| Message ID | 1374278673-25615-4-git-send-email-tomasz.figa@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 07/20/2013 02:04 AM, Tomasz Figa wrote: > PWM channel 4 has its autoreload bit located at different position. This > patch fixes the driver to account for that. > > This fixes a problem with the clocksource hanging after it overflows because > it is not reloaded any more. > > Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> > --- > drivers/clocksource/samsung_pwm_timer.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c > index 3fa5b07..e238fb0 100644 > --- a/drivers/clocksource/samsung_pwm_timer.c > +++ b/drivers/clocksource/samsung_pwm_timer.c > @@ -47,7 +47,8 @@ > #define TCON_START(chan) (1 << (4 * (chan) + 0)) > #define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1)) > #define TCON_INVERT(chan) (1 << (4 * (chan) + 2)) > -#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) > +#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) \ > + + (((chan) < 5) ? 3 : 2))) This macro is not readable. Please, fix it up with a comment please. > > DEFINE_SPINLOCK(samsung_pwm_lock); > EXPORT_SYMBOL(samsung_pwm_lock); >
On Monday 22 of July 2013 05:50:09 Daniel Lezcano wrote: > On 07/20/2013 02:04 AM, Tomasz Figa wrote: > > PWM channel 4 has its autoreload bit located at different position. > > This patch fixes the driver to account for that. > > > > This fixes a problem with the clocksource hanging after it overflows > > because it is not reloaded any more. > > > > Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> > > --- > > > > drivers/clocksource/samsung_pwm_timer.c | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/clocksource/samsung_pwm_timer.c > > b/drivers/clocksource/samsung_pwm_timer.c index 3fa5b07..e238fb0 > > 100644 > > --- a/drivers/clocksource/samsung_pwm_timer.c > > +++ b/drivers/clocksource/samsung_pwm_timer.c > > @@ -47,7 +47,8 @@ > > > > #define TCON_START(chan) (1 << (4 * (chan) + 0)) > > #define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1)) > > #define TCON_INVERT(chan) (1 << (4 * (chan) + 2)) > > > > -#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) > > +#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) \ > > + + (((chan) < 5) ? 3 : 2))) > > This macro is not readable. Please, fix it up with a comment please. /* * Channel 4 (logically 5 in TCON register) has different position * of autoreload bit. */ #define _TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) #define _TCON_AUTORELOAD4(chan) (1 << (4 * (chan) + 2)) #define TCON_AUTORELOAD(chan) ((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) What do you think? Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/22/2013 09:43 AM, Tomasz Figa wrote: > On Monday 22 of July 2013 05:50:09 Daniel Lezcano wrote: >> On 07/20/2013 02:04 AM, Tomasz Figa wrote: >>> PWM channel 4 has its autoreload bit located at different position. >>> This patch fixes the driver to account for that. >>> >>> This fixes a problem with the clocksource hanging after it overflows >>> because it is not reloaded any more. >>> >>> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> >>> --- >>> >>> drivers/clocksource/samsung_pwm_timer.c | 3 ++- >>> 1 file changed, 2 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/clocksource/samsung_pwm_timer.c >>> b/drivers/clocksource/samsung_pwm_timer.c index 3fa5b07..e238fb0 >>> 100644 >>> --- a/drivers/clocksource/samsung_pwm_timer.c >>> +++ b/drivers/clocksource/samsung_pwm_timer.c >>> @@ -47,7 +47,8 @@ >>> >>> #define TCON_START(chan) (1 << (4 * (chan) + 0)) >>> #define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1)) >>> #define TCON_INVERT(chan) (1 << (4 * (chan) + 2)) >>> >>> -#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) >>> +#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) \ >>> + + (((chan) < 5) ? 3 : 2))) >> >> This macro is not readable. Please, fix it up with a comment please. > > /* > * Channel 4 (logically 5 in TCON register) has different position > * of autoreload bit. > */ > #define _TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) > #define _TCON_AUTORELOAD4(chan) (1 << (4 * (chan) + 2)) > #define TCON_AUTORELOAD(chan) ((chan < 5) ? > _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) > > What do you think? I don't get the arithmetic here and the code is poor in comment. A nice comment would valuable here. May be you can replace 1 << bla by BIT(bla) ?
On Monday 22 of July 2013 22:56:44 Daniel Lezcano wrote: > On 07/22/2013 09:43 AM, Tomasz Figa wrote: > > On Monday 22 of July 2013 05:50:09 Daniel Lezcano wrote: > >> On 07/20/2013 02:04 AM, Tomasz Figa wrote: > >>> PWM channel 4 has its autoreload bit located at different position. > >>> This patch fixes the driver to account for that. > >>> > >>> This fixes a problem with the clocksource hanging after it overflows > >>> because it is not reloaded any more. > >>> > >>> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> > >>> --- > >>> > >>> drivers/clocksource/samsung_pwm_timer.c | 3 ++- > >>> 1 file changed, 2 insertions(+), 1 deletion(-) > >>> > >>> diff --git a/drivers/clocksource/samsung_pwm_timer.c > >>> b/drivers/clocksource/samsung_pwm_timer.c index 3fa5b07..e238fb0 > >>> 100644 > >>> --- a/drivers/clocksource/samsung_pwm_timer.c > >>> +++ b/drivers/clocksource/samsung_pwm_timer.c > >>> @@ -47,7 +47,8 @@ > >>> > >>> #define TCON_START(chan) (1 << (4 * (chan) + 0)) > >>> #define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1)) > >>> #define TCON_INVERT(chan) (1 << (4 * (chan) + 2)) > >>> > >>> -#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) > >>> +#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) \ > >>> + + (((chan) < 5) ? 3 : 2))) > >> > >> This macro is not readable. Please, fix it up with a comment please. > > > > /* > > > > * Channel 4 (logically 5 in TCON register) has different position > > * of autoreload bit. > > */ > > > > #define _TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) > > #define _TCON_AUTORELOAD4(chan) (1 << (4 * (chan) + 2)) > > #define TCON_AUTORELOAD(chan) ((chan < 5) ? > > > > _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) > > > > What do you think? > > I don't get the arithmetic here and the code is poor in comment. A nice > comment would valuable here. Each channel occupies 4 bits in TCON register, but there is a gap of 4 bits after channel 0. In addition for channel 4 the location of autoreload bit in its set of bits is 2 as opposed to 3 for other channels. Here's the layout of the register, for reference: Timer 4 Auto Reload on/off [22] Timer 4 Manual Update [21] Timer 4 Start/Stop [20] Timer 3 Auto Reload on/off [19] Reserved [18] Timer 3 Manual Update [17] Timer 3 Start/Stop [16] Timer 2 Auto Reload on/off [15] Reserved [14] Timer 2 Manual Update [13] Timer 2 Start/Stop [12] Timer 1 Auto Reload on/off [11] Timer 1 Output Inverter on/off [10] Timer 1 Manual Update [9] Timer 1 Start/Stop [8] Reserved [7:5] Dead zone enable/disable [4] Timer 0 Auto Reload on/off [3] Timer 0 Output Inverter on/off [2] Timer 0 Manual Update [1] Timer 0 Start/Stop [0] > May be you can replace 1 << bla by BIT(bla) ? Yes, BIT() would be nice here, but IMHO this is material for separate patch as all the macros in this driver already use 1 << bla. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/22/2013 11:11 PM, Tomasz Figa wrote: > On Monday 22 of July 2013 22:56:44 Daniel Lezcano wrote: >> On 07/22/2013 09:43 AM, Tomasz Figa wrote: >>> On Monday 22 of July 2013 05:50:09 Daniel Lezcano wrote: >>>> On 07/20/2013 02:04 AM, Tomasz Figa wrote: >>>>> PWM channel 4 has its autoreload bit located at different position. >>>>> This patch fixes the driver to account for that. >>>>> >>>>> This fixes a problem with the clocksource hanging after it overflows >>>>> because it is not reloaded any more. >>>>> >>>>> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> >>>>> --- >>>>> >>>>> drivers/clocksource/samsung_pwm_timer.c | 3 ++- >>>>> 1 file changed, 2 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/drivers/clocksource/samsung_pwm_timer.c >>>>> b/drivers/clocksource/samsung_pwm_timer.c index 3fa5b07..e238fb0 >>>>> 100644 >>>>> --- a/drivers/clocksource/samsung_pwm_timer.c >>>>> +++ b/drivers/clocksource/samsung_pwm_timer.c >>>>> @@ -47,7 +47,8 @@ >>>>> >>>>> #define TCON_START(chan) (1 << (4 * (chan) + 0)) >>>>> #define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1)) >>>>> #define TCON_INVERT(chan) (1 << (4 * (chan) + 2)) >>>>> >>>>> -#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) >>>>> +#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) \ >>>>> + + (((chan) < 5) ? 3 : 2))) >>>> >>>> This macro is not readable. Please, fix it up with a comment please. >>> >>> /* >>> >>> * Channel 4 (logically 5 in TCON register) has different position >>> * of autoreload bit. >>> */ >>> >>> #define _TCON_AUTORELOAD(chan) (1 << (4 * (chan) > + 3)) >>> #define _TCON_AUTORELOAD4(chan) (1 << (4 * (chan) > + 2)) >>> #define TCON_AUTORELOAD(chan) ((chan < 5) ? >>> >>> _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) >>> >>> What do you think? >> >> I don't get the arithmetic here and the code is poor in comment. A nice >> comment would valuable here. > > Each channel occupies 4 bits in TCON register, but there is a gap of 4 > bits after channel 0. In addition for channel 4 the location of autoreload > bit in its set of bits is 2 as opposed to 3 for other channels. Here's the > layout of the register, for reference: > > Timer 4 Auto Reload on/off [22] > Timer 4 Manual Update [21] > Timer 4 Start/Stop [20] > > Timer 3 Auto Reload on/off [19] > Reserved [18] > Timer 3 Manual Update [17] > Timer 3 Start/Stop [16] > > Timer 2 Auto Reload on/off [15] > Reserved [14] > Timer 2 Manual Update [13] > Timer 2 Start/Stop [12] > > Timer 1 Auto Reload on/off [11] > Timer 1 Output Inverter on/off [10] > Timer 1 Manual Update [9] > Timer 1 Start/Stop [8] > > Reserved [7:5] > Dead zone enable/disable [4] > > Timer 0 Auto Reload on/off [3] > Timer 0 Output Inverter on/off [2] > Timer 0 Manual Update [1] > Timer 0 Start/Stop [0] Ok, I understand now. Thanks for the clarification. IMHO, the description you gave above (without layout) will fit well for a comment :) >> May be you can replace 1 << bla by BIT(bla) ? > > Yes, BIT() would be nice here, but IMHO this is material for separate > patch as all the macros in this driver already use 1 << bla. Yes, I agree. Thanks -- Daniel
diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c index 3fa5b07..e238fb0 100644 --- a/drivers/clocksource/samsung_pwm_timer.c +++ b/drivers/clocksource/samsung_pwm_timer.c @@ -47,7 +47,8 @@ #define TCON_START(chan) (1 << (4 * (chan) + 0)) #define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1)) #define TCON_INVERT(chan) (1 << (4 * (chan) + 2)) -#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) +#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) \ + + (((chan) < 5) ? 3 : 2))) DEFINE_SPINLOCK(samsung_pwm_lock); EXPORT_SYMBOL(samsung_pwm_lock);
PWM channel 4 has its autoreload bit located at different position. This patch fixes the driver to account for that. This fixes a problem with the clocksource hanging after it overflows because it is not reloaded any more. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> --- drivers/clocksource/samsung_pwm_timer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)