diff mbox

net: sxgbe: Added condition for non fix_burst mode

Message ID 008c01cf69cc$4dcc8e50$e965aaf0$%an@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Byungho An May 7, 2014, 8:14 a.m. UTC
This patch adds the condition for non fixed burst mode
and separates into two conditions depending on pbl value.

Signed-off-by: Byungho An <bh74.an@samsung.com>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c  |   32 ++++++++++++++++++++---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h  |    2 +-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c |    3 ++-
 3 files changed, 32 insertions(+), 5 deletions(-)

Comments

David Miller May 7, 2014, 5:06 p.m. UTC | #1
Please start numbering your patches and submit patch sets properly.

You need to provide:

1) A header posting with subject "[PATCH 0/${N}] blah blah blah"
   that describes at a high level what the patch series does.

2) The patches, in the correct order, numbered in the subject
   line in the format "[PATCH X/${N}] ..."

Otherwise I have no idea what order the patches are supposed
to be applied, whether the patches depend upon eachother, and
if so in what way.

I'm not applying these sxgbe patches until you start posting
them properly, thank you.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Byungho An May 8, 2014, 1:19 a.m. UTC | #2
David Miller wrote:
> Please start numbering your patches and submit patch sets properly.
> 
> You need to provide:
> 
> 1) A header posting with subject "[PATCH 0/${N}] blah blah blah"
>    that describes at a high level what the patch series does.
> 
> 2) The patches, in the correct order, numbered in the subject
>    line in the format "[PATCH X/${N}] ..."
> 
> Otherwise I have no idea what order the patches are supposed
> to be applied, whether the patches depend upon eachother, and
> if so in what way.
> 
> I'm not applying these sxgbe patches until you start posting
> them properly, thank you.

Ok, I'll repost patches

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
index bb9b5b8..49240c9 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
@@ -45,7 +45,8 @@  static int sxgbe_dma_init(void __iomem *ioaddr, int fix_burst, int burst_map)
 
 static void sxgbe_dma_channel_init(void __iomem *ioaddr, int cha_num,
 				   int fix_burst, int pbl, dma_addr_t dma_tx,
-				   dma_addr_t dma_rx, int t_rsize, int r_rsize)
+				   dma_addr_t dma_rx, int t_rsize, int r_rsize,
+				   int buf_size)
 {
 	u32 reg_val;
 	dma_addr_t dma_addr;
@@ -57,12 +58,37 @@  static void sxgbe_dma_channel_init(void __iomem *ioaddr, int cha_num,
 		writel(reg_val, ioaddr + SXGBE_DMA_CHA_CTL_REG(cha_num));
 		/* program the TX pbl */
 		reg_val = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
-		reg_val |= (pbl << SXGBE_DMA_TXPBL_LSHIFT);
+		reg_val |= pbl << SXGBE_DMA_TXPBL_LSHIFT;
 		writel(reg_val, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
 		/* program the RX pbl */
 		reg_val = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
-		reg_val |= (pbl << SXGBE_DMA_RXPBL_LSHIFT);
+		reg_val |= pbl << SXGBE_DMA_RXPBL_LSHIFT;
 		writel(reg_val, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+	} else {
+		if (pbl > 32) {
+			/* program the pblx8  */
+			reg_val |= SXGBE_DMA_PBL_X8MODE;
+			writel(reg_val, ioaddr + SXGBE_DMA_CHA_CTL_REG(cha_num));
+			/* program the TX pbl */
+			reg_val = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+			reg_val |= (pbl >> 3) << SXGBE_DMA_TXPBL_LSHIFT;
+			writel(reg_val, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+			/* program the RX pbl */
+			reg_val = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+			reg_val |= (pbl >> 3) << SXGBE_DMA_RXPBL_LSHIFT |
+				   buf_size << SXGBE_DMA_BLENMAP_LSHIFT;
+			writel(reg_val, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+		} else {
+			/* program the TX pbl */
+			reg_val = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+			reg_val |= pbl << SXGBE_DMA_TXPBL_LSHIFT;
+			writel(reg_val, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+			/* program the RX pbl */
+			reg_val = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+			reg_val |= pbl << SXGBE_DMA_RXPBL_LSHIFT |
+				   buf_size << SXGBE_DMA_BLENMAP_LSHIFT;
+			writel(reg_val, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+		}
 	}
 
 	/* program desc registers */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
index 1607b54..843fa9b 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
@@ -25,7 +25,7 @@  struct sxgbe_dma_ops {
 	int (*init)(void __iomem *ioaddr, int fix_burst, int burst_map);
 	void (*cha_init)(void __iomem *ioaddr, int cha_num, int fix_burst,
 			 int pbl, dma_addr_t dma_tx, dma_addr_t dma_rx,
-			 int t_rzie, int r_rsize);
+			 int t_rzie, int r_rsize, int buf_size);
 	void (*enable_dma_transmission)(void __iomem *ioaddr, int dma_cnum);
 	void (*enable_dma_irq)(void __iomem *ioaddr, int dma_cnum);
 	void (*disable_dma_irq)(void __iomem *ioaddr, int dma_cnum);
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index 82a9a98..93bf151 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -944,7 +944,8 @@  static int sxgbe_init_dma_engine(struct sxgbe_priv_data *priv)
 					fixed_burst, pbl,
 					(priv->txq[queue_num])->dma_tx_phy,
 					(priv->rxq[queue_num])->dma_rx_phy,
-					priv->dma_tx_size, priv->dma_rx_size);
+					priv->dma_tx_size, priv->dma_rx_size,
+					priv->dma_buf_sz);
 
 	return priv->hw->dma->init(priv->ioaddr, fixed_burst, burst_map);
 }