diff mbox

[RFC,5/5] ARM: Samsung: Remove MIPI PHY setup code

Message ID 1371231951-1969-6-git-send-email-s.nawrocki@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM
DPHYs so we can remove now unused code at arch/arm/plat-samsung.
In case there is any board file for S5PV210 platforms using MIPI
CSIS/DSIM (not any upstream currently) it should use the generic
PHY API to bind the PHYs to respective PHY consumer drivers.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/mach-exynos/include/mach/regs-pmu.h    |    5 --
 arch/arm/mach-s5pv210/include/mach/regs-clock.h |    4 --
 arch/arm/plat-samsung/Makefile                  |    1 -
 arch/arm/plat-samsung/setup-mipiphy.c           |   60 -----------------------
 4 files changed, 70 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c

Comments

Kim Kukjin June 16, 2013, 8:52 p.m. UTC | #1
On 06/15/13 02:45, Sylwester Nawrocki wrote:
> Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM
> DPHYs so we can remove now unused code at arch/arm/plat-samsung.

If so, sounds good :)

> In case there is any board file for S5PV210 platforms using MIPI
> CSIS/DSIM (not any upstream currently) it should use the generic
> PHY API to bind the PHYs to respective PHY consumer drivers.

To be honest, I didn't test this on boards but if the working is fine, 
please go ahead without RFC.

Thanks,
- Kukjin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
On 06/16/2013 10:52 PM, Kukjin Kim wrote:
> On 06/15/13 02:45, Sylwester Nawrocki wrote:
>> > Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM
>> > DPHYs so we can remove now unused code at arch/arm/plat-samsung.
>
> If so, sounds good :)
> 
>> > In case there is any board file for S5PV210 platforms using MIPI
>> > CSIS/DSIM (not any upstream currently) it should use the generic
>> > PHY API to bind the PHYs to respective PHY consumer drivers.
>
> To be honest, I didn't test this on boards but if the working is fine, 
> please go ahead without RFC.

Thanks for review. I've tested it on Exynos4412 based board, and will
check also on Exynos4210 TRATS before posting the final version.
It seems to work fine, I just won't be able to test on any non-dt
platform (s5pv210), and there is currently no users of MIPI CSIS/DSIM
on s5pv210. Moreover this series depends on the generic PHY API,
perhaps it can be merged for 3.11.

[1] http://www.spinics.net/lists/arm-kernel/msg251232.html

Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index cf40b86..3820e39 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -44,11 +44,6 @@ 
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 032de66..e345584 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -147,10 +147,6 @@ 
 #define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index a23c460..5a15fae 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -41,7 +41,6 @@  obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
deleted file mode 100644
index 66df315..0000000
--- a/arch/arm/plat-samsung/setup-mipiphy.c
+++ /dev/null
@@ -1,60 +0,0 @@ 
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	u32 cfg;
-
-	id = max(0, id);
-	if (id > 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(id);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(int id, bool on)
-{
-	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
-}
-EXPORT_SYMBOL(s5p_csis_phy_enable);
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
-}
-EXPORT_SYMBOL(s5p_dsim_phy_enable);