diff mbox

[5/9] thermal: exynos: Make the zone handling dependent on trip count

Message ID 1364297642-2746-6-git-send-email-amit.daniel@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Amit Kachhap March 26, 2013, 11:33 a.m. UTC
This code changes the zone handling to use the trip count passed
by the TMU driver. This also helps in adding more zone support.

Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos_common.c      |   56 +++++++++++++------------
 drivers/thermal/samsung/exynos_common.h      |   13 +++---
 include/linux/platform_data/exynos_thermal.h |    7 ++-
 3 files changed, 40 insertions(+), 36 deletions(-)

Comments

Eduardo Valentin April 11, 2013, 8:48 p.m. UTC | #1
On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
> This code changes the zone handling to use the trip count passed
> by the TMU driver. This also helps in adding more zone support.
>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>
> ---
> drivers/thermal/samsung/exynos_common.c      |   56 +++++++++++++------------
>   drivers/thermal/samsung/exynos_common.h      |   13 +++---
>   include/linux/platform_data/exynos_thermal.h |    7 ++-
>   3 files changed, 40 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_common.c b/drivers/thermal/samsung/exynos_common.c
> index 649d67c..0c0098d 100644
> --- a/drivers/thermal/samsung/exynos_common.c
> +++ b/drivers/thermal/samsung/exynos_common.c
> @@ -84,17 +84,16 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
>   static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
>   				 enum thermal_trip_type *type)
>   {
> -	switch (GET_ZONE(trip)) {
> -	case MONITOR_ZONE:
> -	case WARN_ZONE:
> -		*type = THERMAL_TRIP_ACTIVE;
> -		break;
> -	case PANIC_ZONE:
> -		*type = THERMAL_TRIP_CRITICAL;
> -		break;
> -	default:
> +	struct exynos_thermal_zone *th_zone = thermal->devdata;
> +	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
> +
> +	if (trip < 0 || trip >= max_trip)
>   		return -EINVAL;
> -	}
> +	else if (trip == (max_trip - 1))
> +		*type = THERMAL_TRIP_CRITICAL;
> +	else
> +		*type = THERMAL_TRIP_ACTIVE;
> +
>   	return 0;
>   }
>
> @@ -103,8 +102,9 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>   				unsigned long *temp)
>   {
>   	struct exynos_thermal_zone *th_zone = thermal->devdata;
> +	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>
> -	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> +	if (trip < 0 || trip >= max_trip)
>   		return -EINVAL;
>
>   	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> @@ -118,10 +118,10 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>   static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>   				unsigned long *temp)
>   {
> -	int ret;
> -	/* Panic zone */
> -	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> -	return ret;
> +	struct exynos_thermal_zone *th_zone = thermal->devdata;
> +	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
> +	/* Get the temp of highest trip*/
> +	return exynos_get_trip_temp(thermal, max_trip - 1, temp);
>   }
>
>   int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
> @@ -157,7 +157,7 @@ static int exynos_bind(struct thermal_zone_device *thermal,
>   	tab_size = data->cooling_data.freq_clip_count;
>
>   	if (tab_ptr == NULL || tab_size == 0)
> -		return -EINVAL;
> +		return 0;
>
>   	/* find the cooling device registered*/
>   	for (i = 0; i < th_zone->cool_dev_size; i++)
> @@ -206,7 +206,7 @@ static int exynos_unbind(struct thermal_zone_device *thermal,
>   	tab_size = data->cooling_data.freq_clip_count;
>
>   	if (tab_size == 0)
> -		return -EINVAL;
> +		return 0;
>
>   	/* find the cooling device registered*/
>   	for (i = 0; i < th_zone->cool_dev_size; i++)

The above two chunks are confusing. I dont understand how they are now 
supposed to be valid settings.

> @@ -366,19 +366,21 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
>   		return -ENOMEM;
>
>   	th_zone->sensor_conf = sensor_conf;
> -	cpumask_set_cpu(0, &mask_val);
> -	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> -	if (IS_ERR(th_zone->cool_dev[0])) {
> -		pr_err("Failed to register cpufreq cooling device\n");
> -		ret = -EINVAL;
> -		goto err_unregister;
> +	if (sensor_conf->cooling_data.freq_clip_count > 0) {
> +		cpumask_set_cpu(0, &mask_val);
> +		th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> +		if (IS_ERR(th_zone->cool_dev[0])) {
> +			pr_err("Failed to register cpufreq cooling device\n");
> +			ret = -EINVAL;
> +			goto err_unregister;
> +		}
> +		th_zone->cool_dev_size++;
>   	}
> -	th_zone->cool_dev_size++;
>
>   	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> -			EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
> -			sensor_conf->trip_data.trigger_falling ?
> -			0 : IDLE_INTERVAL);
> +		sensor_conf->trip_data.trip_count, 0, th_zone, &exynos_dev_ops,
> +		NULL, 0, sensor_conf->trip_data.trigger_falling ?
> +		0 : IDLE_INTERVAL);
>
>   	if (IS_ERR(th_zone->therm_dev)) {
>   		pr_err("Failed to register thermal zone device\n");
> diff --git a/drivers/thermal/samsung/exynos_common.h b/drivers/thermal/samsung/exynos_common.h
> index b8d289e..453e09a 100644
> --- a/drivers/thermal/samsung/exynos_common.h
> +++ b/drivers/thermal/samsung/exynos_common.h
> @@ -27,23 +27,22 @@
>   #define SENSOR_NAME_LEN	16
>   #define MAX_TRIP_COUNT	8
>   #define MAX_COOLING_DEVICE 4
> -#define MAX_THRESHOLD_LEVS 4
> +#define MAX_THRESHOLD_LEVS 5
>
>   #define ACTIVE_INTERVAL 500
>   #define IDLE_INTERVAL 10000
>   #define MCELSIUS	1000
>
>   /* CPU Zone information */
> -#define PANIC_ZONE      4
> -#define WARN_ZONE       3
> -#define MONITOR_ZONE    2
> -#define SAFE_ZONE       1
> +#define PANIC_ZONE	5
> +#define ALARM_ZONE	4
> +#define WARN_ZONE	3
> +#define MONITOR_ZONE	2
> +#define SAFE_ZONE	1
>


Updating this does not seam to be part of the intent of this patch. You 
probably want to send a separate patch for this.

>   #define GET_ZONE(trip) (trip + 2)
>   #define GET_TRIP(zone) (zone - 2)
>
> -#define EXYNOS_ZONE_COUNT	3
> -
>   struct	thermal_trip_point_conf {
>   	int trip_val[MAX_TRIP_COUNT];
>   	int trip_count;
> diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h
> index da7e627..893b758 100644
> --- a/include/linux/platform_data/exynos_thermal.h
> +++ b/include/linux/platform_data/exynos_thermal.h
> @@ -23,6 +23,8 @@
>   #define _LINUX_EXYNOS_THERMAL_H
>   #include <linux/cpu_cooling.h>
>
> +#define MAX_TRIP	5
> +


Should MAX_TRIP/THRESHOLD_LEVEL/PANIC_ZONE be somewhat same

>   enum calibration_type {
>   	TYPE_ONE_POINT_TRIMMING,
>   	TYPE_TWO_POINT_TRIMMING,
> @@ -100,11 +102,12 @@ struct freq_clip_table {
>   struct exynos_tmu_platform_data {
>   	u8 threshold;
>   	u8 threshold_falling;
> -	u8 trigger_levels[4];
> +	u8 trigger_levels[MAX_TRIP];
>   	bool trigger_level0_en;
>   	bool trigger_level1_en;
>   	bool trigger_level2_en;
>   	bool trigger_level3_en;
> +	bool trigger_level4_en;
>
>   	u8 gain;
>   	u8 reference_voltage;
> @@ -113,7 +116,7 @@ struct exynos_tmu_platform_data {
>
>   	enum calibration_type cal_type;
>   	enum soc_type type;
> -	struct freq_clip_table freq_tab[4];
> +	struct freq_clip_table freq_tab[MAX_TRIP];
>   	unsigned int freq_tab_count;
>   };
>   #endif /* _LINUX_EXYNOS_THERMAL_H */
>

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Amit Kachhap April 12, 2013, 11:16 a.m. UTC | #2
Hi Eduardo,

On Fri, Apr 12, 2013 at 2:18 AM, Eduardo Valentin
<eduardo.valentin@ti.com> wrote:
> On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
>>
>> This code changes the zone handling to use the trip count passed
>> by the TMU driver. This also helps in adding more zone support.
>>
>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>>
>> ---
>> drivers/thermal/samsung/exynos_common.c      |   56
>> +++++++++++++------------
>>   drivers/thermal/samsung/exynos_common.h      |   13 +++---
>>   include/linux/platform_data/exynos_thermal.h |    7 ++-
>>   3 files changed, 40 insertions(+), 36 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos_common.c
>> b/drivers/thermal/samsung/exynos_common.c
>> index 649d67c..0c0098d 100644
>> --- a/drivers/thermal/samsung/exynos_common.c
>> +++ b/drivers/thermal/samsung/exynos_common.c
>> @@ -84,17 +84,16 @@ static int exynos_set_mode(struct thermal_zone_device
>> *thermal,
>>   static int exynos_get_trip_type(struct thermal_zone_device *thermal, int
>> trip,
>>                                  enum thermal_trip_type *type)
>>   {
>> -       switch (GET_ZONE(trip)) {
>> -       case MONITOR_ZONE:
>> -       case WARN_ZONE:
>> -               *type = THERMAL_TRIP_ACTIVE;
>> -               break;
>> -       case PANIC_ZONE:
>> -               *type = THERMAL_TRIP_CRITICAL;
>> -               break;
>> -       default:
>> +       struct exynos_thermal_zone *th_zone = thermal->devdata;
>> +       int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>> +
>> +       if (trip < 0 || trip >= max_trip)
>>                 return -EINVAL;
>> -       }
>> +       else if (trip == (max_trip - 1))
>> +               *type = THERMAL_TRIP_CRITICAL;
>> +       else
>> +               *type = THERMAL_TRIP_ACTIVE;
>> +
>>         return 0;
>>   }
>>
>> @@ -103,8 +102,9 @@ static int exynos_get_trip_temp(struct
>> thermal_zone_device *thermal, int trip,
>>                                 unsigned long *temp)
>>   {
>>         struct exynos_thermal_zone *th_zone = thermal->devdata;
>> +       int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>>
>> -       if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
>> +       if (trip < 0 || trip >= max_trip)
>>                 return -EINVAL;
>>
>>         *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
>> @@ -118,10 +118,10 @@ static int exynos_get_trip_temp(struct
>> thermal_zone_device *thermal, int trip,
>>   static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>>                                 unsigned long *temp)
>>   {
>> -       int ret;
>> -       /* Panic zone */
>> -       ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
>> -       return ret;
>> +       struct exynos_thermal_zone *th_zone = thermal->devdata;
>> +       int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>> +       /* Get the temp of highest trip*/
>> +       return exynos_get_trip_temp(thermal, max_trip - 1, temp);
>>   }
>>
>>   int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
>> @@ -157,7 +157,7 @@ static int exynos_bind(struct thermal_zone_device
>> *thermal,
>>         tab_size = data->cooling_data.freq_clip_count;
>>
>>         if (tab_ptr == NULL || tab_size == 0)
>> -               return -EINVAL;
>> +               return 0;
>>
>>         /* find the cooling device registered*/
>>         for (i = 0; i < th_zone->cool_dev_size; i++)
>> @@ -206,7 +206,7 @@ static int exynos_unbind(struct thermal_zone_device
>> *thermal,
>>         tab_size = data->cooling_data.freq_clip_count;
>>
>>         if (tab_size == 0)
>> -               return -EINVAL;
>> +               return 0;
>>
>>         /* find the cooling device registered*/
>>         for (i = 0; i < th_zone->cool_dev_size; i++)
>
>
> The above two chunks are confusing. I dont understand how they are now
> supposed to be valid settings.
Well it is made valid when there is no cooling table registered and
hence no cooling.
>
>
>> @@ -366,19 +366,21 @@ int exynos_register_thermal(struct
>> thermal_sensor_conf *sensor_conf)
>>                 return -ENOMEM;
>>
>>         th_zone->sensor_conf = sensor_conf;
>> -       cpumask_set_cpu(0, &mask_val);
>> -       th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
>> -       if (IS_ERR(th_zone->cool_dev[0])) {
>> -               pr_err("Failed to register cpufreq cooling device\n");
>> -               ret = -EINVAL;
>> -               goto err_unregister;
>> +       if (sensor_conf->cooling_data.freq_clip_count > 0) {
>> +               cpumask_set_cpu(0, &mask_val);
>> +               th_zone->cool_dev[0] =
>> cpufreq_cooling_register(&mask_val);
>> +               if (IS_ERR(th_zone->cool_dev[0])) {
>> +                       pr_err("Failed to register cpufreq cooling
>> device\n");
>> +                       ret = -EINVAL;
>> +                       goto err_unregister;
>> +               }
>> +               th_zone->cool_dev_size++;
>>         }
>> -       th_zone->cool_dev_size++;
>>
>>         th_zone->therm_dev =
>> thermal_zone_device_register(sensor_conf->name,
>> -                       EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops,
>> NULL, 0,
>> -                       sensor_conf->trip_data.trigger_falling ?
>> -                       0 : IDLE_INTERVAL);
>> +               sensor_conf->trip_data.trip_count, 0, th_zone,
>> &exynos_dev_ops,
>> +               NULL, 0, sensor_conf->trip_data.trigger_falling ?
>> +               0 : IDLE_INTERVAL);
>>
>>         if (IS_ERR(th_zone->therm_dev)) {
>>                 pr_err("Failed to register thermal zone device\n");
>> diff --git a/drivers/thermal/samsung/exynos_common.h
>> b/drivers/thermal/samsung/exynos_common.h
>> index b8d289e..453e09a 100644
>> --- a/drivers/thermal/samsung/exynos_common.h
>> +++ b/drivers/thermal/samsung/exynos_common.h
>> @@ -27,23 +27,22 @@
>>   #define SENSOR_NAME_LEN       16
>>   #define MAX_TRIP_COUNT        8
>>   #define MAX_COOLING_DEVICE 4
>> -#define MAX_THRESHOLD_LEVS 4
>> +#define MAX_THRESHOLD_LEVS 5
>>
>>   #define ACTIVE_INTERVAL 500
>>   #define IDLE_INTERVAL 10000
>>   #define MCELSIUS      1000
>>
>>   /* CPU Zone information */
>> -#define PANIC_ZONE      4
>> -#define WARN_ZONE       3
>> -#define MONITOR_ZONE    2
>> -#define SAFE_ZONE       1
>> +#define PANIC_ZONE     5
>> +#define ALARM_ZONE     4
>> +#define WARN_ZONE      3
>> +#define MONITOR_ZONE   2
>> +#define SAFE_ZONE      1
>>
>
>
> Updating this does not seam to be part of the intent of this patch. You
> probably want to send a separate patch for this.
yes right.
>
>
>>   #define GET_ZONE(trip) (trip + 2)
>>   #define GET_TRIP(zone) (zone - 2)
>>
>> -#define EXYNOS_ZONE_COUNT      3
>> -
>>   struct        thermal_trip_point_conf {
>>         int trip_val[MAX_TRIP_COUNT];
>>         int trip_count;
>> diff --git a/include/linux/platform_data/exynos_thermal.h
>> b/include/linux/platform_data/exynos_thermal.h
>> index da7e627..893b758 100644
>> --- a/include/linux/platform_data/exynos_thermal.h
>> +++ b/include/linux/platform_data/exynos_thermal.h
>> @@ -23,6 +23,8 @@
>>   #define _LINUX_EXYNOS_THERMAL_H
>>   #include <linux/cpu_cooling.h>
>>
>> +#define MAX_TRIP       5
>> +
>
>
>
> Should MAX_TRIP/THRESHOLD_LEVEL/PANIC_ZONE be somewhat same
Yes they can be removed.
>
>
>>   enum calibration_type {
>>         TYPE_ONE_POINT_TRIMMING,
>>         TYPE_TWO_POINT_TRIMMING,
>> @@ -100,11 +102,12 @@ struct freq_clip_table {
>>   struct exynos_tmu_platform_data {
>>         u8 threshold;
>>         u8 threshold_falling;
>> -       u8 trigger_levels[4];
>> +       u8 trigger_levels[MAX_TRIP];
>>         bool trigger_level0_en;
>>         bool trigger_level1_en;
>>         bool trigger_level2_en;
>>         bool trigger_level3_en;
>> +       bool trigger_level4_en;
>>
>>         u8 gain;
>>         u8 reference_voltage;
>> @@ -113,7 +116,7 @@ struct exynos_tmu_platform_data {
>>
>>         enum calibration_type cal_type;
>>         enum soc_type type;
>> -       struct freq_clip_table freq_tab[4];
>> +       struct freq_clip_table freq_tab[MAX_TRIP];
>>         unsigned int freq_tab_count;
>>   };
>>   #endif /* _LINUX_EXYNOS_THERMAL_H */
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Eduardo Valentin April 12, 2013, 12:45 p.m. UTC | #3
On 12-04-2013 07:16, amit daniel kachhap wrote:
> Hi Eduardo,
>
> On Fri, Apr 12, 2013 at 2:18 AM, Eduardo Valentin
> <eduardo.valentin@ti.com> wrote:
>> On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
>>>
>>> This code changes the zone handling to use the trip count passed
>>> by the TMU driver. This also helps in adding more zone support.
>>>
>>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>>>
>>> ---
>>> drivers/thermal/samsung/exynos_common.c      |   56
>>> +++++++++++++------------
>>>    drivers/thermal/samsung/exynos_common.h      |   13 +++---
>>>    include/linux/platform_data/exynos_thermal.h |    7 ++-
>>>    3 files changed, 40 insertions(+), 36 deletions(-)
>>>
>>> diff --git a/drivers/thermal/samsung/exynos_common.c
>>> b/drivers/thermal/samsung/exynos_common.c
>>> index 649d67c..0c0098d 100644
>>> --- a/drivers/thermal/samsung/exynos_common.c
>>> +++ b/drivers/thermal/samsung/exynos_common.c
>>> @@ -84,17 +84,16 @@ static int exynos_set_mode(struct thermal_zone_device
>>> *thermal,
>>>    static int exynos_get_trip_type(struct thermal_zone_device *thermal, int
>>> trip,
>>>                                   enum thermal_trip_type *type)
>>>    {
>>> -       switch (GET_ZONE(trip)) {
>>> -       case MONITOR_ZONE:
>>> -       case WARN_ZONE:
>>> -               *type = THERMAL_TRIP_ACTIVE;
>>> -               break;
>>> -       case PANIC_ZONE:
>>> -               *type = THERMAL_TRIP_CRITICAL;
>>> -               break;
>>> -       default:
>>> +       struct exynos_thermal_zone *th_zone = thermal->devdata;
>>> +       int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>>> +
>>> +       if (trip < 0 || trip >= max_trip)
>>>                  return -EINVAL;
>>> -       }
>>> +       else if (trip == (max_trip - 1))
>>> +               *type = THERMAL_TRIP_CRITICAL;
>>> +       else
>>> +               *type = THERMAL_TRIP_ACTIVE;
>>> +
>>>          return 0;
>>>    }
>>>
>>> @@ -103,8 +102,9 @@ static int exynos_get_trip_temp(struct
>>> thermal_zone_device *thermal, int trip,
>>>                                  unsigned long *temp)
>>>    {
>>>          struct exynos_thermal_zone *th_zone = thermal->devdata;
>>> +       int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>>>
>>> -       if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
>>> +       if (trip < 0 || trip >= max_trip)
>>>                  return -EINVAL;
>>>
>>>          *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
>>> @@ -118,10 +118,10 @@ static int exynos_get_trip_temp(struct
>>> thermal_zone_device *thermal, int trip,
>>>    static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>>>                                  unsigned long *temp)
>>>    {
>>> -       int ret;
>>> -       /* Panic zone */
>>> -       ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
>>> -       return ret;
>>> +       struct exynos_thermal_zone *th_zone = thermal->devdata;
>>> +       int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>>> +       /* Get the temp of highest trip*/
>>> +       return exynos_get_trip_temp(thermal, max_trip - 1, temp);
>>>    }
>>>
>>>    int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
>>> @@ -157,7 +157,7 @@ static int exynos_bind(struct thermal_zone_device
>>> *thermal,
>>>          tab_size = data->cooling_data.freq_clip_count;
>>>
>>>          if (tab_ptr == NULL || tab_size == 0)
>>> -               return -EINVAL;
>>> +               return 0;
>>>
>>>          /* find the cooling device registered*/
>>>          for (i = 0; i < th_zone->cool_dev_size; i++)
>>> @@ -206,7 +206,7 @@ static int exynos_unbind(struct thermal_zone_device
>>> *thermal,
>>>          tab_size = data->cooling_data.freq_clip_count;
>>>
>>>          if (tab_size == 0)
>>> -               return -EINVAL;
>>> +               return 0;
>>>
>>>          /* find the cooling device registered*/
>>>          for (i = 0; i < th_zone->cool_dev_size; i++)
>>
>>
>> The above two chunks are confusing. I dont understand how they are now
>> supposed to be valid settings.
> Well it is made valid when there is no cooling table registered and
> hence no cooling.

I suppose that is the case when you have sensors covering domains 
different of your CPU domain, where you cool off using cpufreq (table), 
right?

I suggest you adding a comment explaining why this is now valid..


>>
>>
>>> @@ -366,19 +366,21 @@ int exynos_register_thermal(struct
>>> thermal_sensor_conf *sensor_conf)
>>>                  return -ENOMEM;
>>>
>>>          th_zone->sensor_conf = sensor_conf;
>>> -       cpumask_set_cpu(0, &mask_val);
>>> -       th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
>>> -       if (IS_ERR(th_zone->cool_dev[0])) {
>>> -               pr_err("Failed to register cpufreq cooling device\n");
>>> -               ret = -EINVAL;
>>> -               goto err_unregister;
>>> +       if (sensor_conf->cooling_data.freq_clip_count > 0) {
>>> +               cpumask_set_cpu(0, &mask_val);
>>> +               th_zone->cool_dev[0] =
>>> cpufreq_cooling_register(&mask_val);
>>> +               if (IS_ERR(th_zone->cool_dev[0])) {
>>> +                       pr_err("Failed to register cpufreq cooling
>>> device\n");
>>> +                       ret = -EINVAL;
>>> +                       goto err_unregister;
>>> +               }
>>> +               th_zone->cool_dev_size++;
>>>          }
>>> -       th_zone->cool_dev_size++;
>>>
>>>          th_zone->therm_dev =
>>> thermal_zone_device_register(sensor_conf->name,
>>> -                       EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops,
>>> NULL, 0,
>>> -                       sensor_conf->trip_data.trigger_falling ?
>>> -                       0 : IDLE_INTERVAL);
>>> +               sensor_conf->trip_data.trip_count, 0, th_zone,
>>> &exynos_dev_ops,
>>> +               NULL, 0, sensor_conf->trip_data.trigger_falling ?
>>> +               0 : IDLE_INTERVAL);
>>>
>>>          if (IS_ERR(th_zone->therm_dev)) {
>>>                  pr_err("Failed to register thermal zone device\n");
>>> diff --git a/drivers/thermal/samsung/exynos_common.h
>>> b/drivers/thermal/samsung/exynos_common.h
>>> index b8d289e..453e09a 100644
>>> --- a/drivers/thermal/samsung/exynos_common.h
>>> +++ b/drivers/thermal/samsung/exynos_common.h
>>> @@ -27,23 +27,22 @@
>>>    #define SENSOR_NAME_LEN       16
>>>    #define MAX_TRIP_COUNT        8
>>>    #define MAX_COOLING_DEVICE 4
>>> -#define MAX_THRESHOLD_LEVS 4
>>> +#define MAX_THRESHOLD_LEVS 5
>>>
>>>    #define ACTIVE_INTERVAL 500
>>>    #define IDLE_INTERVAL 10000
>>>    #define MCELSIUS      1000
>>>
>>>    /* CPU Zone information */
>>> -#define PANIC_ZONE      4
>>> -#define WARN_ZONE       3
>>> -#define MONITOR_ZONE    2
>>> -#define SAFE_ZONE       1
>>> +#define PANIC_ZONE     5
>>> +#define ALARM_ZONE     4
>>> +#define WARN_ZONE      3
>>> +#define MONITOR_ZONE   2
>>> +#define SAFE_ZONE      1
>>>
>>
>>
>> Updating this does not seam to be part of the intent of this patch. You
>> probably want to send a separate patch for this.
> yes right.
>>
>>
>>>    #define GET_ZONE(trip) (trip + 2)
>>>    #define GET_TRIP(zone) (zone - 2)
>>>
>>> -#define EXYNOS_ZONE_COUNT      3
>>> -
>>>    struct        thermal_trip_point_conf {
>>>          int trip_val[MAX_TRIP_COUNT];
>>>          int trip_count;
>>> diff --git a/include/linux/platform_data/exynos_thermal.h
>>> b/include/linux/platform_data/exynos_thermal.h
>>> index da7e627..893b758 100644
>>> --- a/include/linux/platform_data/exynos_thermal.h
>>> +++ b/include/linux/platform_data/exynos_thermal.h
>>> @@ -23,6 +23,8 @@
>>>    #define _LINUX_EXYNOS_THERMAL_H
>>>    #include <linux/cpu_cooling.h>
>>>
>>> +#define MAX_TRIP       5
>>> +
>>
>>
>>
>> Should MAX_TRIP/THRESHOLD_LEVEL/PANIC_ZONE be somewhat same
> Yes they can be removed.
>>
>>
>>>    enum calibration_type {
>>>          TYPE_ONE_POINT_TRIMMING,
>>>          TYPE_TWO_POINT_TRIMMING,
>>> @@ -100,11 +102,12 @@ struct freq_clip_table {
>>>    struct exynos_tmu_platform_data {
>>>          u8 threshold;
>>>          u8 threshold_falling;
>>> -       u8 trigger_levels[4];
>>> +       u8 trigger_levels[MAX_TRIP];
>>>          bool trigger_level0_en;
>>>          bool trigger_level1_en;
>>>          bool trigger_level2_en;
>>>          bool trigger_level3_en;
>>> +       bool trigger_level4_en;
>>>
>>>          u8 gain;
>>>          u8 reference_voltage;
>>> @@ -113,7 +116,7 @@ struct exynos_tmu_platform_data {
>>>
>>>          enum calibration_type cal_type;
>>>          enum soc_type type;
>>> -       struct freq_clip_table freq_tab[4];
>>> +       struct freq_clip_table freq_tab[MAX_TRIP];
>>>          unsigned int freq_tab_count;
>>>    };
>>>    #endif /* _LINUX_EXYNOS_THERMAL_H */
>>>
>>
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos_common.c b/drivers/thermal/samsung/exynos_common.c
index 649d67c..0c0098d 100644
--- a/drivers/thermal/samsung/exynos_common.c
+++ b/drivers/thermal/samsung/exynos_common.c
@@ -84,17 +84,16 @@  static int exynos_set_mode(struct thermal_zone_device *thermal,
 static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
 				 enum thermal_trip_type *type)
 {
-	switch (GET_ZONE(trip)) {
-	case MONITOR_ZONE:
-	case WARN_ZONE:
-		*type = THERMAL_TRIP_ACTIVE;
-		break;
-	case PANIC_ZONE:
-		*type = THERMAL_TRIP_CRITICAL;
-		break;
-	default:
+	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
+
+	if (trip < 0 || trip >= max_trip)
 		return -EINVAL;
-	}
+	else if (trip == (max_trip - 1))
+		*type = THERMAL_TRIP_CRITICAL;
+	else
+		*type = THERMAL_TRIP_ACTIVE;
+
 	return 0;
 }
 
@@ -103,8 +102,9 @@  static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
 				unsigned long *temp)
 {
 	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
 
-	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
+	if (trip < 0 || trip >= max_trip)
 		return -EINVAL;
 
 	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
@@ -118,10 +118,10 @@  static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
 static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
 				unsigned long *temp)
 {
-	int ret;
-	/* Panic zone */
-	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
-	return ret;
+	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
+	/* Get the temp of highest trip*/
+	return exynos_get_trip_temp(thermal, max_trip - 1, temp);
 }
 
 int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
@@ -157,7 +157,7 @@  static int exynos_bind(struct thermal_zone_device *thermal,
 	tab_size = data->cooling_data.freq_clip_count;
 
 	if (tab_ptr == NULL || tab_size == 0)
-		return -EINVAL;
+		return 0;
 
 	/* find the cooling device registered*/
 	for (i = 0; i < th_zone->cool_dev_size; i++)
@@ -206,7 +206,7 @@  static int exynos_unbind(struct thermal_zone_device *thermal,
 	tab_size = data->cooling_data.freq_clip_count;
 
 	if (tab_size == 0)
-		return -EINVAL;
+		return 0;
 
 	/* find the cooling device registered*/
 	for (i = 0; i < th_zone->cool_dev_size; i++)
@@ -366,19 +366,21 @@  int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 		return -ENOMEM;
 
 	th_zone->sensor_conf = sensor_conf;
-	cpumask_set_cpu(0, &mask_val);
-	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
-	if (IS_ERR(th_zone->cool_dev[0])) {
-		pr_err("Failed to register cpufreq cooling device\n");
-		ret = -EINVAL;
-		goto err_unregister;
+	if (sensor_conf->cooling_data.freq_clip_count > 0) {
+		cpumask_set_cpu(0, &mask_val);
+		th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
+		if (IS_ERR(th_zone->cool_dev[0])) {
+			pr_err("Failed to register cpufreq cooling device\n");
+			ret = -EINVAL;
+			goto err_unregister;
+		}
+		th_zone->cool_dev_size++;
 	}
-	th_zone->cool_dev_size++;
 
 	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
-			EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
-			sensor_conf->trip_data.trigger_falling ?
-			0 : IDLE_INTERVAL);
+		sensor_conf->trip_data.trip_count, 0, th_zone, &exynos_dev_ops,
+		NULL, 0, sensor_conf->trip_data.trigger_falling ?
+		0 : IDLE_INTERVAL);
 
 	if (IS_ERR(th_zone->therm_dev)) {
 		pr_err("Failed to register thermal zone device\n");
diff --git a/drivers/thermal/samsung/exynos_common.h b/drivers/thermal/samsung/exynos_common.h
index b8d289e..453e09a 100644
--- a/drivers/thermal/samsung/exynos_common.h
+++ b/drivers/thermal/samsung/exynos_common.h
@@ -27,23 +27,22 @@ 
 #define SENSOR_NAME_LEN	16
 #define MAX_TRIP_COUNT	8
 #define MAX_COOLING_DEVICE 4
-#define MAX_THRESHOLD_LEVS 4
+#define MAX_THRESHOLD_LEVS 5
 
 #define ACTIVE_INTERVAL 500
 #define IDLE_INTERVAL 10000
 #define MCELSIUS	1000
 
 /* CPU Zone information */
-#define PANIC_ZONE      4
-#define WARN_ZONE       3
-#define MONITOR_ZONE    2
-#define SAFE_ZONE       1
+#define PANIC_ZONE	5
+#define ALARM_ZONE	4
+#define WARN_ZONE	3
+#define MONITOR_ZONE	2
+#define SAFE_ZONE	1
 
 #define GET_ZONE(trip) (trip + 2)
 #define GET_TRIP(zone) (zone - 2)
 
-#define EXYNOS_ZONE_COUNT	3
-
 struct	thermal_trip_point_conf {
 	int trip_val[MAX_TRIP_COUNT];
 	int trip_count;
diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h
index da7e627..893b758 100644
--- a/include/linux/platform_data/exynos_thermal.h
+++ b/include/linux/platform_data/exynos_thermal.h
@@ -23,6 +23,8 @@ 
 #define _LINUX_EXYNOS_THERMAL_H
 #include <linux/cpu_cooling.h>
 
+#define MAX_TRIP	5
+
 enum calibration_type {
 	TYPE_ONE_POINT_TRIMMING,
 	TYPE_TWO_POINT_TRIMMING,
@@ -100,11 +102,12 @@  struct freq_clip_table {
 struct exynos_tmu_platform_data {
 	u8 threshold;
 	u8 threshold_falling;
-	u8 trigger_levels[4];
+	u8 trigger_levels[MAX_TRIP];
 	bool trigger_level0_en;
 	bool trigger_level1_en;
 	bool trigger_level2_en;
 	bool trigger_level3_en;
+	bool trigger_level4_en;
 
 	u8 gain;
 	u8 reference_voltage;
@@ -113,7 +116,7 @@  struct exynos_tmu_platform_data {
 
 	enum calibration_type cal_type;
 	enum soc_type type;
-	struct freq_clip_table freq_tab[4];
+	struct freq_clip_table freq_tab[MAX_TRIP];
 	unsigned int freq_tab_count;
 };
 #endif /* _LINUX_EXYNOS_THERMAL_H */