| Message ID | 1376455574-15560-3-git-send-email-arun.kk@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
W dniu 2013-08-14 06:46, Arun Kumar K pisze: > The patch adds the DT binding documentation for Samsung > Exynos5 SoC series imaging subsystem (FIMC-IS). > > Signed-off-by: Arun Kumar K <arun.kk@samsung.com> > Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > .../devicetree/bindings/media/exynos5-fimc-is.txt | 47 ++++++++++++++++++++ > 1 file changed, 47 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt > > diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt > new file mode 100644 > index 0000000..bfd36df > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt > @@ -0,0 +1,47 @@ > +Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS) > +------------------------------------------------------ > + > +The camera subsystem on Samsung Exynos5 SoC has some changes relative > +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and > +FIMC-LITE IPs but has a much improved version of FIMC-IS which can > +handle sensor controls and camera post-processing operations. The > +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many > +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two > +dedicated scalers (SCC and SCP). > + > +fimc-is node > +------------ > + > +Required properties: > + > +- compatible : must be "samsung,exynos5250-fimc-is" > +- reg : physical base address and size of the memory mapped > + registers > +- interrupt-parent : parent interrupt controller > +- interrupts : fimc-is interrupt to the parent combiner Is it really only one interrupt or two as in case of Exynos4x12 ? Also it's probably more appropriate to say "interrupt controller" instead of "combiner", not including details of the the FIMC-IS external interrupt controller in this binding. > +- clocks : list of clock specifiers, corresponding to entries in > + clock-names property; > +- clock-names : must contain "isp", "mcu_isp", "isp_div0", "isp_div1", > + "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries, > + matching entries in the clocks property. > +- pmu : phandle to the fimc-is pmu node describing the register > + base and size for FIMC-IS PMU. This property needs to be prefixed with "samsung,". > + > +i2c-isp (ISP I2C bus controller) nodes > +------------------------------------------ > + > +Required properties: > + > +- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212, > + Exynos4412 and Exynos5250 SoCs; > +- reg : physical base address and length of the registers set; > +- clocks : must contain gate clock specifier for this controller; > +- clock-names : must contain "i2c_isp" entry. > + > +For the i2c-isp node, it is required to specify a pinctrl state named "default", > +according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt. > + > +Device tree nodes of the image sensors' controlled directly by the FIMC-IS nit: As pointed out already there is no need for the apostrophe. > +firmware must be child nodes of their corresponding ISP I2C bus controller node. > +The data link of these image sensors must be specified using the common video > +interfaces bindings, defined in video-interfaces.txt. -- Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sylwester, On Thu, Aug 15, 2013 at 8:39 PM, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> wrote: > W dniu 2013-08-14 06:46, Arun Kumar K pisze: > >> The patch adds the DT binding documentation for Samsung >> Exynos5 SoC series imaging subsystem (FIMC-IS). >> >> Signed-off-by: Arun Kumar K <arun.kk@samsung.com> >> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> >> --- >> .../devicetree/bindings/media/exynos5-fimc-is.txt | 47 >> ++++++++++++++++++++ >> 1 file changed, 47 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/media/exynos5-fimc-is.txt >> >> diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt >> b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt >> new file mode 100644 >> index 0000000..bfd36df >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt >> @@ -0,0 +1,47 @@ >> +Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS) >> +------------------------------------------------------ >> + >> +The camera subsystem on Samsung Exynos5 SoC has some changes relative >> +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and >> +FIMC-LITE IPs but has a much improved version of FIMC-IS which can >> +handle sensor controls and camera post-processing operations. The >> +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many >> +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two >> +dedicated scalers (SCC and SCP). >> + >> +fimc-is node >> +------------ >> + >> +Required properties: >> + >> +- compatible : must be "samsung,exynos5250-fimc-is" >> +- reg : physical base address and size of the memory mapped >> + registers >> +- interrupt-parent : parent interrupt controller >> +- interrupts : fimc-is interrupt to the parent combiner > > > Is it really only one interrupt or two as in case of Exynos4x12 ? > Also it's probably more appropriate to say "interrupt controller" > instead of "combiner", not including details of the the FIMC-IS external > interrupt controller in this binding. > It needs only one interrupt and that is the one from A5 to main ARM processor. Will change it to controller. > >> +- clocks : list of clock specifiers, corresponding to entries >> in >> + clock-names property; >> +- clock-names : must contain "isp", "mcu_isp", "isp_div0", >> "isp_div1", >> + "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" >> entries, >> + matching entries in the clocks property. >> +- pmu : phandle to the fimc-is pmu node describing the >> register >> + base and size for FIMC-IS PMU. > > > This property needs to be prefixed with "samsung,". > Ok Regards Arun -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt new file mode 100644 index 0000000..bfd36df --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt @@ -0,0 +1,47 @@ +Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS) +------------------------------------------------------ + +The camera subsystem on Samsung Exynos5 SoC has some changes relative +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and +FIMC-LITE IPs but has a much improved version of FIMC-IS which can +handle sensor controls and camera post-processing operations. The +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two +dedicated scalers (SCC and SCP). + +fimc-is node +------------ + +Required properties: + +- compatible : must be "samsung,exynos5250-fimc-is" +- reg : physical base address and size of the memory mapped + registers +- interrupt-parent : parent interrupt controller +- interrupts : fimc-is interrupt to the parent combiner +- clocks : list of clock specifiers, corresponding to entries in + clock-names property; +- clock-names : must contain "isp", "mcu_isp", "isp_div0", "isp_div1", + "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries, + matching entries in the clocks property. +- pmu : phandle to the fimc-is pmu node describing the register + base and size for FIMC-IS PMU. + +i2c-isp (ISP I2C bus controller) nodes +------------------------------------------ + +Required properties: + +- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212, + Exynos4412 and Exynos5250 SoCs; +- reg : physical base address and length of the registers set; +- clocks : must contain gate clock specifier for this controller; +- clock-names : must contain "i2c_isp" entry. + +For the i2c-isp node, it is required to specify a pinctrl state named "default", +according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt. + +Device tree nodes of the image sensors' controlled directly by the FIMC-IS +firmware must be child nodes of their corresponding ISP I2C bus controller node. +The data link of these image sensors must be specified using the common video +interfaces bindings, defined in video-interfaces.txt.