| Message ID | 1363151289-685-1-git-send-email-sachin.kamat@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Kukjin, Please check this series. On 13 March 2013 10:38, Sachin Kamat <sachin.kamat@linaro.org> wrote: > Keypad pins/lines are board specific and should be added to respective > board dts files. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 56 ----------------------------- > 1 files changed, 0 insertions(+), 56 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > index 099cec7..704290f 100644 > --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > @@ -778,62 +778,6 @@ > samsung,pin-drv = <3>; > }; > > - keypad_col0: keypad-col0 { > - samsung,pins = "gpl2-0"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col1: keypad-col1 { > - samsung,pins = "gpl2-1"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col2: keypad-col2 { > - samsung,pins = "gpl2-2"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col3: keypad-col3 { > - samsung,pins = "gpl2-3"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col4: keypad-col4 { > - samsung,pins = "gpl2-4"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col5: keypad-col5 { > - samsung,pins = "gpl2-5"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col6: keypad-col6 { > - samsung,pins = "gpl2-6"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col7: keypad-col7 { > - samsung,pins = "gpl2-7"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > cam_port_b: cam-port-b { > samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", > "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", > -- > 1.7.4.1 >
Hi Kukjin, You seem to have missed out this series from your pull request to arm-soc tree. On 13 March 2013 10:38, Sachin Kamat <sachin.kamat@linaro.org> wrote: > Keypad pins/lines are board specific and should be added to respective > board dts files. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 56 ----------------------------- > 1 files changed, 0 insertions(+), 56 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > index 099cec7..704290f 100644 > --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > @@ -778,62 +778,6 @@ > samsung,pin-drv = <3>; > }; > > - keypad_col0: keypad-col0 { > - samsung,pins = "gpl2-0"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col1: keypad-col1 { > - samsung,pins = "gpl2-1"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col2: keypad-col2 { > - samsung,pins = "gpl2-2"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col3: keypad-col3 { > - samsung,pins = "gpl2-3"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col4: keypad-col4 { > - samsung,pins = "gpl2-4"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col5: keypad-col5 { > - samsung,pins = "gpl2-5"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col6: keypad-col6 { > - samsung,pins = "gpl2-6"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col7: keypad-col7 { > - samsung,pins = "gpl2-7"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > cam_port_b: cam-port-b { > samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", > "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", > -- > 1.7.4.1 >
Sachin Kamat wrote: > > Keypad pins/lines are board specific and should be added to respective > board dts files. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 56 ------------------------- > ---- > 1 files changed, 0 insertions(+), 56 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > index 099cec7..704290f 100644 > --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi > @@ -778,62 +778,6 @@ > samsung,pin-drv = <3>; > }; > > - keypad_col0: keypad-col0 { > - samsung,pins = "gpl2-0"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col1: keypad-col1 { > - samsung,pins = "gpl2-1"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col2: keypad-col2 { > - samsung,pins = "gpl2-2"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col3: keypad-col3 { > - samsung,pins = "gpl2-3"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col4: keypad-col4 { > - samsung,pins = "gpl2-4"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col5: keypad-col5 { > - samsung,pins = "gpl2-5"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col6: keypad-col6 { > - samsung,pins = "gpl2-6"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > - keypad_col7: keypad-col7 { > - samsung,pins = "gpl2-7"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > - > cam_port_b: cam-port-b { > samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", > "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", > -- > 1.7.4.1 Applied, this whole series. Thanks. - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 099cec7..704290f 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -778,62 +778,6 @@ samsung,pin-drv = <3>; }; - keypad_col0: keypad-col0 { - samsung,pins = "gpl2-0"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col1: keypad-col1 { - samsung,pins = "gpl2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col2: keypad-col2 { - samsung,pins = "gpl2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col3: keypad-col3 { - samsung,pins = "gpl2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col4: keypad-col4 { - samsung,pins = "gpl2-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col5: keypad-col5 { - samsung,pins = "gpl2-5"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col6: keypad-col6 { - samsung,pins = "gpl2-6"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col7: keypad-col7 { - samsung,pins = "gpl2-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - cam_port_b: cam-port-b { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
Keypad pins/lines are board specific and should be added to respective board dts files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> --- arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 56 ----------------------------- 1 files changed, 0 insertions(+), 56 deletions(-)