| Message ID | 1374600682-19376-1-git-send-email-tobetter@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Dongjin, On 23 July 2013 23:01, Dongjin Kim <tobetter@gmail.com> wrote: > This patch adds device nodes for USBPHY to Exynos4x12. > > Signed-off-by: Dongjin Kim <tobetter@gmail.com> > --- > arch/arm/boot/dts/exynos4x12.dtsi | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi > index 01da194..9c3335b 100644 > --- a/arch/arm/boot/dts/exynos4x12.dtsi > +++ b/arch/arm/boot/dts/exynos4x12.dtsi > @@ -73,4 +73,22 @@ > clock-names = "sclk_fimg2d", "fimg2d"; > status = "disabled"; > }; > + > + usbphy@125B00000 { Extra 0 above. > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "samsung,exynos4x12-usb2phy"; > + reg = <0x125B0000 0x100>; > + ranges; > + > + clocks = <&clock 2>, <&clock 305>; > + clock-names = "xusbxti", "otg"; > + status = "disabled"; > + > + usbphy-sys { > + /* USB device and host PHY_CONTROL registers */ > + reg = <0x10020704 0xc>, > + <0x1001021c 0x4>; > + }; > + }; > }; Please add this node after tmu node (satisfies alphabetical order as well as increasing address value)
Thanks Sachin, On Wed, Jul 24, 2013 at 2:12 PM, Sachin Kamat <sachin.kamat@linaro.org> wrote: > Hi Dongjin, > > On 23 July 2013 23:01, Dongjin Kim <tobetter@gmail.com> wrote: >> This patch adds device nodes for USBPHY to Exynos4x12. >> >> Signed-off-by: Dongjin Kim <tobetter@gmail.com> >> --- >> arch/arm/boot/dts/exynos4x12.dtsi | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> >> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi >> index 01da194..9c3335b 100644 >> --- a/arch/arm/boot/dts/exynos4x12.dtsi >> +++ b/arch/arm/boot/dts/exynos4x12.dtsi >> @@ -73,4 +73,22 @@ >> clock-names = "sclk_fimg2d", "fimg2d"; >> status = "disabled"; >> }; >> + >> + usbphy@125B00000 { > > Extra 0 above. > This is my bad, I will fix. >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "samsung,exynos4x12-usb2phy"; >> + reg = <0x125B0000 0x100>; >> + ranges; >> + >> + clocks = <&clock 2>, <&clock 305>; >> + clock-names = "xusbxti", "otg"; >> + status = "disabled"; >> + >> + usbphy-sys { >> + /* USB device and host PHY_CONTROL registers */ >> + reg = <0x10020704 0xc>, >> + <0x1001021c 0x4>; >> + }; >> + }; >> }; > > Please add this node after tmu node (satisfies alphabetical order as > well as increasing address value) No tmu node in exynos4x12.dtsi in mainline v3.11-rc2 yet, even in Kukjin's branch. > > > -- > With warm regards, > Sachin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 24 July 2013 11:29, Dongjin Kim <tobetter@gmail.com> wrote: > Thanks Sachin, > > On Wed, Jul 24, 2013 at 2:12 PM, Sachin Kamat <sachin.kamat@linaro.org> wrote: >> Hi Dongjin, >> >> On 23 July 2013 23:01, Dongjin Kim <tobetter@gmail.com> wrote: >>> This patch adds device nodes for USBPHY to Exynos4x12. >>> >>> Signed-off-by: Dongjin Kim <tobetter@gmail.com> >>> --- >>> arch/arm/boot/dts/exynos4x12.dtsi | 18 ++++++++++++++++++ >>> 1 file changed, 18 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi >>> index 01da194..9c3335b 100644 >>> --- a/arch/arm/boot/dts/exynos4x12.dtsi >>> +++ b/arch/arm/boot/dts/exynos4x12.dtsi >>> @@ -73,4 +73,22 @@ >>> clock-names = "sclk_fimg2d", "fimg2d"; >>> status = "disabled"; >>> }; >>> + >>> + usbphy@125B00000 { >> >> Extra 0 above. >> > This is my bad, I will fix. > >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + compatible = "samsung,exynos4x12-usb2phy"; >>> + reg = <0x125B0000 0x100>; >>> + ranges; >>> + >>> + clocks = <&clock 2>, <&clock 305>; >>> + clock-names = "xusbxti", "otg"; >>> + status = "disabled"; >>> + >>> + usbphy-sys { >>> + /* USB device and host PHY_CONTROL registers */ >>> + reg = <0x10020704 0xc>, >>> + <0x1001021c 0x4>; >>> + }; >>> + }; >>> }; >> >> Please add this node after tmu node (satisfies alphabetical order as >> well as increasing address value) > No tmu node in exynos4x12.dtsi in mainline v3.11-rc2 yet, even in > Kukjin's branch. Sorry, that patch is not yet applied to for-next. I will re-send again. You may ignore this comment for now.
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 01da194..9c3335b 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -73,4 +73,22 @@ clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; + + usbphy@125B00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "samsung,exynos4x12-usb2phy"; + reg = <0x125B0000 0x100>; + ranges; + + clocks = <&clock 2>, <&clock 305>; + clock-names = "xusbxti", "otg"; + status = "disabled"; + + usbphy-sys { + /* USB device and host PHY_CONTROL registers */ + reg = <0x10020704 0xc>, + <0x1001021c 0x4>; + }; + }; };
This patch adds device nodes for USBPHY to Exynos4x12. Signed-off-by: Dongjin Kim <tobetter@gmail.com> --- arch/arm/boot/dts/exynos4x12.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)