diff mbox

[v4,01/13,media] exynos5-is: Adding media device driver for exynos5

Message ID 1375866242-18084-2-git-send-email-arun.kk@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Arun Kumar K Aug. 7, 2013, 9:03 a.m. UTC
From: Shaik Ameer Basha <shaik.ameer@samsung.com>

This patch adds support for media device for EXYNOS5 SoCs.
The current media device supports the following ips to connect
through the media controller framework.

* MIPI-CSIS
  Support interconnection(subdev interface) between devices

* FIMC-LITE
  Support capture interface from device(Sensor, MIPI-CSIS) to memory
  Support interconnection(subdev interface) between devices

* FIMC-IS
  Camera post-processing IP having multiple sub-nodes.

G-Scaler will be added later to the current media device.

The media device creates two kinds of pipelines for connecting
the above mentioned IPs.
The pipeline0 is uses Sensor, MIPI-CSIS and FIMC-LITE which captures
image data and dumps to memory.
Pipeline1 uses FIMC-IS components for doing post-processing
operations on the captured image and give scaled YUV output.

Pipeline0
  +--------+     +-----------+     +-----------+     +--------+
  | Sensor | --> | MIPI-CSIS | --> | FIMC-LITE | --> | Memory |
  +--------+     +-----------+     +-----------+     +--------+

Pipeline1
 +--------+      +--------+     +-----------+     +-----------+
 | Memory | -->  |  ISP   | --> |    SCC    | --> |    SCP    |
 +--------+      +--------+     +-----------+     +-----------+

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 .../devicetree/bindings/media/exynos5-mdev.txt     |  148 +++
 drivers/media/platform/exynos5-is/exynos5-mdev.c   | 1189 ++++++++++++++++++++
 drivers/media/platform/exynos5-is/exynos5-mdev.h   |  164 +++
 3 files changed, 1501 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/exynos5-mdev.txt
 create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.c
 create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.h

Comments

Sylwester Nawrocki Aug. 8, 2013, 10:08 p.m. UTC | #1
On 08/07/2013 11:03 AM, Arun Kumar K wrote:
> From: Shaik Ameer Basha<shaik.ameer@samsung.com>
>
> This patch adds support for media device for EXYNOS5 SoCs.
> The current media device supports the following ips to connect
> through the media controller framework.
>
> * MIPI-CSIS
>    Support interconnection(subdev interface) between devices
>
> * FIMC-LITE
>    Support capture interface from device(Sensor, MIPI-CSIS) to memory
>    Support interconnection(subdev interface) between devices
>
> * FIMC-IS
>    Camera post-processing IP having multiple sub-nodes.
>
> G-Scaler will be added later to the current media device.
>
> The media device creates two kinds of pipelines for connecting
> the above mentioned IPs.
> The pipeline0 is uses Sensor, MIPI-CSIS and FIMC-LITE which captures
> image data and dumps to memory.
> Pipeline1 uses FIMC-IS components for doing post-processing
> operations on the captured image and give scaled YUV output.
>
> Pipeline0
>    +--------+     +-----------+     +-----------+     +--------+
>    | Sensor | -->  | MIPI-CSIS | -->  | FIMC-LITE | -->  | Memory |
>    +--------+     +-----------+     +-----------+     +--------+
>
> Pipeline1
>   +--------+      +--------+     +-----------+     +-----------+
>   | Memory | -->   |  ISP   | -->  |    SCC    | -->  |    SCP    |
>   +--------+      +--------+     +-----------+     +-----------+
>
> Signed-off-by: Shaik Ameer Basha<shaik.ameer@samsung.com>
> Signed-off-by: Arun Kumar K<arun.kk@samsung.com>
> ---
>   .../devicetree/bindings/media/exynos5-mdev.txt     |  148 +++
>   drivers/media/platform/exynos5-is/exynos5-mdev.c   | 1189 ++++++++++++++++++++
>   drivers/media/platform/exynos5-is/exynos5-mdev.h   |  164 +++
>   3 files changed, 1501 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/media/exynos5-mdev.txt
>   create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.c
>   create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.h
>
> diff --git a/Documentation/devicetree/bindings/media/exynos5-mdev.txt b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
> new file mode 100644
> index 0000000..8b2ffb9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
> @@ -0,0 +1,148 @@
> +Samsung EXYNOS5 SoC Camera Subsystem
> +------------------------------------
> +
> +The Exynos5 SoC Camera subsystem comprises of multiple sub-devices
> +represented by separate device tree nodes. Currently this includes: FIMC-LITE,
> +MIPI CSIS and FIMC-IS.
> +
> +The sub-subdevices are defined as child nodes of the common 'camera' node which
> +also includes common properties of the whole subsystem not really specific to
> +any single sub-device, like common camera port pins or the CAMCLK clock outputs
> +for external image sensors attached to an SoC.
> +
> +Common 'camera' node
> +--------------------
> +
> +Required properties:
> +
> +- compatible	: must be "samsung,exynos5-fimc", "simple-bus"
> +- clocks	: list of clock specifiers, corresponding to entries in
> +		  the clock-names property;
> +- clock-names	: must contain "sclk_bayer" entry and matching clock property
> +                  entry

I guess "and matching clock property entry" could be removed.

> +The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
> +to define a required pinctrl state named "default" and optional pinctrl states:

How about only supporting "default" pinctrl state in this initial DT 
binding/driver
version ? The optional states could be added later, my concern is that 
except the
camera port A, B there is also the RGB camera bay. Thus using "idle", 
"active-a",
active-b" won't work any more. We need to find some better solution for 
that.

Besides now when you removed the clock provider, there is not much you 
could do
with those optional pinctrl states. Those were originally meant to be 
used in
the clk_prepare/clk_unprepare ops. So, e.g. when sensor disables the 
clock the
host driver sets a clock output pin into idle state, e.g. input with 
pull down.

But maybe Exynos5 SoCs got improved comparing to e.g. Exynos4 so the 
clock output
pin is put into high impedance state when the sclk_cam clock is disabled ?
However that seems unlikely.

> +"idle", "active-a", active-b". These optional states can be used to switch the
> +camera port pinmux at runtime. The "idle" state should configure both the camera
> +ports A and B into high impedance state, especially the CAMCLK clock output
> +should be inactive. For the "active-a" state the camera port A must be activated
> +and the port B deactivated and for the state "active-b" it should be the other
> +way around.
> +
> +The 'camera' node must include at least one 'fimc-lite' child node.

This shouldn't be necessary, i.e. making the individual device nodes 
child nodes
of the camera node. Think of GScaler which can be used either by the 
camera or
the display/HDMI subsystem. Although csis and fimc-lite are purely 
camera specific
I'm inclined to move them out of the camera node and couple them with 
this node
either manually through 'compatible' values or explicitly through phandles.

> +'parallel-ports' node
> +---------------------
> +
> +This node should contain child 'port' nodes specifying active parallel video
> +input ports. It includes camera A and camera B inputs. 'reg' property in the

I suppose the RGB camera bay needs to be also listed here. It could be 
added
later but might be more reasonable to add it now, e.g.

1 - parallel camport A
2 - parallel camport B
3 - serial MIPI CSI-2 port 0
4 - serial MIPI CSI-2 port 1
5 - RGB camera bay

3, 4 are already described in samsung-mipi-csis.txt.

> +port nodes specifies data input - 0, 1 indicates input A, B respectively.
> +
> +Image sensor nodes
> +------------------
> +
> +The sensor device nodes should be added to their control bus controller (e.g.
> +I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
> +using the common video interfaces bindings, defined in video-interfaces.txt.
> +The implementation of this bindings requires clock-frequency property to be
> +present in the sensor device nodes.
> +
> +Example:
> +
> +	aliases {
> +		fimc-lite0 =&fimc_lite_0
> +	};
[...]
> +	camera {
> +		compatible = "samsung,exynos5-fimc", "simple-bus";
> +		#address-cells =<1>;
> +		#size-cells =<1>;
> +		status = "okay";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 =<&cam_port_a_clk_active>;
> +
> +		/* parallel camera ports */
> +		parallel-ports {
> +			/* camera A input */
> +			port@0 {
> +				reg =<0>;
> +				fimc0_ep: endpoint {
> +					remote-endpoint =<&s5k6aa_ep>;
> +					bus-width =<8>;
> +					hsync-active =<0>;
> +					vsync-active =<1>;
> +					pclk-sample =<1>;
> +				};
> +			};
> +		};
> +
> +		fimc_lite_0: fimc-lite@13C00000 {
> +			compatible = "samsung,exynos5250-fimc-lite";
> +			reg =<0x13C00000 0x1000>;
> +			interrupts =<0 126 0>;
> +			clocks =<&clock 129>;
> +			clock-names = "flite";
> +			status = "okay";
> +		};
> +
> +		csis_0: csis@11880000 {
> +			compatible = "samsung,exynos4210-csis";
> +			reg =<0x11880000 0x1000>;
> +			interrupts =<0 78 0>;
> +			/* camera C input */
> +			port@3 {
> +				reg =<3>;
> +				csis0_ep: endpoint {
> +					remote-endpoint =<&s5c73m3_ep>;
> +					data-lanes =<1 2 3 4>;
> +					samsung,csis-hs-settle =<12>;
> +				};
> +			};
> +		};
> +	};
> +
> +MIPI-CSIS device binding is defined in samsung-mipi-csis.txt and FIMC-LITE
> +device binding is defined in exynos-fimc-lite.txt.
> diff --git a/drivers/media/platform/exynos5-is/exynos5-mdev.c b/drivers/media/platform/exynos5-is/exynos5-mdev.c
> new file mode 100644
> index 0000000..4cef69e
> --- /dev/null
> +++ b/drivers/media/platform/exynos5-is/exynos5-mdev.c
> @@ -0,0 +1,1189 @@
[...]
> +/* Register FIMC, FIMC-LITE and CSIS media entities */
> +static int fimc_md_register_of_platform_entities(struct fimc_md *fmd,
> +						 struct device_node *parent)
> +{
> +	struct device_node *node;
> +	int ret = 0;
> +
> +	for_each_available_child_of_node(parent, node) {
> +		struct platform_device *pdev;
> +		int plat_entity = -1;
> +
> +		pdev = of_find_device_by_node(node);
> +		if (!pdev)
> +			continue;
> +
> +		/* If driver of any entity isn't ready try all again later. */
> +		if (!strcmp(node->name, CSIS_OF_NODE_NAME))
> +			plat_entity = IDX_CSIS;
> +		else if (!strcmp(node->name, FIMC_LITE_OF_NODE_NAME))
> +			plat_entity = IDX_FLITE;
> +		else if (!strcmp(node->name, FIMC_IS_OF_NODE_NAME))
> +			plat_entity = IDX_FIMC_IS;

And that needs to be replaced with something else, e.g. phandles or 
searching
with compatible value as the key. The former will be of course less 
efficient.
By the time I wrote similar code for Exynos4 I wasn't really aware the 
device
node names should not have semantic meaning.

> +		if (plat_entity>= 0)
> +			ret = fimc_md_register_platform_entity(fmd, pdev,
> +							plat_entity);
> +		put_device(&pdev->dev);
> +		if (ret<  0)
> +			break;
> +	}
> +
> +	return ret;
> +}

Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Arun Kumar K Aug. 13, 2013, 8:40 a.m. UTC | #2
Hi Sylwester,

On Fri, Aug 9, 2013 at 3:38 AM, Sylwester Nawrocki
<sylvester.nawrocki@gmail.com> wrote:
> On 08/07/2013 11:03 AM, Arun Kumar K wrote:
>>
>> From: Shaik Ameer Basha<shaik.ameer@samsung.com>
>>
>> This patch adds support for media device for EXYNOS5 SoCs.
>> The current media device supports the following ips to connect
>> through the media controller framework.
>>
>> * MIPI-CSIS
>>    Support interconnection(subdev interface) between devices
>>
>> * FIMC-LITE
>>    Support capture interface from device(Sensor, MIPI-CSIS) to memory
>>    Support interconnection(subdev interface) between devices
>>
>> * FIMC-IS
>>    Camera post-processing IP having multiple sub-nodes.
>>
>> G-Scaler will be added later to the current media device.
>>
>> The media device creates two kinds of pipelines for connecting
>> the above mentioned IPs.
>> The pipeline0 is uses Sensor, MIPI-CSIS and FIMC-LITE which captures
>> image data and dumps to memory.
>> Pipeline1 uses FIMC-IS components for doing post-processing
>> operations on the captured image and give scaled YUV output.
>>
>> Pipeline0
>>    +--------+     +-----------+     +-----------+     +--------+
>>    | Sensor | -->  | MIPI-CSIS | -->  | FIMC-LITE | -->  | Memory |
>>    +--------+     +-----------+     +-----------+     +--------+
>>
>> Pipeline1
>>   +--------+      +--------+     +-----------+     +-----------+
>>   | Memory | -->   |  ISP   | -->  |    SCC    | -->  |    SCP    |
>>   +--------+      +--------+     +-----------+     +-----------+
>>
>> Signed-off-by: Shaik Ameer Basha<shaik.ameer@samsung.com>
>> Signed-off-by: Arun Kumar K<arun.kk@samsung.com>
>> ---
>>   .../devicetree/bindings/media/exynos5-mdev.txt     |  148 +++
>>   drivers/media/platform/exynos5-is/exynos5-mdev.c   | 1189
>> ++++++++++++++++++++
>>   drivers/media/platform/exynos5-is/exynos5-mdev.h   |  164 +++
>>   3 files changed, 1501 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/media/exynos5-mdev.txt
>>   create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.c
>>   create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.h
>>
>> diff --git a/Documentation/devicetree/bindings/media/exynos5-mdev.txt
>> b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
>> new file mode 100644
>> index 0000000..8b2ffb9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
>> @@ -0,0 +1,148 @@
>> +Samsung EXYNOS5 SoC Camera Subsystem
>> +------------------------------------
>> +
>> +The Exynos5 SoC Camera subsystem comprises of multiple sub-devices
>> +represented by separate device tree nodes. Currently this includes:
>> FIMC-LITE,
>> +MIPI CSIS and FIMC-IS.
>> +
>> +The sub-subdevices are defined as child nodes of the common 'camera' node
>> which
>> +also includes common properties of the whole subsystem not really
>> specific to
>> +any single sub-device, like common camera port pins or the CAMCLK clock
>> outputs
>> +for external image sensors attached to an SoC.
>> +
>> +Common 'camera' node
>> +--------------------
>> +
>> +Required properties:
>> +
>> +- compatible   : must be "samsung,exynos5-fimc", "simple-bus"
>> +- clocks       : list of clock specifiers, corresponding to entries in
>> +                 the clock-names property;
>> +- clock-names  : must contain "sclk_bayer" entry and matching clock
>> property
>> +                  entry
>
>
> I guess "and matching clock property entry" could be removed.
>

Ok

>
>> +The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be
>> used
>> +to define a required pinctrl state named "default" and optional pinctrl
>> states:
>
>
> How about only supporting "default" pinctrl state in this initial DT
> binding/driver
> version ? The optional states could be added later, my concern is that
> except the
> camera port A, B there is also the RGB camera bay. Thus using "idle",
> "active-a",
> active-b" won't work any more. We need to find some better solution for
> that.
>

Ok will put only default state.

> Besides now when you removed the clock provider, there is not much you could
> do
> with those optional pinctrl states. Those were originally meant to be used
> in
> the clk_prepare/clk_unprepare ops. So, e.g. when sensor disables the clock
> the
> host driver sets a clock output pin into idle state, e.g. input with pull
> down.
>
> But maybe Exynos5 SoCs got improved comparing to e.g. Exynos4 so the clock
> output
> pin is put into high impedance state when the sclk_cam clock is disabled ?
> However that seems unlikely.
>
>
>> +"idle", "active-a", active-b". These optional states can be used to
>> switch the
>> +camera port pinmux at runtime. The "idle" state should configure both the
>> camera
>> +ports A and B into high impedance state, especially the CAMCLK clock
>> output
>> +should be inactive. For the "active-a" state the camera port A must be
>> activated
>> +and the port B deactivated and for the state "active-b" it should be the
>> other
>> +way around.
>> +
>> +The 'camera' node must include at least one 'fimc-lite' child node.
>
>
> This shouldn't be necessary, i.e. making the individual device nodes child
> nodes
> of the camera node. Think of GScaler which can be used either by the camera
> or
> the display/HDMI subsystem. Although csis and fimc-lite are purely camera
> specific
> I'm inclined to move them out of the camera node and couple them with this
> node
> either manually through 'compatible' values or explicitly through phandles.
>
>
>> +'parallel-ports' node
>> +---------------------
>> +
>> +This node should contain child 'port' nodes specifying active parallel
>> video
>> +input ports. It includes camera A and camera B inputs. 'reg' property in
>> the
>
>
> I suppose the RGB camera bay needs to be also listed here. It could be added
> later but might be more reasonable to add it now, e.g.
>
> 1 - parallel camport A
> 2 - parallel camport B
> 3 - serial MIPI CSI-2 port 0
> 4 - serial MIPI CSI-2 port 1
> 5 - RGB camera bay
>
> 3, 4 are already described in samsung-mipi-csis.txt.
>
>
>> +port nodes specifies data input - 0, 1 indicates input A, B respectively.
>> +
>> +Image sensor nodes
>> +------------------
>> +
>> +The sensor device nodes should be added to their control bus controller
>> (e.g.
>> +I2C0) nodes and linked to a port node in the csis or the parallel-ports
>> node,
>> +using the common video interfaces bindings, defined in
>> video-interfaces.txt.
>> +The implementation of this bindings requires clock-frequency property to
>> be
>> +present in the sensor device nodes.
>> +
>> +Example:
>> +
>> +       aliases {
>> +               fimc-lite0 =&fimc_lite_0
>> +       };
>
> [...]
>
>> +       camera {
>> +               compatible = "samsung,exynos5-fimc", "simple-bus";
>> +               #address-cells =<1>;
>> +               #size-cells =<1>;
>> +               status = "okay";
>> +
>> +               pinctrl-names = "default";
>> +               pinctrl-0 =<&cam_port_a_clk_active>;
>> +
>> +               /* parallel camera ports */
>> +               parallel-ports {
>> +                       /* camera A input */
>> +                       port@0 {
>> +                               reg =<0>;
>> +                               fimc0_ep: endpoint {
>> +                                       remote-endpoint =<&s5k6aa_ep>;
>> +                                       bus-width =<8>;
>> +                                       hsync-active =<0>;
>> +                                       vsync-active =<1>;
>> +                                       pclk-sample =<1>;
>> +                               };
>> +                       };
>> +               };
>> +
>> +               fimc_lite_0: fimc-lite@13C00000 {
>> +                       compatible = "samsung,exynos5250-fimc-lite";
>> +                       reg =<0x13C00000 0x1000>;
>> +                       interrupts =<0 126 0>;
>> +                       clocks =<&clock 129>;
>> +                       clock-names = "flite";
>> +                       status = "okay";
>> +               };
>> +
>> +               csis_0: csis@11880000 {
>> +                       compatible = "samsung,exynos4210-csis";
>> +                       reg =<0x11880000 0x1000>;
>> +                       interrupts =<0 78 0>;
>> +                       /* camera C input */
>> +                       port@3 {
>> +                               reg =<3>;
>> +                               csis0_ep: endpoint {
>> +                                       remote-endpoint =<&s5c73m3_ep>;
>> +                                       data-lanes =<1 2 3 4>;
>> +                                       samsung,csis-hs-settle =<12>;
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +MIPI-CSIS device binding is defined in samsung-mipi-csis.txt and
>> FIMC-LITE
>> +device binding is defined in exynos-fimc-lite.txt.
>> diff --git a/drivers/media/platform/exynos5-is/exynos5-mdev.c
>> b/drivers/media/platform/exynos5-is/exynos5-mdev.c
>> new file mode 100644
>> index 0000000..4cef69e
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos5-is/exynos5-mdev.c
>> @@ -0,0 +1,1189 @@
>
> [...]
>
>> +/* Register FIMC, FIMC-LITE and CSIS media entities */
>> +static int fimc_md_register_of_platform_entities(struct fimc_md *fmd,
>> +                                                struct device_node
>> *parent)
>> +{
>> +       struct device_node *node;
>> +       int ret = 0;
>> +
>> +       for_each_available_child_of_node(parent, node) {
>> +               struct platform_device *pdev;
>> +               int plat_entity = -1;
>> +
>> +               pdev = of_find_device_by_node(node);
>> +               if (!pdev)
>> +                       continue;
>> +
>> +               /* If driver of any entity isn't ready try all again
>> later. */
>> +               if (!strcmp(node->name, CSIS_OF_NODE_NAME))
>> +                       plat_entity = IDX_CSIS;
>> +               else if (!strcmp(node->name, FIMC_LITE_OF_NODE_NAME))
>> +                       plat_entity = IDX_FLITE;
>> +               else if (!strcmp(node->name, FIMC_IS_OF_NODE_NAME))
>> +                       plat_entity = IDX_FIMC_IS;
>
>
> And that needs to be replaced with something else, e.g. phandles or
> searching
> with compatible value as the key. The former will be of course less
> efficient.
> By the time I wrote similar code for Exynos4 I wasn't really aware the
> device
> node names should not have semantic meaning.
>

Ok I will use phandles.

Regards
Arun
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/media/exynos5-mdev.txt b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
new file mode 100644
index 0000000..8b2ffb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
@@ -0,0 +1,148 @@ 
+Samsung EXYNOS5 SoC Camera Subsystem
+------------------------------------
+
+The Exynos5 SoC Camera subsystem comprises of multiple sub-devices
+represented by separate device tree nodes. Currently this includes: FIMC-LITE,
+MIPI CSIS and FIMC-IS.
+
+The sub-subdevices are defined as child nodes of the common 'camera' node which
+also includes common properties of the whole subsystem not really specific to
+any single sub-device, like common camera port pins or the CAMCLK clock outputs
+for external image sensors attached to an SoC.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible	: must be "samsung,exynos5-fimc", "simple-bus"
+- clocks	: list of clock specifiers, corresponding to entries in
+		  the clock-names property;
+- clock-names	: must contain "sclk_bayer" entry and matching clock property
+                  entry
+
+The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
+to define a required pinctrl state named "default" and optional pinctrl states:
+"idle", "active-a", active-b". These optional states can be used to switch the
+camera port pinmux at runtime. The "idle" state should configure both the camera
+ports A and B into high impedance state, especially the CAMCLK clock output
+should be inactive. For the "active-a" state the camera port A must be activated
+and the port B deactivated and for the state "active-b" it should be the other
+way around.
+
+The 'camera' node must include at least one 'fimc-lite' child node.
+
+'parallel-ports' node
+---------------------
+
+This node should contain child 'port' nodes specifying active parallel video
+input ports. It includes camera A and camera B inputs. 'reg' property in the
+port nodes specifies data input - 0, 1 indicates input A, B respectively.
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
+using the common video interfaces bindings, defined in video-interfaces.txt.
+The implementation of this bindings requires clock-frequency property to be
+present in the sensor device nodes.
+
+Example:
+
+	aliases {
+		fimc-lite0 = &fimc_lite_0
+	};
+
+	/* Parallel bus IF sensor */
+	i2c_0: i2c@13860000 {
+		s5k6aa: sensor@3c {
+			compatible = "samsung,s5k6aafx";
+			reg = <0x3c>;
+			vddio-supply = <...>;
+
+			clock-frequency = <24000000>;
+			clocks = <...>;
+			clock-names = "mclk";
+
+			port {
+				s5k6aa_ep: endpoint {
+					remote-endpoint = <&fimc0_ep>;
+					bus-width = <8>;
+					hsync-active = <0>;
+					vsync-active = <1>;
+					pclk-sample = <1>;
+				};
+			};
+		};
+	};
+
+	/* MIPI CSI-2 bus IF sensor */
+	s5c73m3: sensor@1a {
+		compatible = "samsung,s5c73m3";
+		reg = <0x1a>;
+		vddio-supply = <...>;
+
+		clock-frequency = <24000000>;
+		clocks = <...>;
+		clock-names = "mclk";
+
+		port {
+			s5c73m3_1: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csis0_ep>;
+			};
+		};
+	};
+
+	camera {
+		compatible = "samsung,exynos5-fimc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_port_a_clk_active>;
+
+		/* parallel camera ports */
+		parallel-ports {
+			/* camera A input */
+			port@0 {
+				reg = <0>;
+				fimc0_ep: endpoint {
+					remote-endpoint = <&s5k6aa_ep>;
+					bus-width = <8>;
+					hsync-active = <0>;
+					vsync-active = <1>;
+					pclk-sample = <1>;
+				};
+			};
+		};
+
+		fimc_lite_0: fimc-lite@13C00000 {
+			compatible = "samsung,exynos5250-fimc-lite";
+			reg = <0x13C00000 0x1000>;
+			interrupts = <0 126 0>;
+			clocks = <&clock 129>;
+			clock-names = "flite";
+			status = "okay";
+		};
+
+		csis_0: csis@11880000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11880000 0x1000>;
+			interrupts = <0 78 0>;
+			/* camera C input */
+			port@3 {
+				reg = <3>;
+				csis0_ep: endpoint {
+					remote-endpoint = <&s5c73m3_ep>;
+					data-lanes = <1 2 3 4>;
+					samsung,csis-hs-settle = <12>;
+				};
+			};
+		};
+	};
+
+MIPI-CSIS device binding is defined in samsung-mipi-csis.txt and FIMC-LITE
+device binding is defined in exynos-fimc-lite.txt.
diff --git a/drivers/media/platform/exynos5-is/exynos5-mdev.c b/drivers/media/platform/exynos5-is/exynos5-mdev.c
new file mode 100644
index 0000000..4cef69e
--- /dev/null
+++ b/drivers/media/platform/exynos5-is/exynos5-mdev.c
@@ -0,0 +1,1189 @@ 
+/*
+ * EXYNOS5 SoC series camera host interface media device driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Shaik Ameer Basha <shaik.ameer@samsung.com>
+ * Arun Kumar K <arun.kk@samsung.com>
+ *
+ * This driver is based on exynos4-is media device driver written by
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation, either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
+#include <media/media-device.h>
+#include <media/s5p_fimc.h>
+
+#include "exynos5-mdev.h"
+#include "fimc-is.h"
+
+#define dbg(fmt, args...) \
+	pr_debug("%s:%d: " fmt "\n", __func__, __LINE__, ##args)
+
+#define BAYER_CLK_NAME "sclk_bayer"
+
+/**
+ * fimc_pipeline_prepare - update pipeline information with subdevice pointers
+ * @me: media entity terminating the pipeline
+ *
+ * Caller holds the graph mutex.
+ */
+static void fimc_pipeline_prepare(struct fimc_pipeline *p,
+				  struct media_entity *me)
+{
+	struct v4l2_subdev *sd;
+	int i;
+
+	for (i = 0; i < IDX_MAX; i++)
+		p->subdevs[i] = NULL;
+
+	while (1) {
+		struct media_pad *pad = NULL;
+
+		/* Find remote source pad */
+		for (i = 0; i < me->num_pads; i++) {
+			struct media_pad *spad = &me->pads[i];
+			if (!(spad->flags & MEDIA_PAD_FL_SINK))
+				continue;
+			pad = media_entity_remote_pad(spad);
+			if (pad)
+				break;
+		}
+
+		if (pad == NULL ||
+		    media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) {
+			break;
+		}
+		sd = media_entity_to_v4l2_subdev(pad->entity);
+
+		switch (sd->grp_id) {
+		case GRP_ID_FIMC_IS_SENSOR:
+		case GRP_ID_SENSOR:
+			p->subdevs[IDX_SENSOR] = sd;
+			break;
+		case GRP_ID_CSIS:
+			p->subdevs[IDX_CSIS] = sd;
+			break;
+		case GRP_ID_FLITE:
+			p->subdevs[IDX_FLITE] = sd;
+			break;
+		default:
+			pr_warn("%s: Unknown subdev grp_id: %#x\n",
+				__func__, sd->grp_id);
+		}
+		me = &sd->entity;
+		if (me->num_pads == 1)
+			break;
+	}
+
+	/*
+	 * For using FIMC-IS firmware controlled sensors, ISP subdev
+	 * has to be initialized along with pipeline0 devices.
+	 * So an ISP subdev from a free ISP pipeline is assigned to
+	 * this pipeline
+	 */
+	if (p->subdevs[IDX_SENSOR]->grp_id == GRP_ID_FIMC_IS_SENSOR) {
+		struct fimc_pipeline_isp *p_isp;
+
+		list_for_each_entry(p_isp, p->isp_pipelines, list) {
+			if (!p_isp->in_use) {
+				p->subdevs[IDX_FIMC_IS] =
+					p_isp->subdevs[IDX_ISP];
+				p_isp->in_use = true;
+				break;
+			}
+		}
+	}
+}
+
+/**
+ * __subdev_set_power - change power state of a single subdev
+ * @sd: subdevice to change power state for
+ * @on: 1 to enable power or 0 to disable
+ *
+ * Return result of s_power subdev operation or -ENXIO if sd argument
+ * is NULL. Return 0 if the subdevice does not implement s_power.
+ */
+static int __subdev_set_power(struct v4l2_subdev *sd, int on)
+{
+	int *use_count;
+	int ret;
+
+	if (sd == NULL)
+		return -ENXIO;
+
+	use_count = &sd->entity.use_count;
+	if (on && (*use_count)++ > 0)
+		return 0;
+	else if (!on && (*use_count == 0 || --(*use_count) > 0))
+		return 0;
+	ret = v4l2_subdev_call(sd, core, s_power, on);
+
+	return ret != -ENOIOCTLCMD ? ret : 0;
+}
+
+/**
+ * fimc_pipeline_s_power - change power state of all pipeline subdevs
+ * @fimc: fimc device terminating the pipeline
+ * @state: true to power on, false to power off
+ *
+ * Needs to be called with the graph mutex held.
+ */
+static int fimc_pipeline_s_power(struct fimc_pipeline *p, bool state)
+{
+	unsigned int i;
+	int ret;
+	struct fimc_is_isp *isp_dev;
+
+	if (p->subdevs[IDX_SENSOR] == NULL)
+		return -ENXIO;
+
+	/*
+	 * If sensor is firmware controlled IS-sensor,
+	 * set sensor sd to isp context.
+	 */
+	if (p->subdevs[IDX_FIMC_IS]) {
+		isp_dev = v4l2_get_subdevdata(p->subdevs[IDX_FIMC_IS]);
+		isp_dev->sensor_sd = p->subdevs[IDX_SENSOR];
+	}
+
+	for (i = 0; i < IDX_MAX; i++) {
+		unsigned int idx = state ? i : (IDX_MAX - 1) - i;
+
+		ret = __subdev_set_power(p->subdevs[idx], state);
+		if (ret < 0 && ret != -ENXIO)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * __fimc_pipeline_open - update the pipeline information, enable power
+ *                        of all pipeline subdevs and the sensor clock
+ * @me: media entity to start graph walk with
+ * @prepare: true to walk the current pipeline and acquire all subdevs
+ *
+ * Called with the graph mutex held.
+ */
+static int __fimc_pipeline_open(struct exynos_media_pipeline *ep,
+				struct media_entity *me, bool prepare)
+{
+	struct fimc_pipeline *p = to_fimc_pipeline(ep);
+	struct v4l2_subdev *sd;
+	struct fimc_source_info *si;
+	struct fimc_md *fmd;
+	int ret;
+
+	if (WARN_ON(p == NULL || me == NULL))
+		return -EINVAL;
+
+	if (prepare)
+		fimc_pipeline_prepare(p, me);
+
+	sd = p->subdevs[IDX_SENSOR];
+	if (sd == NULL)
+		return -EINVAL;
+
+	si = v4l2_get_subdev_hostdata(sd);
+	fmd = entity_to_fimc_mdev(&sd->entity);
+	ret = clk_prepare_enable(fmd->clk_bayer);
+	if (ret < 0)
+		return ret;
+
+	ret = fimc_pipeline_s_power(p, 1);
+	if (!ret)
+		return 0;
+
+	return ret;
+}
+
+/**
+ * __fimc_pipeline_close - disable the sensor clock and pipeline power
+ * @fimc: fimc device terminating the pipeline
+ *
+ * Disable power of all subdevs and turn the external sensor clock off.
+ */
+static int __fimc_pipeline_close(struct exynos_media_pipeline *ep)
+{
+	struct fimc_pipeline *p = to_fimc_pipeline(ep);
+	struct v4l2_subdev *sd = p ? p->subdevs[IDX_SENSOR] : NULL;
+	struct fimc_source_info *si;
+	struct fimc_md *fmd;
+	int ret = 0;
+
+	if (WARN_ON(sd == NULL))
+		return -EINVAL;
+
+	if (p->subdevs[IDX_SENSOR])
+		ret = fimc_pipeline_s_power(p, 0);
+
+	si = v4l2_get_subdev_hostdata(sd);
+	fmd = entity_to_fimc_mdev(&sd->entity);
+	clk_disable_unprepare(fmd->clk_bayer);
+
+	if (p->subdevs[IDX_SENSOR]->grp_id == GRP_ID_FIMC_IS_SENSOR) {
+		struct fimc_pipeline_isp *p_isp;
+
+		list_for_each_entry(p_isp, p->isp_pipelines, list) {
+			if (p_isp->subdevs[IDX_ISP] ==
+					p->subdevs[IDX_FIMC_IS]) {
+				p->subdevs[IDX_FIMC_IS] = NULL;
+				p_isp->in_use = false;
+				break;
+			}
+		}
+	}
+	return ret == -ENXIO ? 0 : ret;
+}
+
+/**
+ * __fimc_pipeline_s_stream - call s_stream() on pipeline subdevs
+ * @pipeline: video pipeline structure
+ * @on: passed as the s_stream() callback argument
+ */
+static int __fimc_pipeline_s_stream(struct exynos_media_pipeline *ep, bool on)
+{
+	struct fimc_pipeline *p = to_fimc_pipeline(ep);
+	int i, ret;
+
+	if (p->subdevs[IDX_SENSOR] == NULL)
+		return -ENODEV;
+
+	for (i = 0; i < IDX_MAX; i++) {
+		unsigned int idx = on ? i : (IDX_MAX - 1) - i;
+
+		ret = v4l2_subdev_call(p->subdevs[idx], video, s_stream, on);
+
+		if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+			return ret;
+	}
+	return 0;
+}
+
+/* Media pipeline operations for the FIMC/FIMC-LITE video device driver */
+static const struct exynos_media_pipeline_ops exynos5_pipeline0_ops = {
+	.open		= __fimc_pipeline_open,
+	.close		= __fimc_pipeline_close,
+	.set_stream	= __fimc_pipeline_s_stream,
+};
+
+static struct exynos_media_pipeline *fimc_md_pipeline_create(
+						struct fimc_md *fmd)
+{
+	struct fimc_pipeline *p;
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return NULL;
+
+	list_add_tail(&p->list, &fmd->pipelines);
+
+	p->isp_pipelines = &fmd->isp_pipelines;
+	p->ep.ops = &exynos5_pipeline0_ops;
+	return &p->ep;
+}
+
+static struct exynos_media_pipeline *fimc_md_isp_pipeline_create(
+						struct fimc_md *fmd)
+{
+	struct fimc_pipeline_isp *p;
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return NULL;
+
+	list_add_tail(&p->list, &fmd->isp_pipelines);
+
+	p->in_use = false;
+	return &p->ep;
+}
+
+static void fimc_md_pipelines_free(struct fimc_md *fmd)
+{
+	while (!list_empty(&fmd->pipelines)) {
+		struct fimc_pipeline *p;
+
+		p = list_entry(fmd->pipelines.next, typeof(*p), list);
+		list_del(&p->list);
+		kfree(p);
+	}
+	while (!list_empty(&fmd->isp_pipelines)) {
+		struct fimc_pipeline_isp *p;
+
+		p = list_entry(fmd->isp_pipelines.next, typeof(*p), list);
+		list_del(&p->list);
+		kfree(p);
+	}
+}
+
+/* Parse port node and register as a sub-device any sensor specified there. */
+static int fimc_md_parse_port_node(struct fimc_md *fmd,
+				   struct device_node *port,
+				   unsigned int index)
+{
+	struct device_node *rem, *ep, *np;
+	struct fimc_source_info *pd;
+	struct v4l2_of_endpoint endpoint;
+
+	pd = &fmd->sensor[index].pdata;
+
+	/* Assume here a port node can have only one endpoint node. */
+	ep = of_get_next_child(port, NULL);
+	if (!ep)
+		return 0;
+
+	v4l2_of_parse_endpoint(ep, &endpoint);
+	if (WARN_ON(endpoint.port == 0) || index >= FIMC_MAX_SENSORS)
+		return -EINVAL;
+
+	pd->mux_id = (endpoint.port - 1) & 0x1;
+
+	rem = v4l2_of_get_remote_port_parent(ep);
+	of_node_put(ep);
+	if (rem == NULL) {
+		v4l2_info(&fmd->v4l2_dev, "Remote device at %s not found\n",
+							ep->full_name);
+		return 0;
+	}
+
+	if (fimc_input_is_parallel(endpoint.port)) {
+		if (endpoint.bus_type == V4L2_MBUS_PARALLEL)
+			pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_601;
+		else
+			pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_656;
+		pd->flags = endpoint.bus.parallel.flags;
+	} else if (fimc_input_is_mipi_csi(endpoint.port)) {
+		/*
+		 * MIPI CSI-2: only input mux selection and
+		 * the sensor's clock frequency is needed.
+		 */
+		pd->sensor_bus_type = FIMC_BUS_TYPE_MIPI_CSI2;
+	} else {
+		v4l2_err(&fmd->v4l2_dev, "Wrong port id (%u) at node %s\n",
+			 endpoint.port, rem->full_name);
+	}
+
+	np = of_get_parent(rem);
+
+	if (np && !of_node_cmp(np->name, "i2c-isp"))
+		pd->fimc_bus_type = FIMC_BUS_TYPE_ISP_WRITEBACK;
+	else
+		pd->fimc_bus_type = pd->sensor_bus_type;
+
+	if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor)))
+		return -EINVAL;
+
+	fmd->sensor[index].asd.match_type = V4L2_ASYNC_MATCH_OF;
+	fmd->sensor[index].asd.match.of.node = rem;
+	fmd->async_subdevs[index] = &fmd->sensor[index].asd;
+
+	fmd->num_sensors++;
+
+	of_node_put(rem);
+	return 0;
+}
+
+/* Register all SoC external sub-devices */
+static int fimc_md_of_sensors_register(struct fimc_md *fmd,
+				       struct device_node *np)
+{
+	struct device_node *parent = fmd->pdev->dev.of_node;
+	struct device_node *node, *ports;
+	int index = 0;
+	int ret;
+
+	/* Attach sensors linked to MIPI CSI-2 receivers */
+	for_each_available_child_of_node(parent, node) {
+		struct device_node *port;
+
+		if (of_node_cmp(node->name, "csis"))
+			continue;
+		/* The csis node can have only port subnode. */
+		port = of_get_next_child(node, NULL);
+		if (!port)
+			continue;
+
+		ret = fimc_md_parse_port_node(fmd, port, index);
+		if (ret < 0)
+			return ret;
+		index++;
+	}
+
+	/* Attach sensors listed in the parallel-ports node */
+	ports = of_get_child_by_name(parent, "parallel-ports");
+	if (!ports)
+		return 0;
+
+	for_each_child_of_node(ports, node) {
+		ret = fimc_md_parse_port_node(fmd, node, index);
+		if (ret < 0)
+			break;
+		index++;
+	}
+
+	return 0;
+}
+
+static int __of_get_csis_id(struct device_node *np)
+{
+	u32 reg = 0;
+
+	np = of_get_child_by_name(np, "port");
+	if (!np)
+		return -EINVAL;
+	of_property_read_u32(np, "reg", &reg);
+	return reg - FIMC_INPUT_MIPI_CSI2_0;
+}
+
+/*
+ * MIPI-CSIS, FIMC-IS and FIMC-LITE platform devices registration.
+ */
+
+static int register_fimc_lite_entity(struct fimc_md *fmd,
+				     struct fimc_lite *fimc_lite)
+{
+	struct v4l2_subdev *sd;
+	struct exynos_media_pipeline *ep;
+	int ret;
+
+	if (WARN_ON(fimc_lite->index >= FIMC_LITE_MAX_DEVS ||
+		    fmd->fimc_lite[fimc_lite->index]))
+		return -EBUSY;
+
+	sd = &fimc_lite->subdev;
+	sd->grp_id = GRP_ID_FLITE;
+
+	ep = fimc_md_pipeline_create(fmd);
+	if (!ep)
+		return -ENOMEM;
+
+	v4l2_set_subdev_hostdata(sd, ep);
+
+	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
+	if (!ret)
+		fmd->fimc_lite[fimc_lite->index] = fimc_lite;
+	else
+		v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.LITE%d\n",
+			 fimc_lite->index);
+	return ret;
+}
+
+static int register_csis_entity(struct fimc_md *fmd,
+				struct platform_device *pdev,
+				struct v4l2_subdev *sd)
+{
+	struct device_node *node = pdev->dev.of_node;
+	int id, ret;
+
+	id = node ? __of_get_csis_id(node) : max(0, pdev->id);
+
+	if (WARN_ON(id < 0 || id >= CSIS_MAX_ENTITIES))
+		return -ENOENT;
+
+	if (WARN_ON(fmd->csis[id].sd))
+		return -EBUSY;
+
+	sd->grp_id = GRP_ID_CSIS;
+	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
+	if (!ret)
+		fmd->csis[id].sd = sd;
+	else
+		v4l2_err(&fmd->v4l2_dev,
+			 "Failed to register MIPI-CSIS.%d (%d)\n", id, ret);
+	return ret;
+}
+
+static int register_fimc_is_entity(struct fimc_md *fmd,
+				     struct fimc_is *is)
+{
+	struct v4l2_subdev *isp, *scc, *scp;
+	struct exynos_media_pipeline *ep;
+	struct fimc_pipeline_isp *p;
+	struct video_device *vdev;
+	int ret, i;
+
+	for (i = 0; i < is->drvdata->num_instance; i++) {
+		isp = fimc_is_isp_get_sd(is, i);
+		scc = fimc_is_scc_get_sd(is, i);
+		scp = fimc_is_scp_get_sd(is, i);
+		isp->grp_id = GRP_ID_FIMC_IS;
+		scc->grp_id = GRP_ID_FIMC_IS;
+		scp->grp_id = GRP_ID_FIMC_IS;
+
+		ep = fimc_md_isp_pipeline_create(fmd);
+		if (!ep)
+			return -ENOMEM;
+
+		v4l2_set_subdev_hostdata(isp, ep);
+		v4l2_set_subdev_hostdata(scc, ep);
+		v4l2_set_subdev_hostdata(scp, ep);
+
+		ret = v4l2_device_register_subdev(&fmd->v4l2_dev, isp);
+		if (ret)
+			v4l2_err(&fmd->v4l2_dev,
+					"Failed to register ISP subdev\n");
+
+		ret = v4l2_device_register_subdev(&fmd->v4l2_dev, scc);
+		if (ret)
+			v4l2_err(&fmd->v4l2_dev,
+					"Failed to register SCC subdev\n");
+
+		ret = v4l2_device_register_subdev(&fmd->v4l2_dev, scp);
+		if (ret)
+			v4l2_err(&fmd->v4l2_dev,
+					"Failed to register SCP subdev\n");
+
+		p = to_fimc_isp_pipeline(ep);
+		p->subdevs[IDX_ISP] = isp;
+		p->subdevs[IDX_SCC] = scc;
+		p->subdevs[IDX_SCP] = scp;
+
+		/* Create default links */
+		/* vdev -> ISP */
+		vdev = fimc_is_isp_get_vfd(is, i);
+		ret = media_entity_create_link(&isp->entity,
+					ISP_SD_PAD_SINK_DMA,
+					&vdev->entity, 0,
+					MEDIA_LNK_FL_IMMUTABLE |
+					MEDIA_LNK_FL_ENABLED);
+		if (ret)
+			return ret;
+
+		/* ISP -> SCC */
+		ret = media_entity_create_link(&isp->entity,
+					ISP_SD_PAD_SRC,
+					&scc->entity, SCALER_SD_PAD_SINK,
+					MEDIA_LNK_FL_IMMUTABLE |
+					MEDIA_LNK_FL_ENABLED);
+		if (ret)
+			return ret;
+
+		/* SCC -> SCP */
+		ret = media_entity_create_link(&scc->entity,
+					SCALER_SD_PAD_SRC_FIFO,
+					&scp->entity, SCALER_SD_PAD_SINK,
+					MEDIA_LNK_FL_IMMUTABLE |
+					MEDIA_LNK_FL_ENABLED);
+		if (ret)
+			return ret;
+
+		/* SCC -> vdev */
+		vdev = fimc_is_scc_get_vfd(is, i);
+		ret = media_entity_create_link(&scc->entity,
+					SCALER_SD_PAD_SRC_DMA,
+					&vdev->entity, 0,
+					MEDIA_LNK_FL_IMMUTABLE |
+					MEDIA_LNK_FL_ENABLED);
+		if (ret)
+			return ret;
+
+		/* SCP -> vdev */
+		vdev = fimc_is_scp_get_vfd(is, i);
+		ret = media_entity_create_link(&scp->entity,
+					SCALER_SD_PAD_SRC_DMA,
+					&vdev->entity, 0,
+					MEDIA_LNK_FL_IMMUTABLE |
+					MEDIA_LNK_FL_ENABLED);
+		if (ret)
+			return ret;
+	}
+	fmd->is = is;
+
+	return ret;
+}
+
+static int fimc_md_register_platform_entity(struct fimc_md *fmd,
+					    struct platform_device *pdev,
+					    int plat_entity)
+{
+	struct device *dev = &pdev->dev;
+	int ret = -EPROBE_DEFER;
+	void *drvdata;
+
+	/* Lock to ensure dev->driver won't change. */
+	device_lock(dev);
+
+	if (!dev->driver || !try_module_get(dev->driver->owner))
+		goto dev_unlock;
+
+	drvdata = dev_get_drvdata(dev);
+	/* Some subdev didn't probe succesfully id drvdata is NULL */
+	if (drvdata) {
+		switch (plat_entity) {
+		case IDX_FLITE:
+			ret = register_fimc_lite_entity(fmd, drvdata);
+			break;
+		case IDX_CSIS:
+			ret = register_csis_entity(fmd, pdev, drvdata);
+			break;
+		case IDX_FIMC_IS:
+			ret = register_fimc_is_entity(fmd, drvdata);
+			break;
+		default:
+			ret = -ENODEV;
+		}
+	}
+
+	module_put(dev->driver->owner);
+dev_unlock:
+	device_unlock(dev);
+	if (ret == -EPROBE_DEFER)
+		dev_info(&fmd->pdev->dev, "deferring %s device registration\n",
+			dev_name(dev));
+	else if (ret < 0)
+		dev_err(&fmd->pdev->dev, "%s device registration failed (%d)\n",
+			dev_name(dev), ret);
+	return ret;
+}
+
+/* Register FIMC, FIMC-LITE and CSIS media entities */
+static int fimc_md_register_of_platform_entities(struct fimc_md *fmd,
+						 struct device_node *parent)
+{
+	struct device_node *node;
+	int ret = 0;
+
+	for_each_available_child_of_node(parent, node) {
+		struct platform_device *pdev;
+		int plat_entity = -1;
+
+		pdev = of_find_device_by_node(node);
+		if (!pdev)
+			continue;
+
+		/* If driver of any entity isn't ready try all again later. */
+		if (!strcmp(node->name, CSIS_OF_NODE_NAME))
+			plat_entity = IDX_CSIS;
+		else if (!strcmp(node->name, FIMC_LITE_OF_NODE_NAME))
+			plat_entity = IDX_FLITE;
+		else if (!strcmp(node->name, FIMC_IS_OF_NODE_NAME))
+			plat_entity = IDX_FIMC_IS;
+
+		if (plat_entity >= 0)
+			ret = fimc_md_register_platform_entity(fmd, pdev,
+							plat_entity);
+		put_device(&pdev->dev);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static void fimc_md_unregister_entities(struct fimc_md *fmd)
+{
+	int i;
+	struct fimc_is *is;
+
+	for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) {
+		if (fmd->fimc_lite[i] == NULL)
+			continue;
+		v4l2_device_unregister_subdev(&fmd->fimc_lite[i]->subdev);
+		fmd->fimc_lite[i] = NULL;
+	}
+	for (i = 0; i < CSIS_MAX_ENTITIES; i++) {
+		if (fmd->csis[i].sd == NULL)
+			continue;
+		v4l2_device_unregister_subdev(fmd->csis[i].sd);
+		module_put(fmd->csis[i].sd->owner);
+		fmd->csis[i].sd = NULL;
+	}
+	for (i = 0; i < fmd->num_sensors; i++)
+		fmd->sensor[i].subdev = NULL;
+
+	if (!fmd->is)
+		return;
+	/* Unregistering FIMC-IS entities */
+	is = fmd->is;
+	for (i = 0; i < is->drvdata->num_instance; i++) {
+		struct v4l2_subdev *isp, *scc, *scp;
+
+		isp = fimc_is_isp_get_sd(is, i);
+		scc = fimc_is_scc_get_sd(is, i);
+		scp = fimc_is_scp_get_sd(is, i);
+		v4l2_device_unregister_subdev(isp);
+		v4l2_device_unregister_subdev(scc);
+		v4l2_device_unregister_subdev(scp);
+	}
+
+	v4l2_info(&fmd->v4l2_dev, "Unregistered all entities\n");
+}
+
+/**
+ * __fimc_md_create_fimc_links - create links to all FIMC entities
+ * @fmd: fimc media device
+ * @source: the source entity to create links to all fimc entities from
+ * @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null
+ * @pad: the source entity pad index
+ * @link_mask: bitmask of the fimc devices for which link should be enabled
+ */
+static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd,
+					    struct media_entity *source,
+					    struct v4l2_subdev *sensor,
+					    int pad, int link_mask)
+{
+	struct fimc_source_info *si = NULL;
+	struct media_entity *sink;
+	unsigned int flags = 0;
+	int i, ret = 0;
+
+	if (sensor) {
+		si = v4l2_get_subdev_hostdata(sensor);
+		/* Skip direct FIMC links in the logical FIMC-IS sensor path */
+		if (si && si->fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK)
+			ret = 1;
+	}
+
+	for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) {
+		if (!fmd->fimc_lite[i])
+			continue;
+
+		flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0;
+
+		sink = &fmd->fimc_lite[i]->subdev.entity;
+		ret = media_entity_create_link(source, pad, sink,
+					       FLITE_SD_PAD_SINK, flags);
+		if (ret)
+			return ret;
+
+		/* Notify FIMC-LITE subdev entity */
+		ret = media_entity_call(sink, link_setup, &sink->pads[0],
+					&source->pads[pad], flags);
+		if (ret)
+			break;
+
+		v4l2_info(&fmd->v4l2_dev, "created link [%s] -> [%s]\n",
+			  source->name, sink->name);
+	}
+	return 0;
+}
+
+/* Create links from FIMC-LITE source pads to other entities */
+static int __fimc_md_create_flite_source_links(struct fimc_md *fmd)
+{
+	struct media_entity *source, *sink;
+	int i, ret = 0;
+
+	for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) {
+		struct fimc_lite *fimc = fmd->fimc_lite[i];
+
+		if (fimc == NULL)
+			continue;
+
+		source = &fimc->subdev.entity;
+		sink = &fimc->ve.vdev.entity;
+		/* FIMC-LITE's subdev and video node */
+		ret = media_entity_create_link(source, FLITE_SD_PAD_SOURCE_DMA,
+					       sink, 0,
+					       MEDIA_LNK_FL_IMMUTABLE |
+					       MEDIA_LNK_FL_ENABLED);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/**
+ * fimc_md_create_links - create default links between registered entities
+ *
+ * Parallel interface sensor entities are connected directly to FIMC capture
+ * entities. The sensors using MIPI CSIS bus are connected through immutable
+ * link with CSI receiver entity specified by mux_id. Any registered CSIS
+ * entity has a link to each registered FIMC capture entity. Enabled links
+ * are created by default between each subsequent registered sensor and
+ * subsequent FIMC capture entity. The number of default active links is
+ * determined by the number of available sensors or FIMC entities,
+ * whichever is less.
+ */
+static int fimc_md_create_links(struct fimc_md *fmd)
+{
+	struct v4l2_subdev *csi_sensors[CSIS_MAX_ENTITIES] = { NULL };
+	struct v4l2_subdev *sensor, *csis;
+	struct fimc_source_info *pdata;
+	struct media_entity *source;
+	int i, pad, fimc_id = 0, ret = 0;
+	u32 flags, link_mask = 0;
+
+	for (i = 0; i < fmd->num_sensors; i++) {
+		if (fmd->sensor[i].subdev == NULL)
+			continue;
+
+		sensor = fmd->sensor[i].subdev;
+		pdata = v4l2_get_subdev_hostdata(sensor);
+		if (!pdata)
+			continue;
+
+		source = NULL;
+
+		switch (pdata->sensor_bus_type) {
+		case FIMC_BUS_TYPE_MIPI_CSI2:
+			if (WARN(pdata->mux_id >= CSIS_MAX_ENTITIES,
+				"Wrong CSI channel id: %d\n", pdata->mux_id))
+				return -EINVAL;
+
+			csis = fmd->csis[pdata->mux_id].sd;
+			if (WARN(csis == NULL,
+				 "MIPI-CSI interface specified "
+				 "but s5p-csis module is not loaded!\n"))
+				return -EINVAL;
+
+			pad = sensor->entity.num_pads - 1;
+			ret = media_entity_create_link(&sensor->entity, pad,
+					      &csis->entity, CSIS_PAD_SINK,
+					      MEDIA_LNK_FL_IMMUTABLE |
+					      MEDIA_LNK_FL_ENABLED);
+			if (ret)
+				return ret;
+
+			v4l2_info(&fmd->v4l2_dev, "created link [%s] => [%s]\n",
+				  sensor->entity.name, csis->entity.name);
+
+			source = NULL;
+			csi_sensors[pdata->mux_id] = sensor;
+			break;
+
+		case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656:
+			source = &sensor->entity;
+			pad = 0;
+			break;
+
+		default:
+			v4l2_err(&fmd->v4l2_dev, "Wrong bus_type: %x\n",
+				 pdata->sensor_bus_type);
+			return -EINVAL;
+		}
+		if (source == NULL)
+			continue;
+
+		link_mask = 1 << fimc_id++;
+		ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor,
+						       pad, link_mask);
+	}
+
+	for (i = 0; i < CSIS_MAX_ENTITIES; i++) {
+		if (fmd->csis[i].sd == NULL)
+			continue;
+
+		source = &fmd->csis[i].sd->entity;
+		pad = CSIS_PAD_SOURCE;
+		sensor = csi_sensors[i];
+
+		link_mask = 1 << fimc_id++;
+		ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor,
+						       pad, link_mask);
+	}
+
+	/*
+	 * Create immutable links between each FIMC-LITE's subdev
+	 * and video node
+	 */
+	flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED;
+
+	ret = __fimc_md_create_flite_source_links(fmd);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int __fimc_md_modify_pipeline(struct media_entity *entity, bool enable)
+{
+	struct exynos_video_entity *ve;
+	struct fimc_pipeline *p;
+	struct video_device *vdev;
+	int ret;
+
+	vdev = media_entity_to_video_device(entity);
+	if (vdev->entity.use_count == 0)
+		return 0;
+
+	ve = vdev_to_exynos_video_entity(vdev);
+	p = to_fimc_pipeline(ve->pipe);
+	/*
+	 * Nothing to do if we are disabling the pipeline, some link
+	 * has been disconnected and p->subdevs array is cleared now.
+	 */
+	if (!enable && p->subdevs[IDX_SENSOR] == NULL)
+		return 0;
+
+	if (enable)
+		ret = __fimc_pipeline_open(ve->pipe, entity, true);
+	else
+		ret = __fimc_pipeline_close(ve->pipe);
+
+	if (ret == 0 && !enable)
+		memset(p->subdevs, 0, sizeof(p->subdevs));
+
+	return ret;
+}
+
+/* Locking: called with entity->parent->graph_mutex mutex held. */
+static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable)
+{
+	struct media_entity *entity_err = entity;
+	struct media_entity_graph graph;
+	int ret;
+
+	/*
+	 * Walk current graph and call the pipeline open/close routine for each
+	 * opened video node that belongs to the graph of entities connected
+	 * through active links. This is needed as we cannot power on/off the
+	 * subdevs in random order.
+	 */
+	media_entity_graph_walk_start(&graph, entity);
+
+	while ((entity = media_entity_graph_walk_next(&graph))) {
+		if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE)
+			continue;
+
+		ret  = __fimc_md_modify_pipeline(entity, enable);
+
+		if (ret < 0)
+			goto err;
+	}
+
+	return 0;
+ err:
+	media_entity_graph_walk_start(&graph, entity_err);
+
+	while ((entity_err = media_entity_graph_walk_next(&graph))) {
+		if (media_entity_type(entity_err) != MEDIA_ENT_T_DEVNODE)
+			continue;
+
+		__fimc_md_modify_pipeline(entity_err, !enable);
+
+		if (entity_err == entity)
+			break;
+	}
+
+	return ret;
+}
+
+static int fimc_md_link_notify(struct media_link *link, unsigned int flags,
+				unsigned int notification)
+{
+	struct media_entity *sink = link->sink->entity;
+	int ret = 0;
+
+	/* Before link disconnection */
+	if (notification == MEDIA_DEV_NOTIFY_PRE_LINK_CH) {
+		if (!(flags & MEDIA_LNK_FL_ENABLED))
+			ret = __fimc_md_modify_pipelines(sink, false);
+		else
+			; /* TODO: Link state change validation */
+	/* After link activation */
+	} else if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH &&
+		   (link->flags & MEDIA_LNK_FL_ENABLED)) {
+		ret = __fimc_md_modify_pipelines(sink, true);
+	}
+
+	return ret ? -EPIPE : 0;
+}
+
+static int subdev_notifier_bound(struct v4l2_async_notifier *notifier,
+				 struct v4l2_subdev *subdev,
+				 struct v4l2_async_subdev *asd)
+{
+	struct fimc_md *fmd = notifier_to_fimc_md(notifier);
+	struct fimc_sensor_info *si = NULL;
+	int i;
+
+	/* Find platform data for this sensor subdev */
+	for (i = 0; i < ARRAY_SIZE(fmd->sensor); i++) {
+		if (fmd->sensor[i].asd.match.of.node == subdev->dev->of_node)
+			si = &fmd->sensor[i];
+	}
+
+	if (si == NULL)
+		return -EINVAL;
+
+	v4l2_set_subdev_hostdata(subdev, &si->pdata);
+
+	if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK)
+		subdev->grp_id = GRP_ID_FIMC_IS_SENSOR;
+	else
+		subdev->grp_id = GRP_ID_SENSOR;
+
+	si->subdev = subdev;
+
+	v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n",
+		  subdev->name, fmd->num_sensors);
+
+	fmd->num_sensors++;
+
+	return 0;
+}
+
+static int subdev_notifier_complete(struct v4l2_async_notifier *notifier)
+{
+	struct fimc_md *fmd = notifier_to_fimc_md(notifier);
+	int ret;
+
+	mutex_lock(&fmd->media_dev.graph_mutex);
+
+	ret = fimc_md_create_links(fmd);
+	if (ret < 0)
+		goto unlock;
+
+	ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
+unlock:
+	mutex_unlock(&fmd->media_dev.graph_mutex);
+	return ret;
+}
+
+static int fimc_md_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct v4l2_device *v4l2_dev;
+	struct fimc_md *fmd;
+	int ret;
+
+	fmd = devm_kzalloc(dev, sizeof(*fmd), GFP_KERNEL);
+	if (!fmd)
+		return -ENOMEM;
+
+	spin_lock_init(&fmd->slock);
+	fmd->pdev = pdev;
+	INIT_LIST_HEAD(&fmd->pipelines);
+	INIT_LIST_HEAD(&fmd->isp_pipelines);
+
+	strlcpy(fmd->media_dev.model, "SAMSUNG EXYNOS5 IS",
+		sizeof(fmd->media_dev.model));
+	fmd->media_dev.link_notify = fimc_md_link_notify;
+	fmd->media_dev.dev = dev;
+
+	v4l2_dev = &fmd->v4l2_dev;
+	v4l2_dev->mdev = &fmd->media_dev;
+	strlcpy(v4l2_dev->name, "exynos5-fimc-md", sizeof(v4l2_dev->name));
+
+	ret = v4l2_device_register(dev, &fmd->v4l2_dev);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
+		return ret;
+	}
+
+	ret = media_device_register(&fmd->media_dev);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev, "Failed to register media dev: %d\n", ret);
+		goto err_md;
+	}
+
+	fmd->clk_bayer = ERR_PTR(-EINVAL);
+	fmd->clk_bayer = clk_get(dev, BAYER_CLK_NAME);
+	if (IS_ERR(fmd->clk_bayer)) {
+		v4l2_err(v4l2_dev, "Failed to get clk: %s\n", BAYER_CLK_NAME);
+		goto err_md;
+	}
+
+	platform_set_drvdata(pdev, fmd);
+
+	/* Protect the media graph while we're registering entities */
+	mutex_lock(&fmd->media_dev.graph_mutex);
+
+	ret = fimc_md_register_of_platform_entities(fmd, dev->of_node);
+	if (ret)
+		goto err_unlock;
+
+	fmd->num_sensors = 0;
+	ret = fimc_md_of_sensors_register(fmd, dev->of_node);
+	if (ret)
+		goto err_unlock;
+
+	mutex_unlock(&fmd->media_dev.graph_mutex);
+
+	fmd->subdev_notifier.subdevs = fmd->async_subdevs;
+	fmd->subdev_notifier.num_subdevs = fmd->num_sensors;
+	fmd->subdev_notifier.bound = subdev_notifier_bound;
+	fmd->subdev_notifier.complete = subdev_notifier_complete;
+	fmd->num_sensors = 0;
+
+	ret = v4l2_async_notifier_register(&fmd->v4l2_dev,
+					   &fmd->subdev_notifier);
+	if (ret)
+		goto err_clk;
+
+	return 0;
+
+err_unlock:
+	mutex_unlock(&fmd->media_dev.graph_mutex);
+err_clk:
+	clk_put(fmd->clk_bayer);
+	fimc_md_unregister_entities(fmd);
+	media_device_unregister(&fmd->media_dev);
+err_md:
+	v4l2_device_unregister(&fmd->v4l2_dev);
+	return ret;
+}
+
+static int fimc_md_remove(struct platform_device *pdev)
+{
+	struct fimc_md *fmd = platform_get_drvdata(pdev);
+
+	v4l2_async_notifier_unregister(&fmd->subdev_notifier);
+
+	fimc_md_unregister_entities(fmd);
+	fimc_md_pipelines_free(fmd);
+	media_device_unregister(&fmd->media_dev);
+	clk_put(fmd->clk_bayer);
+
+	return 0;
+}
+
+static const struct of_device_id fimc_md_of_match[] = {
+	{ .compatible = "samsung,exynos5250-fimc" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, fimc_md_of_match);
+
+static struct platform_driver fimc_md_driver = {
+	.probe		= fimc_md_probe,
+	.remove		= fimc_md_remove,
+	.driver = {
+		.of_match_table = fimc_md_of_match,
+		.name		= "exynos5-fimc-md",
+		.owner		= THIS_MODULE,
+	}
+};
+
+static int __init fimc_md_init(void)
+{
+	request_module("s5p-csis");
+	return platform_driver_register(&fimc_md_driver);
+}
+
+static void __exit fimc_md_exit(void)
+{
+	platform_driver_unregister(&fimc_md_driver);
+}
+
+module_init(fimc_md_init);
+module_exit(fimc_md_exit);
+
+MODULE_AUTHOR("Shaik Ameer Basha <shaik.ameer@samsung.com>");
+MODULE_DESCRIPTION("EXYNOS5 FIMC media device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/exynos5-is/exynos5-mdev.h b/drivers/media/platform/exynos5-is/exynos5-mdev.h
new file mode 100644
index 0000000..1b38a16
--- /dev/null
+++ b/drivers/media/platform/exynos5-is/exynos5-mdev.h
@@ -0,0 +1,164 @@ 
+/*
+ * Copyright (C) 2011 - 2012 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef EXYNOS5_MDEVICE_H_
+#define EXYNOS5_MDEVICE_H_
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/s5p_fimc.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "fimc-lite.h"
+#include "mipi-csis.h"
+
+#define FIMC_LITE_OF_NODE_NAME	"fimc-lite"
+#define CSIS_OF_NODE_NAME	"csis"
+#define FIMC_IS_OF_NODE_NAME	"fimc-is"
+
+#define FIMC_MAX_SENSORS	4
+
+enum fimc_subdev_index {
+	IDX_SENSOR,
+	IDX_CSIS,
+	IDX_FLITE,
+	IDX_FIMC_IS,
+	IDX_MAX,
+};
+
+enum fimc_isp_subdev_index {
+	IDX_ISP,
+	IDX_SCC,
+	IDX_SCP,
+	IDX_IS_MAX,
+};
+
+struct fimc_pipeline {
+	struct exynos_media_pipeline ep;
+	struct list_head list;
+	struct media_entity *vdev_entity;
+	struct v4l2_subdev *subdevs[IDX_MAX];
+	struct list_head *isp_pipelines;
+};
+
+struct fimc_pipeline_isp {
+	struct exynos_media_pipeline ep;
+	struct list_head list;
+	struct v4l2_subdev *subdevs[IDX_IS_MAX];
+	bool in_use;
+};
+
+struct fimc_csis_info {
+	struct v4l2_subdev *sd;
+	int id;
+};
+
+/**
+ * struct fimc_sensor_info - image data source subdev information
+ * @pdata: sensor's atrributes passed as media device's platform data
+ * @asd: asynchronous subdev registration data structure
+ * @subdev: image sensor v4l2 subdev
+ * @host: fimc device the sensor is currently linked to
+ *
+ * This data structure applies to image sensor and the writeback subdevs.
+ */
+struct fimc_sensor_info {
+	struct fimc_source_info pdata;
+	struct v4l2_async_subdev asd;
+	struct v4l2_subdev *subdev;
+	struct fimc_dev *host;
+};
+
+/**
+ * struct fimc_md - fimc media device information
+ * @csis: MIPI CSIS subdevs data
+ * @sensor: array of registered sensor subdevs
+ * @num_sensors: actual number of registered sensors
+ * @bayer_clk: bus clk for external sensors
+ * @fimc: array of registered fimc devices
+ * @is: fimc-is data structure
+ * @media_dev: top level media device
+ * @v4l2_dev: top level v4l2_device holding up the subdevs
+ * @pdev: platform device this media device is hooked up into
+ * @user_subdev_api: true if subdevs are not configured by the host driver
+ * @slock: spinlock protecting @sensor array
+ */
+struct fimc_md {
+	struct fimc_csis_info csis[CSIS_MAX_ENTITIES];
+	struct fimc_sensor_info sensor[FIMC_MAX_SENSORS];
+	int num_sensors;
+	struct clk *clk_bayer;
+	struct fimc_lite *fimc_lite[FIMC_LITE_MAX_DEVS];
+	struct fimc_is *is;
+	struct media_device media_dev;
+	struct v4l2_device v4l2_dev;
+	struct platform_device *pdev;
+	struct v4l2_async_notifier subdev_notifier;
+	struct v4l2_async_subdev *async_subdevs[FIMC_MAX_SENSORS];
+
+	bool user_subdev_api;
+	spinlock_t slock;
+	struct list_head pipelines;
+	struct list_head isp_pipelines;
+};
+
+#define is_subdev_pad(pad) (pad == NULL || \
+	media_entity_type(pad->entity) == MEDIA_ENT_T_V4L2_SUBDEV)
+
+#define me_subtype(me) \
+	((me->type) & (MEDIA_ENT_TYPE_MASK | MEDIA_ENT_SUBTYPE_MASK))
+
+#define subdev_has_devnode(__sd) (__sd->flags & V4L2_SUBDEV_FL_HAS_DEVNODE)
+
+#define to_fimc_pipeline(_ep) container_of(_ep, struct fimc_pipeline, ep)
+#define to_fimc_isp_pipeline(_ep) \
+	container_of(_ep, struct fimc_pipeline_isp, ep)
+
+static inline struct fimc_md *entity_to_fimc_mdev(struct media_entity *me)
+{
+	return me->parent == NULL ? NULL :
+		container_of(me->parent, struct fimc_md, media_dev);
+}
+
+static inline struct fimc_md *notifier_to_fimc_md(struct v4l2_async_notifier *n)
+{
+	return container_of(n, struct fimc_md, subdev_notifier);
+}
+
+static inline void fimc_md_graph_lock(struct exynos_video_entity *ve)
+{
+	mutex_lock(&ve->vdev.entity.parent->graph_mutex);
+}
+
+static inline void fimc_md_graph_unlock(struct exynos_video_entity *ve)
+{
+	mutex_unlock(&ve->vdev.entity.parent->graph_mutex);
+}
+
+static inline bool fimc_md_is_isp_available(struct device_node *node)
+{
+	node = of_get_child_by_name(node, FIMC_IS_OF_NODE_NAME);
+	return node ? of_device_is_available(node) : false;
+}
+
+static inline struct v4l2_subdev *__fimc_md_get_subdev(
+				struct exynos_media_pipeline *ep,
+				unsigned int index)
+{
+	struct fimc_pipeline *p = to_fimc_pipeline(ep);
+
+	if (!p || index >= IDX_MAX)
+		return NULL;
+	else
+		return p->subdevs[index];
+}
+#endif