@@ -68,14 +68,6 @@ config S3C_LOWLEVEL_UART_PORT
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
-# timer options
-
-config SAMSUNG_HRT
- bool
- select SAMSUNG_DEV_PWM
- help
- Use the High Resolution timer support
-
# clock options
config SAMSUNG_CLOCK
@@ -12,7 +12,6 @@ obj- :=
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
-obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o
obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o
obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o
deleted file mode 100644
@@ -1,394 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * samsung - Common hr-timer support (s3c and s5p)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-
-#include <asm/smp_twd.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/sched_clock.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-#include <plat/samsung-time.h>
-
-static struct clk *tin_event;
-static struct clk *tin_source;
-static struct clk *tdiv_event;
-static struct clk *tdiv_source;
-static struct clk *timerclk;
-static struct samsung_timer_source timer_source;
-static unsigned long clock_count_per_tick;
-static void samsung_timer_resume(void);
-
-static void samsung_time_stop(enum samsung_timer_mode mode)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (mode) {
- case SAMSUNG_PWM0:
- tcon &= ~S3C2410_TCON_T0START;
- break;
-
- case SAMSUNG_PWM1:
- tcon &= ~S3C2410_TCON_T1START;
- break;
-
- case SAMSUNG_PWM2:
- tcon &= ~S3C2410_TCON_T2START;
- break;
-
- case SAMSUNG_PWM3:
- tcon &= ~S3C2410_TCON_T3START;
- break;
-
- case SAMSUNG_PWM4:
- tcon &= ~S3C2410_TCON_T4START;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- tcnt--;
-
- switch (mode) {
- case SAMSUNG_PWM0:
- tcon &= ~(0x0f << 0);
- tcon |= S3C2410_TCON_T0MANUALUPD;
- break;
-
- case SAMSUNG_PWM1:
- tcon &= ~(0x0f << 8);
- tcon |= S3C2410_TCON_T1MANUALUPD;
- break;
-
- case SAMSUNG_PWM2:
- tcon &= ~(0x0f << 12);
- tcon |= S3C2410_TCON_T2MANUALUPD;
- break;
-
- case SAMSUNG_PWM3:
- tcon &= ~(0x0f << 16);
- tcon |= S3C2410_TCON_T3MANUALUPD;
- break;
-
- case SAMSUNG_PWM4:
- tcon &= ~(0x07 << 20);
- tcon |= S3C2410_TCON_T4MANUALUPD;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
-
- __raw_writel(tcnt, S3C2410_TCNTB(mode));
- __raw_writel(tcnt, S3C2410_TCMPB(mode));
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (mode) {
- case SAMSUNG_PWM0:
- tcon |= S3C2410_TCON_T0START;
- tcon &= ~S3C2410_TCON_T0MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T0RELOAD;
- else
- tcon &= ~S3C2410_TCON_T0RELOAD;
- break;
-
- case SAMSUNG_PWM1:
- tcon |= S3C2410_TCON_T1START;
- tcon &= ~S3C2410_TCON_T1MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T1RELOAD;
- else
- tcon &= ~S3C2410_TCON_T1RELOAD;
- break;
-
- case SAMSUNG_PWM2:
- tcon |= S3C2410_TCON_T2START;
- tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T2RELOAD;
- else
- tcon &= ~S3C2410_TCON_T2RELOAD;
- break;
-
- case SAMSUNG_PWM3:
- tcon |= S3C2410_TCON_T3START;
- tcon &= ~S3C2410_TCON_T3MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T3RELOAD;
- else
- tcon &= ~S3C2410_TCON_T3RELOAD;
- break;
-
- case SAMSUNG_PWM4:
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T4RELOAD;
- else
- tcon &= ~S3C2410_TCON_T4RELOAD;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static int samsung_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- samsung_time_setup(timer_source.event_id, cycles);
- samsung_time_start(timer_source.event_id, NON_PERIODIC);
-
- return 0;
-}
-
-static void samsung_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- samsung_time_stop(timer_source.event_id);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- samsung_time_setup(timer_source.event_id, clock_count_per_tick);
- samsung_time_start(timer_source.event_id, PERIODIC);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- break;
-
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- break;
-
- case CLOCK_EVT_MODE_RESUME:
- samsung_timer_resume();
- break;
- }
-}
-
-static void samsung_timer_resume(void)
-{
- /* event timer restart */
- samsung_time_setup(timer_source.event_id, clock_count_per_tick);
- samsung_time_start(timer_source.event_id, PERIODIC);
-
- /* source timer restart */
- samsung_time_setup(timer_source.source_id, TCNT_MAX);
- samsung_time_start(timer_source.source_id, PERIODIC);
-}
-
-void __init samsung_set_timer_source(enum samsung_timer_mode event,
- enum samsung_timer_mode source)
-{
- s3c_device_timer[event].dev.bus = &platform_bus_type;
- s3c_device_timer[source].dev.bus = &platform_bus_type;
-
- timer_source.event_id = event;
- timer_source.source_id = source;
-}
-
-static struct clock_event_device time_event_device = {
- .name = "samsung_event_timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .set_next_event = samsung_set_next_event,
- .set_mode = samsung_set_mode,
-};
-
-static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction samsung_clock_event_irq = {
- .name = "samsung_time_irq",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = samsung_clock_event_isr,
- .dev_id = &time_event_device,
-};
-
-static void __init samsung_clockevent_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
- unsigned int irq_number;
- struct clk *tscaler;
-
- pclk = clk_get_rate(timerclk);
-
- tscaler = clk_get_parent(tdiv_event);
-
- clk_set_rate(tscaler, pclk / TSCALER_DIV);
- clk_set_rate(tdiv_event, pclk / TDIV);
- clk_set_parent(tin_event, tdiv_event);
-
- clock_rate = clk_get_rate(tin_event);
- clock_count_per_tick = clock_rate / HZ;
-
- time_event_device.cpumask = cpumask_of(0);
- clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
-
- irq_number = timer_source.event_id + IRQ_TIMER0;
- setup_irq(irq_number, &samsung_clock_event_irq);
-}
-
-static void __iomem *samsung_timer_reg(void)
-{
- unsigned long offset = 0;
-
- switch (timer_source.source_id) {
- case SAMSUNG_PWM0:
- case SAMSUNG_PWM1:
- case SAMSUNG_PWM2:
- case SAMSUNG_PWM3:
- offset = (timer_source.source_id * 0x0c) + 0x14;
- break;
-
- case SAMSUNG_PWM4:
- offset = 0x40;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
- return NULL;
- }
-
- return S3C_TIMERREG(offset);
-}
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by U300 implementation.)
- */
-static u32 notrace samsung_read_sched_clock(void)
-{
- void __iomem *reg = samsung_timer_reg();
-
- if (!reg)
- return 0;
-
- return ~__raw_readl(reg);
-}
-
-static void __init samsung_clocksource_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
-
- pclk = clk_get_rate(timerclk);
-
- clk_set_rate(tdiv_source, pclk / TDIV);
- clk_set_parent(tin_source, tdiv_source);
-
- clock_rate = clk_get_rate(tin_source);
-
- samsung_time_setup(timer_source.source_id, TCNT_MAX);
- samsung_time_start(timer_source.source_id, PERIODIC);
-
- setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
-
- if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
- clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
- panic("samsung_clocksource_timer: can't register clocksource\n");
-}
-
-static void __init samsung_timer_resources(void)
-{
-
- unsigned long event_id = timer_source.event_id;
- unsigned long source_id = timer_source.source_id;
- char devname[15];
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get timers clock for timer");
-
- clk_enable(timerclk);
-
- sprintf(devname, "s3c24xx-pwm.%lu", event_id);
- s3c_device_timer[event_id].id = event_id;
- s3c_device_timer[event_id].dev.init_name = devname;
-
- tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
- if (IS_ERR(tin_event))
- panic("failed to get pwm-tin clock for event timer");
-
- tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
- if (IS_ERR(tdiv_event))
- panic("failed to get pwm-tdiv clock for event timer");
-
- clk_enable(tin_event);
-
- sprintf(devname, "s3c24xx-pwm.%lu", source_id);
- s3c_device_timer[source_id].id = source_id;
- s3c_device_timer[source_id].dev.init_name = devname;
-
- tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
- if (IS_ERR(tin_source))
- panic("failed to get pwm-tin clock for source timer");
-
- tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
- if (IS_ERR(tdiv_source))
- panic("failed to get pwm-tdiv clock for source timer");
-
- clk_enable(tin_source);
-}
-
-void __init samsung_timer_init(void)
-{
- samsung_timer_resources();
- samsung_clockevent_init();
- samsung_clocksource_init();
-}
@@ -25,6 +25,13 @@ config DW_APB_TIMER_OF
config ARMADA_370_XP_TIMER
bool
+config SAMSUNG_HRT
+ bool
+ depends on PLAT_SAMSUNG
+ select SAMSUNG_DEV_PWM
+ help
+ Use the high resolution timer support on Samsung platforms.
+
config SUNXI_TIMER
bool
@@ -16,6 +16,7 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
+obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
new file mode 100644
@@ -0,0 +1,394 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * samsung - Common hr-timer support (s3c and s5p)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+
+#include <asm/smp_twd.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/sched_clock.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+#include <plat/samsung-time.h>
+
+static struct clk *tin_event;
+static struct clk *tin_source;
+static struct clk *tdiv_event;
+static struct clk *tdiv_source;
+static struct clk *timerclk;
+static struct samsung_timer_source timer_source;
+static unsigned long clock_count_per_tick;
+static void samsung_timer_resume(void);
+
+static void samsung_time_stop(enum samsung_timer_mode mode)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ switch (mode) {
+ case SAMSUNG_PWM0:
+ tcon &= ~S3C2410_TCON_T0START;
+ break;
+
+ case SAMSUNG_PWM1:
+ tcon &= ~S3C2410_TCON_T1START;
+ break;
+
+ case SAMSUNG_PWM2:
+ tcon &= ~S3C2410_TCON_T2START;
+ break;
+
+ case SAMSUNG_PWM3:
+ tcon &= ~S3C2410_TCON_T3START;
+ break;
+
+ case SAMSUNG_PWM4:
+ tcon &= ~S3C2410_TCON_T4START;
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Timer %d\n", mode);
+ break;
+ }
+ __raw_writel(tcon, S3C2410_TCON);
+}
+
+static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ tcnt--;
+
+ switch (mode) {
+ case SAMSUNG_PWM0:
+ tcon &= ~(0x0f << 0);
+ tcon |= S3C2410_TCON_T0MANUALUPD;
+ break;
+
+ case SAMSUNG_PWM1:
+ tcon &= ~(0x0f << 8);
+ tcon |= S3C2410_TCON_T1MANUALUPD;
+ break;
+
+ case SAMSUNG_PWM2:
+ tcon &= ~(0x0f << 12);
+ tcon |= S3C2410_TCON_T2MANUALUPD;
+ break;
+
+ case SAMSUNG_PWM3:
+ tcon &= ~(0x0f << 16);
+ tcon |= S3C2410_TCON_T3MANUALUPD;
+ break;
+
+ case SAMSUNG_PWM4:
+ tcon &= ~(0x07 << 20);
+ tcon |= S3C2410_TCON_T4MANUALUPD;
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Timer %d\n", mode);
+ break;
+ }
+
+ __raw_writel(tcnt, S3C2410_TCNTB(mode));
+ __raw_writel(tcnt, S3C2410_TCMPB(mode));
+ __raw_writel(tcon, S3C2410_TCON);
+}
+
+static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ switch (mode) {
+ case SAMSUNG_PWM0:
+ tcon |= S3C2410_TCON_T0START;
+ tcon &= ~S3C2410_TCON_T0MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T0RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T0RELOAD;
+ break;
+
+ case SAMSUNG_PWM1:
+ tcon |= S3C2410_TCON_T1START;
+ tcon &= ~S3C2410_TCON_T1MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T1RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T1RELOAD;
+ break;
+
+ case SAMSUNG_PWM2:
+ tcon |= S3C2410_TCON_T2START;
+ tcon &= ~S3C2410_TCON_T2MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T2RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T2RELOAD;
+ break;
+
+ case SAMSUNG_PWM3:
+ tcon |= S3C2410_TCON_T3START;
+ tcon &= ~S3C2410_TCON_T3MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T3RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T3RELOAD;
+ break;
+
+ case SAMSUNG_PWM4:
+ tcon |= S3C2410_TCON_T4START;
+ tcon &= ~S3C2410_TCON_T4MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T4RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T4RELOAD;
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Timer %d\n", mode);
+ break;
+ }
+ __raw_writel(tcon, S3C2410_TCON);
+}
+
+static int samsung_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ samsung_time_setup(timer_source.event_id, cycles);
+ samsung_time_start(timer_source.event_id, NON_PERIODIC);
+
+ return 0;
+}
+
+static void samsung_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ samsung_time_stop(timer_source.event_id);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ samsung_timer_resume();
+ break;
+ }
+}
+
+static void samsung_timer_resume(void)
+{
+ /* event timer restart */
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
+
+ /* source timer restart */
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
+}
+
+void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source)
+{
+ s3c_device_timer[event].dev.bus = &platform_bus_type;
+ s3c_device_timer[source].dev.bus = &platform_bus_type;
+
+ timer_source.event_id = event;
+ timer_source.source_id = source;
+}
+
+static struct clock_event_device time_event_device = {
+ .name = "samsung_event_timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = samsung_set_next_event,
+ .set_mode = samsung_set_mode,
+};
+
+static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction samsung_clock_event_irq = {
+ .name = "samsung_time_irq",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = samsung_clock_event_isr,
+ .dev_id = &time_event_device,
+};
+
+static void __init samsung_clockevent_init(void)
+{
+ unsigned long pclk;
+ unsigned long clock_rate;
+ unsigned int irq_number;
+ struct clk *tscaler;
+
+ pclk = clk_get_rate(timerclk);
+
+ tscaler = clk_get_parent(tdiv_event);
+
+ clk_set_rate(tscaler, pclk / TSCALER_DIV);
+ clk_set_rate(tdiv_event, pclk / TDIV);
+ clk_set_parent(tin_event, tdiv_event);
+
+ clock_rate = clk_get_rate(tin_event);
+ clock_count_per_tick = clock_rate / HZ;
+
+ time_event_device.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
+
+ irq_number = timer_source.event_id + IRQ_TIMER0;
+ setup_irq(irq_number, &samsung_clock_event_irq);
+}
+
+static void __iomem *samsung_timer_reg(void)
+{
+ unsigned long offset = 0;
+
+ switch (timer_source.source_id) {
+ case SAMSUNG_PWM0:
+ case SAMSUNG_PWM1:
+ case SAMSUNG_PWM2:
+ case SAMSUNG_PWM3:
+ offset = (timer_source.source_id * 0x0c) + 0x14;
+ break;
+
+ case SAMSUNG_PWM4:
+ offset = 0x40;
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
+ return NULL;
+ }
+
+ return S3C_TIMERREG(offset);
+}
+
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by U300 implementation.)
+ */
+static u32 notrace samsung_read_sched_clock(void)
+{
+ void __iomem *reg = samsung_timer_reg();
+
+ if (!reg)
+ return 0;
+
+ return ~__raw_readl(reg);
+}
+
+static void __init samsung_clocksource_init(void)
+{
+ unsigned long pclk;
+ unsigned long clock_rate;
+
+ pclk = clk_get_rate(timerclk);
+
+ clk_set_rate(tdiv_source, pclk / TDIV);
+ clk_set_parent(tin_source, tdiv_source);
+
+ clock_rate = clk_get_rate(tin_source);
+
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
+
+ setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
+
+ if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
+ clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
+ panic("samsung_clocksource_timer: can't register clocksource\n");
+}
+
+static void __init samsung_timer_resources(void)
+{
+
+ unsigned long event_id = timer_source.event_id;
+ unsigned long source_id = timer_source.source_id;
+ char devname[15];
+
+ timerclk = clk_get(NULL, "timers");
+ if (IS_ERR(timerclk))
+ panic("failed to get timers clock for timer");
+
+ clk_enable(timerclk);
+
+ sprintf(devname, "s3c24xx-pwm.%lu", event_id);
+ s3c_device_timer[event_id].id = event_id;
+ s3c_device_timer[event_id].dev.init_name = devname;
+
+ tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
+ if (IS_ERR(tin_event))
+ panic("failed to get pwm-tin clock for event timer");
+
+ tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
+ if (IS_ERR(tdiv_event))
+ panic("failed to get pwm-tdiv clock for event timer");
+
+ clk_enable(tin_event);
+
+ sprintf(devname, "s3c24xx-pwm.%lu", source_id);
+ s3c_device_timer[source_id].id = source_id;
+ s3c_device_timer[source_id].dev.init_name = devname;
+
+ tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
+ if (IS_ERR(tin_source))
+ panic("failed to get pwm-tin clock for source timer");
+
+ tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
+ if (IS_ERR(tdiv_source))
+ panic("failed to get pwm-tdiv clock for source timer");
+
+ clk_enable(tin_source);
+}
+
+void __init samsung_timer_init(void)
+{
+ samsung_timer_resources();
+ samsung_clockevent_init();
+ samsung_clocksource_init();
+}
This patch moves the Samsung PWM-based high resolution timer support code from arch/arm/plat-samsung to drivers/clocksource. This is a prerequisite for further work on making the driver more multiplatform and Device Tree friendly. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> --- arch/arm/plat-samsung/Kconfig | 8 - arch/arm/plat-samsung/Makefile | 1 - arch/arm/plat-samsung/samsung-time.c | 394 ----------------------------------- drivers/clocksource/Kconfig | 7 + drivers/clocksource/Makefile | 1 + drivers/clocksource/samsung-time.c | 394 +++++++++++++++++++++++++++++++++++ 6 files changed, 402 insertions(+), 403 deletions(-) delete mode 100644 arch/arm/plat-samsung/samsung-time.c create mode 100644 drivers/clocksource/samsung-time.c