL;
+		}
+	}
+
+	dev_info(pp->dev, "Link up\n");
+
+	return 0;
+}
+
+static void exynos_pcie_clear_irq_pulse(struct pcie_port *pp)
+{
+	u32 val;
+	void __iomem *elbi_base = pp->elbi_base;
+
+	val = readl(elbi_base + PCIE_IRQ_PULSE);
+	writel(val, elbi_base + PCIE_IRQ_PULSE);
+	return;
+}
+
+static void exynos_pcie_enable_irq_pulse(struct pcie_port *pp)
+{
+	u32 val;
+	void __iomem *elbi_base = pp->elbi_base;
+
+	/* enable INTX interrupt */
+	val = IRQ_INTA_ASSERT | IRQ_INTB_ASSERT |
+		IRQ_INTC_ASSERT | IRQ_INTD_ASSERT,
+	writel(val, elbi_base + PCIE_IRQ_EN_PULSE);
+	return;
+}
+
+static irqreturn_t exynos_pcie_irq_handler(int irq, void *arg)
+{
+	struct pcie_port *pp = arg;
+
+	exynos_pcie_clear_irq_pulse(pp);
+	return IRQ_HANDLED;
+}
+
+static void exynos_pcie_enable_interrupts(struct pcie_port *pp)
+{
+	exynos_pcie_enable_irq_pulse(pp);
+	return;
+}
+
+static inline void exynos_pcie_readl_rc(struct pcie_port *pp, void *dbi_base,
+					u32 *val)
+{
+	exynos_pcie_sideband_dbi_r_mode(pp, true);
+	*val = readl(dbi_base);
+	exynos_pcie_sideband_dbi_r_mode(pp, false);
+	return;
+}
+
+static inline void exynos_pcie_writel_rc(struct pcie_port *pp, u32 val,
+					void *dbi_base)
+{
+	exynos_pcie_sideband_dbi_w_mode(pp, true);
+	writel(val, dbi_base);
+	exynos_pcie_sideband_dbi_w_mode(pp, false);
+	return;
+}
+
+static int exynos_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
+				u32 *val)
+{
+	int ret;
+
+	exynos_pcie_sideband_dbi_r_mode(pp, true);
+	ret = cfg_read(pp->dbi_base + (where & ~0x3), where, size, val);
+	exynos_pcie_sideband_dbi_r_mode(pp, false);
+	return ret;
+}
+
+static int exynos_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
+				u32 val)
+{
+	int ret;
+
+	exynos_pcie_sideband_dbi_w_mode(pp, true);
+	ret = cfg_write(pp->dbi_base + (where & ~0x3), where, size, val);
+	exynos_pcie_sideband_dbi_w_mode(pp, false);
+	return ret;
+}
+
+static int exynos_pcie_link_up(struct pcie_port *pp)
+{
+	u32 val = readl(pp->elbi_base + PCIE_ELBI_RDLH_LINKUP);
+
+	if (val == PCIE_ELBI_LTSSM_ENABLE)
+		return 1;
+
+	return 0;
+}
+
+static void exynos_pcie_host_init(struct pcie_port *pp)
+{
+	exynos_pcie_establish_link(pp);
+	exynos_pcie_enable_interrupts(pp);
+}
+
+static struct dw_pcie_host_ops exynos_pcie_host_ops = {
+	.readl_rc = exynos_pcie_readl_rc,
+	.writel_rc = exynos_pcie_writel_rc,
+	.rd_own_conf = exynos_pcie_rd_own_conf,
+	.wr_own_conf = exynos_pcie_wr_own_conf,
+	.link_up = exynos_pcie_link_up,
+	.host_init = exynos_pcie_host_init,
+};
+
+static int add_pcie_port(struct pcie_port *pp, struct platform_device *pdev)
+{
+	struct resource *elbi_base;
+	struct resource *phy_base;
+	struct resource *purple_base;
+	int ret;
+
+	elbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!elbi_base) {
+		dev_err(&pdev->dev, "couldn't get elbi base resource\n");
+		return -EINVAL;
+	}
+	pp->elbi_base = devm_ioremap_resource(&pdev->dev, elbi_base);
+	if (IS_ERR(pp->elbi_base))
+		return PTR_ERR(pp->elbi_base);
+
+	phy_base = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!phy_base) {
+		dev_err(&pdev->dev, "couldn't get phy base resource\n");
+		return -EINVAL;
+	}
+	pp->phy_base = devm_ioremap_resource(&pdev->dev, phy_base);
+	if (IS_ERR(pp->phy_base))
+		return PTR_ERR(pp->phy_base);
+
+	purple_base = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!purple_base) {
+		dev_err(&pdev->dev, "couldn't get purple base resource\n");
+		return -EINVAL;
+	}
+	pp->purple_base = devm_ioremap_resource(&pdev->dev, purple_base);
+	if (IS_ERR(pp->purple_base))
+		return PTR_ERR(pp->purple_base);
+
+	pp->irq = platform_get_irq(pdev, 1);
+	if (!pp->irq) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		return -ENODEV;
+	}
+	ret = devm_request_irq(&pdev->dev, pp->irq, exynos_pcie_irq_handler,
+				IRQF_SHARED, "exynos-pcie", pp);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		return ret;
+	}
+
+	pp->dbi_base = devm_ioremap(&pdev->dev, pp->cfg.start,
+				resource_size(&pp->cfg));
+	if (!pp->dbi_base) {
+		dev_err(&pdev->dev, "error with ioremap\n");
+		return -ENOMEM;
+	}
+
+	pp->root_bus_nr = -1;
+	pp->ops = &exynos_pcie_host_ops;
+
+	spin_lock_init(&pp->conf_lock);
+	dw_pcie_host_init(pp);
+	pp->va_cfg0_base = devm_ioremap(&pdev->dev, pp->cfg0_base,
+					pp->config.cfg0_size);
+	if (!pp->va_cfg0_base) {
+		dev_err(pp->dev, "error with ioremap in function\n");
+		return -ENOMEM;
+	}
+	pp->va_cfg1_base = devm_ioremap(&pdev->dev, pp->cfg1_base,
+					pp->config.cfg1_size);
+	if (!pp->va_cfg1_base) {
+		dev_err(pp->dev, "error with ioremap\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int __init exynos_pcie_probe(struct platform_device *pdev)
+{
+	struct pcie_port *pp;
+	struct device_node *np = pdev->dev.of_node;
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
+	int ret;
+
+	pp = devm_kzalloc(&pdev->dev, sizeof(*pp), GFP_KERNEL);
+	if (!pp) {
+		dev_err(&pdev->dev, "no memory for pcie port\n");
+		return -ENOMEM;
+	}
+
+	pp->dev = &pdev->dev;
+
+	if (of_pci_range_parser_init(&parser, np)) {
+		dev_err(&pdev->dev, "missing ranges property\n");
+		return -EINVAL;
+	}
+
+	/* Get the I/O and memory ranges from DT */
+	for_each_of_pci_range(&parser, &range) {
+		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
+		if (restype == IORESOURCE_IO) {
+			of_pci_range_to_resource(&range, np, &pp->io);
+			pp->io.name = "I/O";
+			pp->io.start = max_t(resource_size_t,
+					     PCIBIOS_MIN_IO,
+					     range.pci_addr + global_io_offset);
+			pp->io.end = min_t(resource_size_t,
+					   IO_SPACE_LIMIT,
+					   range.pci_addr + range.size
+					   + global_io_offset);
+			pp->config.io_size = resource_size(&pp->io);
+			pp->config.io_bus_addr = range.pci_addr;
+		}
+		if (restype == IORESOURCE_MEM) {
+			of_pci_range_to_resource(&range, np, &pp->mem);
+			pp->mem.name = "MEM";
+			pp->config.mem_size = resource_size(&pp->mem);
+			pp->config.mem_bus_addr = range.pci_addr;
+		}
+		if (restype == 0) {
+			of_pci_range_to_resource(&range, np, &pp->cfg);
+			pp->config.cfg0_size = resource_size(&pp->cfg)/2;
+			pp->config.cfg1_size = resource_size(&pp->cfg)/2;
+		}
+	}
+
+	pp->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
+
+	pp->clk = devm_clk_get(&pdev->dev, "pcie");
+	if (IS_ERR(pp->clk)) {
+		dev_err(&pdev->dev, "Failed to get pcie rc clock\n");
+		return PTR_ERR(pp->clk);
+	}
+	ret = clk_prepare_enable(pp->clk);
+	if (ret)
+		return ret;
+
+	pp->bus_clk = devm_clk_get(&pdev->dev, "pcie_bus");
+	if (IS_ERR(pp->bus_clk)) {
+		dev_err(&pdev->dev, "Failed to get pcie bus clock\n");
+		ret = PTR_ERR(pp->bus_clk);
+		goto fail_clk;
+	}
+	ret = clk_prepare_enable(pp->bus_clk);
+	if (ret)
+		goto fail_clk;
+
+	ret = add_pcie_port(pp, pdev);
+	if (ret < 0)
+		goto fail_bus_clk;
+
+	pp->controller = dw_pci.nr_controllers;
+	dw_pci.nr_controllers = 1;
+	dw_pci.private_data = (void **)&pp;
+
+	pci_common_init(&dw_pci);
+	pci_assign_unassigned_resources();
+#ifdef CONFIG_PCI_DOMAINS
+	dw_pci.domain++;
+#endif
+
+	platform_set_drvdata(pdev, pp);
+	return 0;
+
+fail_bus_clk:
+	clk_disable_unprepare(pp->bus_clk);
+fail_clk:
+	clk_disable_unprepare(pp->clk);
+	return ret;
+}
+
+static int __exit exynos_pcie_remove(struct platform_device *pdev)
+{
+	struct pcie_port *pp = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(pp->bus_clk);
+	clk_disable_unprepare(pp->clk);
+
+	return 0;
+}
+
+static const struct of_device_id exynos_pcie_of_match[] = {
+	{ .compatible = "samsung,exynos5440-pcie", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_pcie_of_match);
+
+static struct platform_driver exynos_pcie_driver = {
+	.remove		= __exit_p(exynos_pcie_remove),
+	.driver = {
+		.name	= "exynos-pcie",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(exynos_pcie_of_match),
+	},
+};
+
+static int exynos_pcie_abort(unsigned long addr, unsigned int fsr,
+			struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+	unsigned long instr = *(unsigned long *)pc;
+
+	WARN_ONCE(1, "pcie abort\n");
+
+	/*
+	 * If the instruction being executed was a read,
+	 * make it look like it read all-ones.
+	 */
+	if ((instr & 0x0c100000) == 0x04100000) {
+		int reg = (instr >> 12) & 15;
+		unsigned long val;
+
+		if (instr & 0x00400000)
+			val = 255;
+		else
+			val = -1;
+
+		regs->uregs[reg] = val;
+		regs->ARM_pc += 4;
+		return 0;
+	}
+
+	if ((instr & 0x0e100090) == 0x00100090) {
+		int reg = (instr >> 12) & 15;
+
+		regs->uregs[reg] = -1;
+		regs->ARM_pc += 4;
+		return 0;
+	}
+
+	return 1;
+}
+
+/* Exynos PCIe driver does not allow module unload */
+
+static int __init pcie_init(void)
+{
+	hook_fault_code(16 + 6, exynos_pcie_abort, SIGBUS, 0,
+			"imprecise external abort");
+
+	platform_driver_probe(&exynos_pcie_driver, exynos_pcie_probe);
+
+	return 0;
+}
+subsys_initcall(pcie_init);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Samsung PCIe host controller driver");
+MODULE_LICENSE("GPL v2");