| Message ID | 1370272196-4346-2-git-send-email-yadi.brar@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Yadwinder, On Mon, Jun 3, 2013 at 8:09 AM, Yadwinder Singh Brar <yadi.brar@samsung.com> wrote: > This patch unifies clk strutures used for PLL35xx & PLL36xx and uses clk->base > instead of directly using clk->con0, so that possible common code can be > factored out. > It also introdues common pll_[readl/writel] macros for the users of common > samsung_clk_pll struct. > > Reviewed-by: Tomasz Figa <t.figa@samsung.com> > Reviewed-by: Doug Anderson <dianders@chromium.org> > Tested-by: Doug Anderson <dianders@chromium.org> > Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> > --- > drivers/clk/samsung/clk-exynos4.c | 10 ++++-- > drivers/clk/samsung/clk-exynos5250.c | 14 ++++---- > drivers/clk/samsung/clk-pll.c | 54 ++++++++++++++++++--------------- > drivers/clk/samsung/clk-pll.h | 4 +- > 4 files changed, 44 insertions(+), 38 deletions(-) So. We just found that this type of solution doesn't work on exynos5420, since the LOCK and CON registers aren't always 0x100 away from each other. Perhaps you can adjust to use a solution like Andrew proposed in <https://gerrit.chromium.org/gerrit/#/c/58411/>? That way we can avoid some churn of changing this code twice. The number of parameters to the register PLL function is starting to get unwieldy. At some point we'll probably want to pass in a structure. I wonder if now would be the time? Certainly it would be easier to handle changes to the code without touching all of the exynos variants... Thanks! -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Yadwinder, On Wed, Jun 12, 2013 at 1:33 PM, Doug Anderson <dianders@chromium.org> wrote: > So. We just found that this type of solution doesn't work on > exynos5420, since the LOCK and CON registers aren't always 0x100 away > from each other. Perhaps you can adjust to use a solution like Andrew > proposed in <https://gerrit.chromium.org/gerrit/#/c/58411/>? That way > we can avoid some churn of changing this code twice. > > The number of parameters to the register PLL function is starting to > get unwieldy. At some point we'll probably want to pass in a > structure. I wonder if now would be the time? Certainly it would be > easier to handle changes to the code without touching all of the > exynos variants... It's also probably wise to preemptively rebase atop <https://patchwork.kernel.org/patch/2704761/> since that looks like it will land in 3.10 and your series is destined for the release after. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Wednesday 12 of June 2013 13:33:50 Doug Anderson wrote: > Yadwinder, > > On Mon, Jun 3, 2013 at 8:09 AM, Yadwinder Singh Brar > > <yadi.brar@samsung.com> wrote: > > This patch unifies clk strutures used for PLL35xx & PLL36xx and uses > > clk->base instead of directly using clk->con0, so that possible > > common code can be factored out. > > It also introdues common pll_[readl/writel] macros for the users of > > common samsung_clk_pll struct. > > > > Reviewed-by: Tomasz Figa <t.figa@samsung.com> > > Reviewed-by: Doug Anderson <dianders@chromium.org> > > Tested-by: Doug Anderson <dianders@chromium.org> > > Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> > > --- > > > > drivers/clk/samsung/clk-exynos4.c | 10 ++++-- > > drivers/clk/samsung/clk-exynos5250.c | 14 ++++---- > > drivers/clk/samsung/clk-pll.c | 54 > > ++++++++++++++++++--------------- drivers/clk/samsung/clk-pll.h > > | 4 +- > > 4 files changed, 44 insertions(+), 38 deletions(-) > > So. We just found that this type of solution doesn't work on > exynos5420, since the LOCK and CON registers aren't always 0x100 away > from each other. Oops, this is what I've been afraid of, ever since we assumed this first time in our internal patches. > Perhaps you can adjust to use a solution like Andrew > proposed in <https://gerrit.chromium.org/gerrit/#/c/58411/>? That way > we can avoid some churn of changing this code twice. > > The number of parameters to the register PLL function is starting to > get unwieldy. At some point we'll probably want to pass in a > structure. I wonder if now would be the time? Certainly it would be > easier to handle changes to the code without touching all of the > exynos variants... Hmm, if done properly, it could simplify PLL registration in SoC clock initialization code a lot. I'm not sure if this is really the best solution (feel free to suggest anything better), but we could put PLLs in an array, like other clocks, e.g. ... exynos4210_pll_clks[] = { CLK_PLL45XX(...), CLK_PLL45XX(...), CLK_PLL46XX(...), CLK_PLL46XX(...), }; and then just call a helper like samsung_clk_register_pll(exynos4210_pll_clks, ARRAY_SIZE(exynos4210_pll_clks)); Best regards, Tomasz > Thanks! > > -Doug > -- > To unsubscribe from this list: send the line "unsubscribe > linux-samsung-soc" in the body of a message to > majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Tomasz, On Wed, Jun 12, 2013 at 2:19 PM, Tomasz Figa <tomasz.figa@gmail.com> wrote: > Hmm, if done properly, it could simplify PLL registration in SoC clock > initialization code a lot. > > I'm not sure if this is really the best solution (feel free to suggest > anything better), but we could put PLLs in an array, like other clocks, > e.g. > > ... exynos4210_pll_clks[] = { > CLK_PLL45XX(...), > CLK_PLL45XX(...), > CLK_PLL46XX(...), > CLK_PLL46XX(...), > }; > > and then just call a helper like > > samsung_clk_register_pll(exynos4210_pll_clks, > ARRAY_SIZE(exynos4210_pll_clks)); Something like that looks like what I was thinking. I'd have to see it actually coded up to see if there's something I'm missing that would prevent us from doing that, but I don't see anything. -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Doug, >> Hmm, if done properly, it could simplify PLL registration in SoC clock >> initialization code a lot. >> >> I'm not sure if this is really the best solution (feel free to suggest >> anything better), but we could put PLLs in an array, like other clocks, >> e.g. >> >> ... exynos4210_pll_clks[] = { >> CLK_PLL45XX(...), >> CLK_PLL45XX(...), >> CLK_PLL46XX(...), >> CLK_PLL46XX(...), >> }; >> >> and then just call a helper like >> >> samsung_clk_register_pll(exynos4210_pll_clks, >> ARRAY_SIZE(exynos4210_pll_clks)); > > Something like that looks like what I was thinking. I'd have to see > it actually coded up to see if there's something I'm missing that > would prevent us from doing that, but I don't see anything. The only issue I see with this is that we may only want to register a rate table with a PLL only if fin_pll is running at a certain rate. On 5250 and 5420, for example, we have EPLL and VPLL rate tables that should only be registered if fin_pll is 24Mhz. We may have to register those separately, but this approach seems fine otherwise. -Andrew -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index addc738..ba33bc6 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -97,12 +97,14 @@ #define GATE_IP_PERIL 0xc950 #define E4210_GATE_IP_PERIR 0xc960 #define GATE_BLOCK 0xc970 +#define E4X12_MPLL_LOCK 0x10008 #define E4X12_MPLL_CON0 0x10108 #define SRC_DMC 0x10200 #define SRC_MASK_DMC 0x10300 #define DIV_DMC0 0x10500 #define DIV_DMC1 0x10504 #define GATE_IP_DMC 0x10900 +#define APLL_LOCK 0x14000 #define APLL_CON0 0x14100 #define E4210_MPLL_CON0 0x14108 #define SRC_CPU 0x14200 @@ -1026,13 +1028,13 @@ void __init exynos4_clk_init(struct device_node *np, enum exynos4_soc exynos4_so reg_base + VPLL_CON0, pll_4650c); } else { apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll", - reg_base + APLL_CON0); + reg_base + APLL_LOCK); mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll", - reg_base + E4X12_MPLL_CON0); + reg_base + E4X12_MPLL_LOCK); epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll", - reg_base + EPLL_CON0); + reg_base + EPLL_LOCK); vpll = samsung_clk_register_pll36xx("fout_vpll", "fin_pll", - reg_base + VPLL_CON0); + reg_base + VPLL_LOCK); } samsung_clk_add_lookup(apll, fout_apll); diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 5c97e75..687b580 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -491,19 +491,19 @@ void __init exynos5250_clk_init(struct device_node *np) ext_clk_match); apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll", - reg_base + 0x100); + reg_base); mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll", - reg_base + 0x4100); + reg_base + 0x4000); bpll = samsung_clk_register_pll35xx("fout_bpll", "fin_pll", - reg_base + 0x20110); + reg_base + 0x20010); gpll = samsung_clk_register_pll35xx("fout_gpll", "fin_pll", - reg_base + 0x10150); + reg_base + 0x10050); cpll = samsung_clk_register_pll35xx("fout_cpll", "fin_pll", - reg_base + 0x10120); + reg_base + 0x10020); epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll", - reg_base + 0x10130); + reg_base + 0x10030); vpll = samsung_clk_register_pll36xx("fout_vpll", "mout_vpllsrc", - reg_base + 0x10140); + reg_base + 0x10040); samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks, ARRAY_SIZE(exynos5250_fixed_rate_clks)); diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 89135f6..a7d8ad9 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -13,9 +13,24 @@ #include "clk.h" #include "clk-pll.h" +struct samsung_clk_pll { + struct clk_hw hw; + const void __iomem *base; +}; + +#define to_clk_pll(_hw) container_of(_hw, struct samsung_clk_pll, hw) + +#define pll_readl(pll, offset) \ + __raw_readl((void __iomem *)(pll->base + (offset))); +#define pll_writel(pll, val, offset) \ + __raw_writel(val, (void __iomem *)(pll->base + (offset))); + /* * PLL35xx Clock Type */ +#define PLL35XX_LOCK_OFFSET (0x0) +#define PLL35XX_CON0_OFFSET (0x100) +#define PLL35XX_CON1_OFFSET (0x104) #define PLL35XX_MDIV_MASK (0x3FF) #define PLL35XX_PDIV_MASK (0x3F) @@ -24,21 +39,14 @@ #define PLL35XX_PDIV_SHIFT (8) #define PLL35XX_SDIV_SHIFT (0) -struct samsung_clk_pll35xx { - struct clk_hw hw; - const void __iomem *con_reg; -}; - -#define to_clk_pll35xx(_hw) container_of(_hw, struct samsung_clk_pll35xx, hw) - static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { - struct samsung_clk_pll35xx *pll = to_clk_pll35xx(hw); + struct samsung_clk_pll *pll = to_clk_pll(hw); u32 mdiv, pdiv, sdiv, pll_con; u64 fvco = parent_rate; - pll_con = __raw_readl(pll->con_reg); + pll_con = pll_readl(pll, PLL35XX_CON0_OFFSET); mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; @@ -54,9 +62,9 @@ static const struct clk_ops samsung_pll35xx_clk_ops = { }; struct clk * __init samsung_clk_register_pll35xx(const char *name, - const char *pname, const void __iomem *con_reg) + const char *pname, const void __iomem *base) { - struct samsung_clk_pll35xx *pll; + struct samsung_clk_pll *pll; struct clk *clk; struct clk_init_data init; @@ -73,7 +81,7 @@ struct clk * __init samsung_clk_register_pll35xx(const char *name, init.num_parents = 1; pll->hw.init = &init; - pll->con_reg = con_reg; + pll->base = base; clk = clk_register(NULL, &pll->hw); if (IS_ERR(clk)) { @@ -91,6 +99,9 @@ struct clk * __init samsung_clk_register_pll35xx(const char *name, /* * PLL36xx Clock Type */ +#define PLL36XX_LOCK_OFFSET (0x0) +#define PLL36XX_CON0_OFFSET (0x100) +#define PLL36XX_CON1_OFFSET (0x104) #define PLL36XX_KDIV_MASK (0xFFFF) #define PLL36XX_MDIV_MASK (0x1FF) @@ -100,22 +111,15 @@ struct clk * __init samsung_clk_register_pll35xx(const char *name, #define PLL36XX_PDIV_SHIFT (8) #define PLL36XX_SDIV_SHIFT (0) -struct samsung_clk_pll36xx { - struct clk_hw hw; - const void __iomem *con_reg; -}; - -#define to_clk_pll36xx(_hw) container_of(_hw, struct samsung_clk_pll36xx, hw) - static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { - struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw); + struct samsung_clk_pll *pll = to_clk_pll(hw); u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1; u64 fvco = parent_rate; - pll_con0 = __raw_readl(pll->con_reg); - pll_con1 = __raw_readl(pll->con_reg + 4); + pll_con0 = pll_readl(pll, PLL36XX_CON0_OFFSET); + pll_con1 = pll_readl(pll, PLL36XX_CON1_OFFSET); mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; @@ -133,9 +137,9 @@ static const struct clk_ops samsung_pll36xx_clk_ops = { }; struct clk * __init samsung_clk_register_pll36xx(const char *name, - const char *pname, const void __iomem *con_reg) + const char *pname, const void __iomem *base) { - struct samsung_clk_pll36xx *pll; + struct samsung_clk_pll *pll; struct clk *clk; struct clk_init_data init; @@ -152,7 +156,7 @@ struct clk * __init samsung_clk_register_pll36xx(const char *name, init.num_parents = 1; pll->hw.init = &init; - pll->con_reg = con_reg; + pll->base = base; clk = clk_register(NULL, &pll->hw); if (IS_ERR(clk)) { diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h index f33786e..1329522 100644 --- a/drivers/clk/samsung/clk-pll.h +++ b/drivers/clk/samsung/clk-pll.h @@ -25,9 +25,9 @@ enum pll46xx_type { }; extern struct clk * __init samsung_clk_register_pll35xx(const char *name, - const char *pname, const void __iomem *con_reg); + const char *pname, const void __iomem *base); extern struct clk * __init samsung_clk_register_pll36xx(const char *name, - const char *pname, const void __iomem *con_reg); + const char *pname, const void __iomem *base); extern struct clk * __init samsung_clk_register_pll45xx(const char *name, const char *pname, const void __iomem *con_reg, enum pll45xx_type type);