diff mbox

[RESEND,V7,16/30] thermal: exynos: Make the zone handling use trip information

Message ID 1372160359-14504-1-git-send-email-amit.daniel@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Amit Kachhap June 25, 2013, 11:39 a.m. UTC
This code simplifies the zone handling to use the trip information passed
by the TMU driver and not the hardcoded macros. This also helps in adding
more zone support.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos_thermal_common.c |   67 ++++++++++++++---------
 drivers/thermal/samsung/exynos_thermal_common.h |    3 +-
 drivers/thermal/samsung/exynos_tmu.c            |    5 ++-
 3 files changed, 47 insertions(+), 28 deletions(-)

Comments

Eduardo Valentin June 25, 2013, 1:36 p.m. UTC | #1
On 25-06-2013 07:39, Amit Daniel Kachhap wrote:
> This code simplifies the zone handling to use the trip information passed
> by the TMU driver and not the hardcoded macros. This also helps in adding
> more zone support.
> 
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>

Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>

> ---
>  drivers/thermal/samsung/exynos_thermal_common.c |   67 ++++++++++++++---------
>  drivers/thermal/samsung/exynos_thermal_common.h |    3 +-
>  drivers/thermal/samsung/exynos_tmu.c            |    5 ++-
>  3 files changed, 47 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
> index 99318e5..ecf95da 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.c
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -79,17 +79,24 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
>  static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
>  				 enum thermal_trip_type *type)
>  {
> -	switch (GET_ZONE(trip)) {
> -	case MONITOR_ZONE:
> -	case WARN_ZONE:
> -		*type = THERMAL_TRIP_ACTIVE;
> -		break;
> -	case PANIC_ZONE:
> +	struct exynos_thermal_zone *th_zone = thermal->devdata;
> +	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
> +	int trip_type;
> +
> +	if (trip < 0 || trip >= max_trip)
> +		return -EINVAL;
> +
> +	trip_type = th_zone->sensor_conf->trip_data.trip_type[trip];
> +
> +	if (trip_type == SW_TRIP)
>  		*type = THERMAL_TRIP_CRITICAL;
> -		break;
> -	default:
> +	else if (trip_type == THROTTLE_ACTIVE)
> +		*type = THERMAL_TRIP_ACTIVE;
> +	else if (trip_type == THROTTLE_PASSIVE)
> +		*type = THERMAL_TRIP_PASSIVE;
> +	else
>  		return -EINVAL;
> -	}
> +
>  	return 0;
>  }
>  
> @@ -98,8 +105,9 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>  				unsigned long *temp)
>  {
>  	struct exynos_thermal_zone *th_zone = thermal->devdata;
> +	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>  
> -	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> +	if (trip < 0 || trip >= max_trip)
>  		return -EINVAL;
>  
>  	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> @@ -113,10 +121,10 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>  static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>  				unsigned long *temp)
>  {
> -	int ret;
> -	/* Panic zone */
> -	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> -	return ret;
> +	struct exynos_thermal_zone *th_zone = thermal->devdata;
> +	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
> +	/* Get the temp of highest trip*/
> +	return exynos_get_trip_temp(thermal, max_trip - 1, temp);
>  }
>  
>  /* Bind callback functions for thermal zone */
> @@ -348,19 +356,28 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
>  		return -ENOMEM;
>  
>  	th_zone->sensor_conf = sensor_conf;
> -	cpumask_set_cpu(0, &mask_val);
> -	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> -	if (IS_ERR(th_zone->cool_dev[0])) {
> -		pr_err("Failed to register cpufreq cooling device\n");
> -		ret = -EINVAL;
> -		goto err_unregister;
> +	/*
> +	 * TODO: 1) Handle multiple cooling devices in a thermal zone
> +	 *	 2) Add a flag/name in cooling info to map to specific
> +	 *	 sensor
> +	 */
> +	if (sensor_conf->cooling_data.freq_clip_count > 0) {
> +		cpumask_set_cpu(0, &mask_val);
> +		th_zone->cool_dev[th_zone->cool_dev_size] =
> +					cpufreq_cooling_register(&mask_val);
> +		if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) {
> +			pr_err("Failed to register cpufreq cooling device\n");
> +			ret = -EINVAL;
> +			goto err_unregister;
> +		}
> +		th_zone->cool_dev_size++;
>  	}
> -	th_zone->cool_dev_size++;
>  
> -	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> -			EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
> -			sensor_conf->trip_data.trigger_falling ?
> -			0 : IDLE_INTERVAL);
> +	th_zone->therm_dev = thermal_zone_device_register(
> +			sensor_conf->name, sensor_conf->trip_data.trip_count,
> +			0, th_zone, &exynos_dev_ops, NULL, 0,
> +			sensor_conf->trip_data.trigger_falling ? 0 :
> +			IDLE_INTERVAL);
>  
>  	if (IS_ERR(th_zone->therm_dev)) {
>  		pr_err("Failed to register thermal zone device\n");
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> index 6ca3096..bfcf69e 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -42,8 +42,6 @@
>  #define GET_ZONE(trip) (trip + 2)
>  #define GET_TRIP(zone) (zone - 2)
>  
> -#define EXYNOS_ZONE_COUNT	3
> -
>  enum trigger_type {
>  	THROTTLE_ACTIVE = 1,
>  	THROTTLE_PASSIVE,
> @@ -69,6 +67,7 @@ struct freq_clip_table {
>  
>  struct	thermal_trip_point_conf {
>  	int trip_val[MAX_TRIP_COUNT];
> +	int trip_type[MAX_TRIP_COUNT];
>  	int trip_count;
>  	unsigned char trigger_falling;
>  };
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 40e0cfd..acbd295 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -509,9 +509,12 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  			pdata->trigger_enable[1] + pdata->trigger_enable[2]+
>  			pdata->trigger_enable[3];
>  
> -	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
> +	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) {
>  		exynos_sensor_conf.trip_data.trip_val[i] =
>  			pdata->threshold + pdata->trigger_levels[i];
> +		exynos_sensor_conf.trip_data.trip_type[i] =
> +					pdata->trigger_type[i];
> +	}
>  
>  	exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
>  
>
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
index 99318e5..ecf95da 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.c
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -79,17 +79,24 @@  static int exynos_set_mode(struct thermal_zone_device *thermal,
 static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
 				 enum thermal_trip_type *type)
 {
-	switch (GET_ZONE(trip)) {
-	case MONITOR_ZONE:
-	case WARN_ZONE:
-		*type = THERMAL_TRIP_ACTIVE;
-		break;
-	case PANIC_ZONE:
+	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
+	int trip_type;
+
+	if (trip < 0 || trip >= max_trip)
+		return -EINVAL;
+
+	trip_type = th_zone->sensor_conf->trip_data.trip_type[trip];
+
+	if (trip_type == SW_TRIP)
 		*type = THERMAL_TRIP_CRITICAL;
-		break;
-	default:
+	else if (trip_type == THROTTLE_ACTIVE)
+		*type = THERMAL_TRIP_ACTIVE;
+	else if (trip_type == THROTTLE_PASSIVE)
+		*type = THERMAL_TRIP_PASSIVE;
+	else
 		return -EINVAL;
-	}
+
 	return 0;
 }
 
@@ -98,8 +105,9 @@  static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
 				unsigned long *temp)
 {
 	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
 
-	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
+	if (trip < 0 || trip >= max_trip)
 		return -EINVAL;
 
 	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
@@ -113,10 +121,10 @@  static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
 static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
 				unsigned long *temp)
 {
-	int ret;
-	/* Panic zone */
-	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
-	return ret;
+	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
+	/* Get the temp of highest trip*/
+	return exynos_get_trip_temp(thermal, max_trip - 1, temp);
 }
 
 /* Bind callback functions for thermal zone */
@@ -348,19 +356,28 @@  int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 		return -ENOMEM;
 
 	th_zone->sensor_conf = sensor_conf;
-	cpumask_set_cpu(0, &mask_val);
-	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
-	if (IS_ERR(th_zone->cool_dev[0])) {
-		pr_err("Failed to register cpufreq cooling device\n");
-		ret = -EINVAL;
-		goto err_unregister;
+	/*
+	 * TODO: 1) Handle multiple cooling devices in a thermal zone
+	 *	 2) Add a flag/name in cooling info to map to specific
+	 *	 sensor
+	 */
+	if (sensor_conf->cooling_data.freq_clip_count > 0) {
+		cpumask_set_cpu(0, &mask_val);
+		th_zone->cool_dev[th_zone->cool_dev_size] =
+					cpufreq_cooling_register(&mask_val);
+		if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) {
+			pr_err("Failed to register cpufreq cooling device\n");
+			ret = -EINVAL;
+			goto err_unregister;
+		}
+		th_zone->cool_dev_size++;
 	}
-	th_zone->cool_dev_size++;
 
-	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
-			EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
-			sensor_conf->trip_data.trigger_falling ?
-			0 : IDLE_INTERVAL);
+	th_zone->therm_dev = thermal_zone_device_register(
+			sensor_conf->name, sensor_conf->trip_data.trip_count,
+			0, th_zone, &exynos_dev_ops, NULL, 0,
+			sensor_conf->trip_data.trigger_falling ? 0 :
+			IDLE_INTERVAL);
 
 	if (IS_ERR(th_zone->therm_dev)) {
 		pr_err("Failed to register thermal zone device\n");
diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
index 6ca3096..bfcf69e 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.h
+++ b/drivers/thermal/samsung/exynos_thermal_common.h
@@ -42,8 +42,6 @@ 
 #define GET_ZONE(trip) (trip + 2)
 #define GET_TRIP(zone) (zone - 2)
 
-#define EXYNOS_ZONE_COUNT	3
-
 enum trigger_type {
 	THROTTLE_ACTIVE = 1,
 	THROTTLE_PASSIVE,
@@ -69,6 +67,7 @@  struct freq_clip_table {
 
 struct	thermal_trip_point_conf {
 	int trip_val[MAX_TRIP_COUNT];
+	int trip_type[MAX_TRIP_COUNT];
 	int trip_count;
 	unsigned char trigger_falling;
 };
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 40e0cfd..acbd295 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -509,9 +509,12 @@  static int exynos_tmu_probe(struct platform_device *pdev)
 			pdata->trigger_enable[1] + pdata->trigger_enable[2]+
 			pdata->trigger_enable[3];
 
-	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
+	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) {
 		exynos_sensor_conf.trip_data.trip_val[i] =
 			pdata->threshold + pdata->trigger_levels[i];
+		exynos_sensor_conf.trip_data.trip_type[i] =
+					pdata->trigger_type[i];
+	}
 
 	exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;