diff mbox

[v4,01/13] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs

Message ID 1374671845-30373-2-git-send-email-s.nawrocki@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Sylwester Nawrocki/Kernel \(PLT\) /SRPOL/Staff Engineer/Samsung Electronics July 24, 2013, 1:17 p.m. UTC 
Add separate nodes for the CAMCLK pin and turn off pull-up on camera
ports A, B. The video bus pins and the clock output (CAMCLK) pin need
separate nodes since full camera port is not used in some configurations,
e.g. for MIPI CSI-2 bus only CAMCLK is required and data/clock signal
use separate dedicated pins.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi |   40 ++++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 704290f..55ff73b 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,13 +401,26 @@ 
 			samsung,pin-drv = <0>;
 		};
 
-		cam_port_a: cam-port-a {
+		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
-					"gpj1-4";
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
 			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
 			samsung,pin-drv = <0>;
 		};
 	};
@@ -778,16 +791,29 @@ 
 			samsung,pin-drv = <3>;
 		};
 
-		cam_port_b: cam-port-b {
+		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
-					"gpm2-2";
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
 			samsung,pin-drv = <0>;
 		};
 
+		cam_port_b_clk_active: cam-port-b-clk-active {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_b_clk_idle: cam-port-b-clk-idle {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
 			samsung,pin-function = <0xf>;