diff mbox

ARM: dts: Update range for vdd_arm on EXYNOS4412-origen board

Message ID 1371635919-16288-1-git-send-email-tushar.behera@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Tushar Behera June 19, 2013, 9:58 a.m. UTC
EXYNOS4412 cpufreq driver requires the range of vdd_arm regulator to
be from .9v to 1.35v. Since vdd_arm regulator (BUCK2 on S5M8767) has
a supported range of .6v to 1.6v, the constraints are updated to
match the requirement from cpufreq driver.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
 arch/arm/boot/dts/exynos4412-origen.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 7993641..309a583 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -450,8 +450,8 @@ 
 
 				buck2_reg: BUCK2 {
 					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <925000>;
-					regulator-max-microvolt	= <1300000>;
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 					op_mode = <1>; /* Normal Mode */