diff mbox

[6/9] thermal: exynos: small cleanups to prepare for adding exynos5440 driver

Message ID 1364297642-2746-7-git-send-email-amit.daniel@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Amit Kachhap March 26, 2013, 11:33 a.m. UTC
Add calib mode, trigger types and trigger_enable array. This is needed
for adding exynos5440 TMU driver.

Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos4210_thermal.c |   30 ++++++++++++------------
 include/linux/platform_data/exynos_thermal.h |   32 +++++++++++++-------------
 2 files changed, 31 insertions(+), 31 deletions(-)

Comments

Eduardo Valentin April 11, 2013, 8:54 p.m. UTC | #1
Amit,

On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
> Add calib mode, trigger types and trigger_enable array. This is needed
> for adding exynos5440 TMU driver.
>

I dont think the above are small cleanups. I d rather split this patch 
into three, one per change and describe them properly.

> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>
> ---
> drivers/thermal/samsung/exynos4210_thermal.c |   30 ++++++++++++------------
>   include/linux/platform_data/exynos_thermal.h |   32 +++++++++++++-------------
>   2 files changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos4210_thermal.c b/drivers/thermal/samsung/exynos4210_thermal.c
> index 09ea8c8..58d16ac 100644
> --- a/drivers/thermal/samsung/exynos4210_thermal.c
> +++ b/drivers/thermal/samsung/exynos4210_thermal.c
> @@ -276,10 +276,10 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
>
>   	if (on) {
>   		con |= EXYNOS_TMU_CORE_ON;
> -		interrupt_en = pdata->trigger_level3_en << 12 |
> -			pdata->trigger_level2_en << 8 |
> -			pdata->trigger_level1_en << 4 |
> -			pdata->trigger_level0_en;
> +		interrupt_en = pdata->trigger_enable[3] << 12 |
> +			pdata->trigger_enable[2] << 8 |
> +			pdata->trigger_enable[1] << 4 |
> +			pdata->trigger_enable[0];
>   		if (pdata->threshold_falling)
>   			interrupt_en |= interrupt_en << 16;
>   	} else {
> @@ -394,10 +394,10 @@ static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
>   	.trigger_levels[0] = 5,
>   	.trigger_levels[1] = 20,
>   	.trigger_levels[2] = 30,
> -	.trigger_level0_en = 1,
> -	.trigger_level1_en = 1,
> -	.trigger_level2_en = 1,
> -	.trigger_level3_en = 0,
> +	.trigger_enable[0] = 1,
> +	.trigger_enable[1] = 1,
> +	.trigger_enable[2] = 1,
> +	.trigger_enable[3] = 0,
>   	.gain = 15,
>   	.reference_voltage = 7,
>   	.cal_type = TYPE_ONE_POINT_TRIMMING,
> @@ -423,10 +423,10 @@ static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
>   	.trigger_levels[0] = 85,
>   	.trigger_levels[1] = 103,
>   	.trigger_levels[2] = 110,
> -	.trigger_level0_en = 1,
> -	.trigger_level1_en = 1,
> -	.trigger_level2_en = 1,
> -	.trigger_level3_en = 0,
> +	.trigger_enable[0] = 1,
> +	.trigger_enable[1] = 1,
> +	.trigger_enable[2] = 1,
> +	.trigger_enable[3] = 0,
>   	.gain = 8,
>   	.reference_voltage = 16,
>   	.noise_cancel_mode = 4,
> @@ -566,9 +566,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>
>   	/* Register the sensor with thermal management interface */
>   	(&exynos_sensor_conf)->driver_data = data;
> -	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
> -			pdata->trigger_level1_en + pdata->trigger_level2_en +
> -			pdata->trigger_level3_en;
> +	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
> +			pdata->trigger_enable[1] + pdata->trigger_enable[2] +
> +			pdata->trigger_enable[3];
>
>   	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
>   		exynos_sensor_conf.trip_data.trip_val[i] =
> diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h
> index 893b758..1090f48 100644
> --- a/include/linux/platform_data/exynos_thermal.h
> +++ b/include/linux/platform_data/exynos_thermal.h
> @@ -31,6 +31,17 @@ enum calibration_type {
>   	TYPE_NONE,
>   };
>
> +enum calibration_mode {
> +	SW_MODE,
> +	HW_MODE,
> +};
> +
> +enum trigger_type {
> +	ACTIVE,
> +	CRITICAL,
> +	HW_TRIP,
> +};
> +
>   enum soc_type {
>   	SOC_ARCH_EXYNOS4210 = 1,
>   	SOC_ARCH_EXYNOS,
> @@ -71,18 +82,9 @@ struct freq_clip_table {
>    *	3: temperature for trigger_level3 interrupt
>    *	   condition for trigger_level3 interrupt:
>    *		current temperature > threshold + trigger_levels[3]
> - * @trigger_level0_en:
> + * @trigger_enable[]: array to denote which trigger levels are enabled.
>    *	1 = enable trigger_level0 interrupt,
>    *	0 = disable trigger_level0 interrupt
> - * @trigger_level1_en:
> - *	1 = enable trigger_level1 interrupt,
> - *	0 = disable trigger_level1 interrupt
> - * @trigger_level2_en:
> - *	1 = enable trigger_level2 interrupt,
> - *	0 = disable trigger_level2 interrupt
> - * @trigger_level3_en:
> - *	1 = enable trigger_level3 interrupt,
> - *	0 = disable trigger_level3 interrupt
>    * @gain: gain of amplifier in the positive-TC generator block
>    *	0 <= gain <= 15
>    * @reference_voltage: reference voltage of amplifier
> @@ -93,6 +95,7 @@ struct freq_clip_table {
>    * @type: determines the type of SOC
>    * @efuse_value: platform defined fuse value
>    * @cal_type: calibration type for temperature
> + * @cal_mode: calibration mode for temperature

How about trigger_type?
>    * @freq_clip_table: Table representing frequency reduction percentage.
>    * @freq_tab_count: Count of the above table as frequency reduction may
>    *	applicable to only some of the trigger levels.
> @@ -103,18 +106,15 @@ struct exynos_tmu_platform_data {
>   	u8 threshold;
>   	u8 threshold_falling;
>   	u8 trigger_levels[MAX_TRIP];
> -	bool trigger_level0_en;
> -	bool trigger_level1_en;
> -	bool trigger_level2_en;
> -	bool trigger_level3_en;
> -	bool trigger_level4_en;
> -
> +	enum trigger_type trigger_type[MAX_TRIP];
> +	bool trigger_enable[MAX_TRIP];
>   	u8 gain;
>   	u8 reference_voltage;
>   	u8 noise_cancel_mode;
>   	u32 efuse_value;
>
>   	enum calibration_type cal_type;
> +	enum calibration_mode cal_mode;
>   	enum soc_type type;
>   	struct freq_clip_table freq_tab[MAX_TRIP];
>   	unsigned int freq_tab_count;
>

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Amit Kachhap April 12, 2013, 11:18 a.m. UTC | #2
Hi Eduardo,


On Fri, Apr 12, 2013 at 2:24 AM, Eduardo Valentin
<eduardo.valentin@ti.com> wrote:
> Amit,
>
>
> On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
>>
>> Add calib mode, trigger types and trigger_enable array. This is needed
>> for adding exynos5440 TMU driver.
>>
>
> I dont think the above are small cleanups. I d rather split this patch into
> three, one per change and describe them properly.
Yes Right.
>
>
>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>>
>> ---
>> drivers/thermal/samsung/exynos4210_thermal.c |   30
>> ++++++++++++------------
>>   include/linux/platform_data/exynos_thermal.h |   32
>> +++++++++++++-------------
>>   2 files changed, 31 insertions(+), 31 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos4210_thermal.c
>> b/drivers/thermal/samsung/exynos4210_thermal.c
>> index 09ea8c8..58d16ac 100644
>> --- a/drivers/thermal/samsung/exynos4210_thermal.c
>> +++ b/drivers/thermal/samsung/exynos4210_thermal.c
>> @@ -276,10 +276,10 @@ static void exynos_tmu_control(struct
>> platform_device *pdev, bool on)
>>
>>         if (on) {
>>                 con |= EXYNOS_TMU_CORE_ON;
>> -               interrupt_en = pdata->trigger_level3_en << 12 |
>> -                       pdata->trigger_level2_en << 8 |
>> -                       pdata->trigger_level1_en << 4 |
>> -                       pdata->trigger_level0_en;
>> +               interrupt_en = pdata->trigger_enable[3] << 12 |
>> +                       pdata->trigger_enable[2] << 8 |
>> +                       pdata->trigger_enable[1] << 4 |
>> +                       pdata->trigger_enable[0];
>>                 if (pdata->threshold_falling)
>>                         interrupt_en |= interrupt_en << 16;
>>         } else {
>> @@ -394,10 +394,10 @@ static struct exynos_tmu_platform_data const
>> exynos4210_default_tmu_data = {
>>         .trigger_levels[0] = 5,
>>         .trigger_levels[1] = 20,
>>         .trigger_levels[2] = 30,
>> -       .trigger_level0_en = 1,
>> -       .trigger_level1_en = 1,
>> -       .trigger_level2_en = 1,
>> -       .trigger_level3_en = 0,
>> +       .trigger_enable[0] = 1,
>> +       .trigger_enable[1] = 1,
>> +       .trigger_enable[2] = 1,
>> +       .trigger_enable[3] = 0,
>>         .gain = 15,
>>         .reference_voltage = 7,
>>         .cal_type = TYPE_ONE_POINT_TRIMMING,
>> @@ -423,10 +423,10 @@ static struct exynos_tmu_platform_data const
>> exynos_default_tmu_data = {
>>         .trigger_levels[0] = 85,
>>         .trigger_levels[1] = 103,
>>         .trigger_levels[2] = 110,
>> -       .trigger_level0_en = 1,
>> -       .trigger_level1_en = 1,
>> -       .trigger_level2_en = 1,
>> -       .trigger_level3_en = 0,
>> +       .trigger_enable[0] = 1,
>> +       .trigger_enable[1] = 1,
>> +       .trigger_enable[2] = 1,
>> +       .trigger_enable[3] = 0,
>>         .gain = 8,
>>         .reference_voltage = 16,
>>         .noise_cancel_mode = 4,
>> @@ -566,9 +566,9 @@ static int exynos_tmu_probe(struct platform_device
>> *pdev)
>>
>>         /* Register the sensor with thermal management interface */
>>         (&exynos_sensor_conf)->driver_data = data;
>> -       exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en
>> +
>> -                       pdata->trigger_level1_en +
>> pdata->trigger_level2_en +
>> -                       pdata->trigger_level3_en;
>> +       exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0]
>> +
>> +                       pdata->trigger_enable[1] +
>> pdata->trigger_enable[2] +
>> +                       pdata->trigger_enable[3];
>>
>>         for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
>>                 exynos_sensor_conf.trip_data.trip_val[i] =
>> diff --git a/include/linux/platform_data/exynos_thermal.h
>> b/include/linux/platform_data/exynos_thermal.h
>> index 893b758..1090f48 100644
>> --- a/include/linux/platform_data/exynos_thermal.h
>> +++ b/include/linux/platform_data/exynos_thermal.h
>> @@ -31,6 +31,17 @@ enum calibration_type {
>>         TYPE_NONE,
>>   };
>>
>> +enum calibration_mode {
>> +       SW_MODE,
>> +       HW_MODE,
>> +};
>> +
>> +enum trigger_type {
>> +       ACTIVE,
>> +       CRITICAL,
>> +       HW_TRIP,
>> +};
>> +
>>   enum soc_type {
>>         SOC_ARCH_EXYNOS4210 = 1,
>>         SOC_ARCH_EXYNOS,
>> @@ -71,18 +82,9 @@ struct freq_clip_table {
>>    *    3: temperature for trigger_level3 interrupt
>>    *       condition for trigger_level3 interrupt:
>>    *            current temperature > threshold + trigger_levels[3]
>> - * @trigger_level0_en:
>> + * @trigger_enable[]: array to denote which trigger levels are enabled.
>>    *    1 = enable trigger_level0 interrupt,
>>    *    0 = disable trigger_level0 interrupt
>> - * @trigger_level1_en:
>> - *     1 = enable trigger_level1 interrupt,
>> - *     0 = disable trigger_level1 interrupt
>> - * @trigger_level2_en:
>> - *     1 = enable trigger_level2 interrupt,
>> - *     0 = disable trigger_level2 interrupt
>> - * @trigger_level3_en:
>> - *     1 = enable trigger_level3 interrupt,
>> - *     0 = disable trigger_level3 interrupt
>>    * @gain: gain of amplifier in the positive-TC generator block
>>    *    0 <= gain <= 15
>>    * @reference_voltage: reference voltage of amplifier
>> @@ -93,6 +95,7 @@ struct freq_clip_table {
>>    * @type: determines the type of SOC
>>    * @efuse_value: platform defined fuse value
>>    * @cal_type: calibration type for temperature
>> + * @cal_mode: calibration mode for temperature
>
>
> How about trigger_type?
will add. Thanks for the detailed review.
>
>>    * @freq_clip_table: Table representing frequency reduction percentage.
>>    * @freq_tab_count: Count of the above table as frequency reduction may
>>    *    applicable to only some of the trigger levels.
>> @@ -103,18 +106,15 @@ struct exynos_tmu_platform_data {
>>         u8 threshold;
>>         u8 threshold_falling;
>>         u8 trigger_levels[MAX_TRIP];
>> -       bool trigger_level0_en;
>> -       bool trigger_level1_en;
>> -       bool trigger_level2_en;
>> -       bool trigger_level3_en;
>> -       bool trigger_level4_en;
>> -
>> +       enum trigger_type trigger_type[MAX_TRIP];
>> +       bool trigger_enable[MAX_TRIP];
>>         u8 gain;
>>         u8 reference_voltage;
>>         u8 noise_cancel_mode;
>>         u32 efuse_value;
>>
>>         enum calibration_type cal_type;
>> +       enum calibration_mode cal_mode;
>>         enum soc_type type;
>>         struct freq_clip_table freq_tab[MAX_TRIP];
>>         unsigned int freq_tab_count;
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos4210_thermal.c b/drivers/thermal/samsung/exynos4210_thermal.c
index 09ea8c8..58d16ac 100644
--- a/drivers/thermal/samsung/exynos4210_thermal.c
+++ b/drivers/thermal/samsung/exynos4210_thermal.c
@@ -276,10 +276,10 @@  static void exynos_tmu_control(struct platform_device *pdev, bool on)
 
 	if (on) {
 		con |= EXYNOS_TMU_CORE_ON;
-		interrupt_en = pdata->trigger_level3_en << 12 |
-			pdata->trigger_level2_en << 8 |
-			pdata->trigger_level1_en << 4 |
-			pdata->trigger_level0_en;
+		interrupt_en = pdata->trigger_enable[3] << 12 |
+			pdata->trigger_enable[2] << 8 |
+			pdata->trigger_enable[1] << 4 |
+			pdata->trigger_enable[0];
 		if (pdata->threshold_falling)
 			interrupt_en |= interrupt_en << 16;
 	} else {
@@ -394,10 +394,10 @@  static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
 	.trigger_levels[0] = 5,
 	.trigger_levels[1] = 20,
 	.trigger_levels[2] = 30,
-	.trigger_level0_en = 1,
-	.trigger_level1_en = 1,
-	.trigger_level2_en = 1,
-	.trigger_level3_en = 0,
+	.trigger_enable[0] = 1,
+	.trigger_enable[1] = 1,
+	.trigger_enable[2] = 1,
+	.trigger_enable[3] = 0,
 	.gain = 15,
 	.reference_voltage = 7,
 	.cal_type = TYPE_ONE_POINT_TRIMMING,
@@ -423,10 +423,10 @@  static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
 	.trigger_levels[0] = 85,
 	.trigger_levels[1] = 103,
 	.trigger_levels[2] = 110,
-	.trigger_level0_en = 1,
-	.trigger_level1_en = 1,
-	.trigger_level2_en = 1,
-	.trigger_level3_en = 0,
+	.trigger_enable[0] = 1,
+	.trigger_enable[1] = 1,
+	.trigger_enable[2] = 1,
+	.trigger_enable[3] = 0,
 	.gain = 8,
 	.reference_voltage = 16,
 	.noise_cancel_mode = 4,
@@ -566,9 +566,9 @@  static int exynos_tmu_probe(struct platform_device *pdev)
 
 	/* Register the sensor with thermal management interface */
 	(&exynos_sensor_conf)->driver_data = data;
-	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
-			pdata->trigger_level1_en + pdata->trigger_level2_en +
-			pdata->trigger_level3_en;
+	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
+			pdata->trigger_enable[1] + pdata->trigger_enable[2] +
+			pdata->trigger_enable[3];
 
 	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
 		exynos_sensor_conf.trip_data.trip_val[i] =
diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h
index 893b758..1090f48 100644
--- a/include/linux/platform_data/exynos_thermal.h
+++ b/include/linux/platform_data/exynos_thermal.h
@@ -31,6 +31,17 @@  enum calibration_type {
 	TYPE_NONE,
 };
 
+enum calibration_mode {
+	SW_MODE,
+	HW_MODE,
+};
+
+enum trigger_type {
+	ACTIVE,
+	CRITICAL,
+	HW_TRIP,
+};
+
 enum soc_type {
 	SOC_ARCH_EXYNOS4210 = 1,
 	SOC_ARCH_EXYNOS,
@@ -71,18 +82,9 @@  struct freq_clip_table {
  *	3: temperature for trigger_level3 interrupt
  *	   condition for trigger_level3 interrupt:
  *		current temperature > threshold + trigger_levels[3]
- * @trigger_level0_en:
+ * @trigger_enable[]: array to denote which trigger levels are enabled.
  *	1 = enable trigger_level0 interrupt,
  *	0 = disable trigger_level0 interrupt
- * @trigger_level1_en:
- *	1 = enable trigger_level1 interrupt,
- *	0 = disable trigger_level1 interrupt
- * @trigger_level2_en:
- *	1 = enable trigger_level2 interrupt,
- *	0 = disable trigger_level2 interrupt
- * @trigger_level3_en:
- *	1 = enable trigger_level3 interrupt,
- *	0 = disable trigger_level3 interrupt
  * @gain: gain of amplifier in the positive-TC generator block
  *	0 <= gain <= 15
  * @reference_voltage: reference voltage of amplifier
@@ -93,6 +95,7 @@  struct freq_clip_table {
  * @type: determines the type of SOC
  * @efuse_value: platform defined fuse value
  * @cal_type: calibration type for temperature
+ * @cal_mode: calibration mode for temperature
  * @freq_clip_table: Table representing frequency reduction percentage.
  * @freq_tab_count: Count of the above table as frequency reduction may
  *	applicable to only some of the trigger levels.
@@ -103,18 +106,15 @@  struct exynos_tmu_platform_data {
 	u8 threshold;
 	u8 threshold_falling;
 	u8 trigger_levels[MAX_TRIP];
-	bool trigger_level0_en;
-	bool trigger_level1_en;
-	bool trigger_level2_en;
-	bool trigger_level3_en;
-	bool trigger_level4_en;
-
+	enum trigger_type trigger_type[MAX_TRIP];
+	bool trigger_enable[MAX_TRIP];
 	u8 gain;
 	u8 reference_voltage;
 	u8 noise_cancel_mode;
 	u32 efuse_value;
 
 	enum calibration_type cal_type;
+	enum calibration_mode cal_mode;
 	enum soc_type type;
 	struct freq_clip_table freq_tab[MAX_TRIP];
 	unsigned int freq_tab_count;