| Message ID | 1360214129-4096-2-git-send-email-tushar.behera@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Feb 07, 2013 at 10:45:26, Tushar Behera wrote: > From: Amit Daniel Kachhap <amit.daniel@samsung.com> > > Added S5M8767 PMIC DT nodes to Arndale board. > > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > --- > arch/arm/boot/dts/exynos5250-arndale.dts | 213 +++++++++++++++++++++++++++++- > 1 files changed, 212 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts > index 9ce40df..b40a02f 100644 > --- a/arch/arm/boot/dts/exynos5250-arndale.dts > +++ b/arch/arm/boot/dts/exynos5250-arndale.dts > @@ -25,7 +25,218 @@ > }; > > i2c@12C60000 { > - status = "disabled"; > + status = "okay"; Is there any need to change status "okay" here as in dtsi file it is by default okay ? > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-max-bus-freq = <20000>; > + samsung,i2c-slave-addr = <0x66>; > + gpios = <&gpb3 0 2 3 0>, > + <&gpb3 1 2 3 0>; > + > + s5m8767_pmic@66 { > + compatible = "samsung,s5m8767-pmic"; > + reg = <0x66>; > + > + s5m8767,pmic-buck2-dvs-voltage = <1300000>; > + s5m8767,pmic-buck3-dvs-voltage = <1100000>; > + s5m8767,pmic-buck4-dvs-voltage = <1200000>; > + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 1 0 0>, > + <&gpd1 1 1 0 0>, > + <&gpd1 2 1 0 0>; > + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, > + <&gpx2 4 1 0 0>, > + <&gpx2 5 1 0 0>; > + regulators { > + ldo1_reg: LDO1 { > + regulator-name = "VDD_ALIVE_1.0V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + regulator-boot-on; > + op_mode = <1>; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "VDD_28IO_DP_1.35V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "VDD_COMMON1_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "VDD_IOPERI_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "VDD_EXT_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "VDD_MPLL_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "VDD_XPLL_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "VDD_COMMON2_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "VDD_33ON_3.0V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "VDD_COMMON3_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "VDD_ABB2_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo12_reg: LDO12 { > + regulator-name = "VDD_USB_3.0V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo13_reg: LDO13 { > + regulator-name = "VDDQ_C2C_W_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "VDD18_ABB0_3_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo15_reg: LDO15 { > + regulator-name = "VDD10_COMMON4_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo16_reg: LDO16 { > + regulator-name = "VDD18_HSIC_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo17_reg: LDO17 { > + regulator-name = "VDDQ_MMC2_3_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + ldo18_reg: LDO18 { > + regulator-name = "VDD_33ON_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "VDD_MIF_1.2V"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + op_mode = <1>; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "vdd_arm"; > + regulator-min-microvolt = <925000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-boot-on; > + op_mode = <1>; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "VDD_INT_1.0V"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + op_mode = <1>; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "VDD_G3D_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + op_mode = <1>; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "VDD_MEM_1.35V"; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1355000>; > + regulator-always-on; > + regulator-boot-on; > + op_mode = <1>; > + }; > + > + }; > + }; > }; > > i2c@12C70000 { > -- > 1.7.4.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/07/2013 11:19 AM, Kumar, Anil wrote: > On Thu, Feb 07, 2013 at 10:45:26, Tushar Behera wrote: >> From: Amit Daniel Kachhap <amit.daniel@samsung.com> >> >> Added S5M8767 PMIC DT nodes to Arndale board. >> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >> --- >> arch/arm/boot/dts/exynos5250-arndale.dts | 213 +++++++++++++++++++++++++++++- >> 1 files changed, 212 insertions(+), 1 deletions(-) >> >> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts >> index 9ce40df..b40a02f 100644 >> --- a/arch/arm/boot/dts/exynos5250-arndale.dts >> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts >> @@ -25,7 +25,218 @@ >> }; >> >> i2c@12C60000 { >> - status = "disabled"; >> + status = "okay"; > > Is there any need to change status "okay" here as in dtsi file it is > by default okay ? > Right, there is no need for setting it as "okay" explicitly.
The V2 of this patch is posted with comments suggested by Anil and some missing LDO's. Thanks, Amit Daniel On Wed, Feb 6, 2013 at 9:56 PM, Tushar Behera <tushar.behera@linaro.org> wrote: > On 02/07/2013 11:19 AM, Kumar, Anil wrote: >> On Thu, Feb 07, 2013 at 10:45:26, Tushar Behera wrote: >>> From: Amit Daniel Kachhap <amit.daniel@samsung.com> >>> >>> Added S5M8767 PMIC DT nodes to Arndale board. >>> >>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >>> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >>> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >>> --- >>> arch/arm/boot/dts/exynos5250-arndale.dts | 213 +++++++++++++++++++++++++++++- >>> 1 files changed, 212 insertions(+), 1 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts >>> index 9ce40df..b40a02f 100644 >>> --- a/arch/arm/boot/dts/exynos5250-arndale.dts >>> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts >>> @@ -25,7 +25,218 @@ >>> }; >>> >>> i2c@12C60000 { >>> - status = "disabled"; >>> + status = "okay"; >> >> Is there any need to change status "okay" here as in dtsi file it is >> by default okay ? >> > > Right, there is no need for setting it as "okay" explicitly. > > -- > Tushar Behera > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
amit daniel kachhap wrote: > > The V2 of this patch is posted with comments suggested by Anil and > some missing LDO's. > OK, I see. - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 9ce40df..b40a02f 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -25,7 +25,218 @@ }; i2c@12C60000 { - status = "disabled"; + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + gpios = <&gpb3 0 2 3 0>, + <&gpb3 1 2 3 0>; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck2-dvs-voltage = <1300000>; + s5m8767,pmic-buck3-dvs-voltage = <1100000>; + s5m8767,pmic-buck4-dvs-voltage = <1200000>; + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 1 0 0>, + <&gpd1 1 1 0 0>, + <&gpd1 2 1 0 0>; + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, + <&gpx2 4 1 0 0>, + <&gpx2 5 1 0 0>; + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_28IO_DP_1.35V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD_COMMON1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_IOPERI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD_MPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_XPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD_COMMON2_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD_33ON_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_COMMON3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_ABB2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_COMMON4_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDQ_MMC2_3_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo18_reg: LDO18 { + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_INT_1.0V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_G3D_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_MEM_1.35V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1355000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + }; + }; }; i2c@12C70000 {