| Message ID | 1370959891-8923-10-git-send-email-rahul.sharma@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, 11 Jun 2013 19:41:31 +0530, Rahul Sharma <rahul.sharma@samsung.com> wrote: > Update device tree binding documentation for hdmi subsystem with the > clock information, phy property information and compatible strings for > exynos5420. > > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Binding looks reasonable to me. I'll leave it to the video maintainers to say whether or not it is covers the right amount of configuration data. g. > --- > .../devicetree/bindings/video/exynos_hdmi.txt | 19 +++++++++++++++++++ > .../devicetree/bindings/video/exynos_hdmiphy.txt | 10 ++++++++-- > .../devicetree/bindings/video/exynos_mixer.txt | 7 +++++++ > 3 files changed, 34 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt > index 2ac01ca..e3c5853 100644 > --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt > +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt > @@ -4,6 +4,7 @@ Required properties: > - compatible: value should be one among the following: > 1) "samsung,exynos4210-hdmi" > 2) "samsung,exynos4212-hdmi" > + 3) "samsung,exynos5420-hdmi" > - reg: physical base address of the hdmi and length of memory mapped > region. > - interrupts: interrupt number to the cpu. > @@ -13,6 +14,20 @@ Required properties: > c) pin function mode. > d) optional flags and pull up/down. > e) drive strength. > +- clocks: list of clock IDs from SoC clock driver. > + a) hdmi: It is required for gate operation on aclk_200_disp1 clock > + which clocks the display1 block. > + b) sclk_hdmi: It is required for gate operation on sclk_hdmi clock > + which clocks hdmi IP. > + c) sclk_pixel: Parent for mux mout_hdmi. > + d) sclk_hdmiphy: Parent for mux mout_hdmi. > + e) mout_hdmi: It is required by the driver to switch between the 2 > + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable > + after configuration, parent is set to sclk_hdmiphy else > + sclk_pixel. > +- clock-names: aliases as per driver requirements for above clock IDs: > + "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". > +- phy: this property holds the phandle for hdmiphy node. > > Example: > > @@ -21,4 +36,8 @@ Example: > reg = <0x14530000 0x100000>; > interrupts = <0 95 0>; > hpd-gpio = <&gpx3 7 0xf 1 3>; > + clocks = <&clock 344>, <&clock 136>, <&clock 137>, > + <&clock 157>, <&clock 1024>; > + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", > + "sclk_hdmiphy", "mout_hdmi"; > }; > diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt > index fb688a6..e2b12ed 100644 > --- a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt > +++ b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt > @@ -1,8 +1,14 @@ > Device-Tree bindings for hdmiphy driver > > Required properties: > -- compatible: value should be "samsung,exynos4210-hdmiphy". > -- reg: I2C address of the hdmiphy device. > +- compatible: value should be one among the following > + 1) Samsung,exynos4210-hdmiphy". > + 2) Samsung,exynos5420-hdmiphy". > + > +- reg: it holds the physical address infomration for the hdmiphy device. > + If it is a i2c device, reg holds the I2C address of the phy. For > + platform bus mapped phy, reg property holds physical address as > + well as size of the register region. > > Example: > > diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt > index a8b063f..38e4e5c 100644 > --- a/Documentation/devicetree/bindings/video/exynos_mixer.txt > +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt > @@ -4,10 +4,15 @@ Required properties: > - compatible: value should be: > 1) "samsung,exynos4210-mixer" > 2) "samsung,exynos5250-mixer" > + 3) "samsung,exynos5420-mixer" > > - reg: physical base address of the mixer and length of memory mapped > region. > - interrupts: interrupt number to the cpu. > +- clocks: list of clock IDs from SoC clock driver. > + a) mixer: It is required for gate operation on aclk_200_disp1 clock > + which clocks the display1 block. > + b) sclk_hdmi: Parent for mux mout_mixer. > > Example: > > @@ -15,4 +20,6 @@ Example: > compatible = "samsung,exynos5250-mixer"; > reg = <0x14450000 0x10000>; > interrupts = <0 94 0>; > + clocks = <&clock 343>, <&clock 136>; > + clock-names = "mixer", "sclk_hdmi"; > }; > -- > 1.7.10.4 > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/devicetree-discuss
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt index 2ac01ca..e3c5853 100644 --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt @@ -4,6 +4,7 @@ Required properties: - compatible: value should be one among the following: 1) "samsung,exynos4210-hdmi" 2) "samsung,exynos4212-hdmi" + 3) "samsung,exynos5420-hdmi" - reg: physical base address of the hdmi and length of memory mapped region. - interrupts: interrupt number to the cpu. @@ -13,6 +14,20 @@ Required properties: c) pin function mode. d) optional flags and pull up/down. e) drive strength. +- clocks: list of clock IDs from SoC clock driver. + a) hdmi: It is required for gate operation on aclk_200_disp1 clock + which clocks the display1 block. + b) sclk_hdmi: It is required for gate operation on sclk_hdmi clock + which clocks hdmi IP. + c) sclk_pixel: Parent for mux mout_hdmi. + d) sclk_hdmiphy: Parent for mux mout_hdmi. + e) mout_hdmi: It is required by the driver to switch between the 2 + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable + after configuration, parent is set to sclk_hdmiphy else + sclk_pixel. +- clock-names: aliases as per driver requirements for above clock IDs: + "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". +- phy: this property holds the phandle for hdmiphy node. Example: @@ -21,4 +36,8 @@ Example: reg = <0x14530000 0x100000>; interrupts = <0 95 0>; hpd-gpio = <&gpx3 7 0xf 1 3>; + clocks = <&clock 344>, <&clock 136>, <&clock 137>, + <&clock 157>, <&clock 1024>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "mout_hdmi"; }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt index fb688a6..e2b12ed 100644 --- a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt +++ b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt @@ -1,8 +1,14 @@ Device-Tree bindings for hdmiphy driver Required properties: -- compatible: value should be "samsung,exynos4210-hdmiphy". -- reg: I2C address of the hdmiphy device. +- compatible: value should be one among the following + 1) Samsung,exynos4210-hdmiphy". + 2) Samsung,exynos5420-hdmiphy". + +- reg: it holds the physical address infomration for the hdmiphy device. + If it is a i2c device, reg holds the I2C address of the phy. For + platform bus mapped phy, reg property holds physical address as + well as size of the register region. Example: diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt index a8b063f..38e4e5c 100644 --- a/Documentation/devicetree/bindings/video/exynos_mixer.txt +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt @@ -4,10 +4,15 @@ Required properties: - compatible: value should be: 1) "samsung,exynos4210-mixer" 2) "samsung,exynos5250-mixer" + 3) "samsung,exynos5420-mixer" - reg: physical base address of the mixer and length of memory mapped region. - interrupts: interrupt number to the cpu. +- clocks: list of clock IDs from SoC clock driver. + a) mixer: It is required for gate operation on aclk_200_disp1 clock + which clocks the display1 block. + b) sclk_hdmi: Parent for mux mout_mixer. Example: @@ -15,4 +20,6 @@ Example: compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; + clocks = <&clock 343>, <&clock 136>; + clock-names = "mixer", "sclk_hdmi"; };
Update device tree binding documentation for hdmi subsystem with the clock information, phy property information and compatible strings for exynos5420. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> --- .../devicetree/bindings/video/exynos_hdmi.txt | 19 +++++++++++++++++++ .../devicetree/bindings/video/exynos_hdmiphy.txt | 10 ++++++++-- .../devicetree/bindings/video/exynos_mixer.txt | 7 +++++++ 3 files changed, 34 insertions(+), 2 deletions(-)