| Message ID | 1394636208-3125-4-git-send-email-rahul.sharma@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Rahul, On 03/12/2014 11:56 PM, Rahul Sharma wrote: > Add support for pll2650xx in samsung pll file. This PLL variant > is close to pll36xx but uses CON2 registers instead of CON1. > > Aud_pll in Exynos5260 is pll2650xx and uses this code. > > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> > --- > drivers/clk/samsung/clk-pll.c | 101 +++++++++++++++++++++++++++++++++++++++++ > drivers/clk/samsung/clk-pll.h | 1 + > 2 files changed, 102 insertions(+) > > diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c > index 18e42ef..b07fad2 100644 > --- a/drivers/clk/samsung/clk-pll.c > +++ b/drivers/clk/samsung/clk-pll.c > @@ -1049,6 +1049,101 @@ static const struct clk_ops samsung_pll2550xx_clk_min_ops = { > .recalc_rate = samsung_pll2550xx_recalc_rate, > }; > > +/* > + * PLL2650XX Clock Type > + */ > + > +/* Maximum lock time can be 3000 * PDIV cycles */ > +#define PLL2650XX_LOCK_FACTOR 3000 > + > +#define PLL2650XX_MDIV_SHIFT 9 > +#define PLL2650XX_PDIV_SHIFT 3 > +#define PLL2650XX_SDIV_SHIFT 0 > +#define PLL2650XX_KDIV_SHIFT 0 > +#define PLL2650XX_MDIV_MASK 0x1ff > +#define PLL2650XX_PDIV_MASK 0x3f > +#define PLL2650XX_SDIV_MASK 0x7 > +#define PLL2650XX_KDIV_MASK 0xffff > +#define PLL2650XX_PLL_ENABLE_SHIFT 23 > +#define PLL2650XX_PLL_LOCKTIME_SHIFT 21 > +#define PLL2650XX_PLL_FOUTMASK_SHIFT 31 > + > +static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct samsung_clk_pll *pll = to_clk_pll(hw); > + u32 mdiv, pdiv, sdiv, pll_con0, pll_con2; > + s16 kdiv; > + u64 fvco = parent_rate; > + > + pll_con0 = __raw_readl(pll->con_reg); > + pll_con2 = __raw_readl(pll->con_reg + 8); > + mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK; > + pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK; > + sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK; > + kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK); > + > + fvco *= (mdiv << 16) + kdiv; > + do_div(fvco, (pdiv << sdiv)); > + fvco >>= 16; > + > + return (unsigned long)fvco; > +} > + > +static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate, > + unsigned long parent_rate) > +{ > + struct samsung_clk_pll *pll = to_clk_pll(hw); > + u32 tmp, pll_con0, pll_con2; > + const struct samsung_pll_rate_table *rate; > + > + rate = samsung_get_pll_settings(pll, drate); > + if (!rate) { > + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, > + drate, __clk_get_name(hw->clk)); > + return -EINVAL; > + } > + > + pll_con0 = __raw_readl(pll->con_reg); > + pll_con2 = __raw_readl(pll->con_reg + 8); > + > + /* Change PLL PMS values */ > + pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT | > + PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT | > + PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT); > + pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT; > + pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT; > + pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT; > + pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT; > + pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT; > + > + pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT); > + pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK) > + << PLL2650XX_KDIV_SHIFT; > + > + /* Set PLL lock time. */ > + __raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg); > + > + __raw_writel(pll_con0, pll->con_reg); > + __raw_writel(pll_con2, pll->con_reg + 8); > + > + do { > + tmp = __raw_readl(pll->con_reg); > + } while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT))); > + > + return 0; > +} > + > +static const struct clk_ops samsung_pll2650xx_clk_ops = { > + .recalc_rate = samsung_pll2650xx_recalc_rate, > + .set_rate = samsung_pll2650xx_set_rate, > + .round_rate = samsung_pll_round_rate, > +}; > + > +static const struct clk_ops samsung_pll2650xx_clk_min_ops = { > + .recalc_rate = samsung_pll2650xx_recalc_rate, > +}; > + > static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, > struct samsung_pll_clock *pll_clk, > void __iomem *base) > @@ -1157,6 +1252,12 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, > else > init.ops = &samsung_pll2550xx_clk_ops; > break; > + case pll_2650xx: > + if (!pll->rate_table) > + init.ops = &samsung_pll2650xx_clk_min_ops; > + else > + init.ops = &samsung_pll2650xx_clk_ops; > + break; > default: > pr_warn("%s: Unknown pll type for pll clk %s\n", > __func__, pll_clk->name); > diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h > index ec4bc1d..c0ed4d4 100644 > --- a/drivers/clk/samsung/clk-pll.h > +++ b/drivers/clk/samsung/clk-pll.h > @@ -32,6 +32,7 @@ enum samsung_pll_type { > pll_s3c2410_upll, > pll_s3c2440_mpll, > pll_2550xx, > + pll_2650xx, > }; > > #define PLL_35XX_RATE(_rate, _m, _p, _s) \ Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung,com <mailto:t.figa@samsung.com>>
On Thu, Mar 13, 2014 at 10:28 AM, Pankaj Dubey <pankaj.dubey@samsung.com> wrote: > Hi Rahul, > > > On 03/12/2014 11:56 PM, Rahul Sharma wrote: >> >> Add support for pll2650xx in samsung pll file. This PLL variant >> is close to pll36xx but uses CON2 registers instead of CON1. >> >> Aud_pll in Exynos5260 is pll2650xx and uses this code. >> >> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> >> --- >> drivers/clk/samsung/clk-pll.c | 101 >> +++++++++++++++++++++++++++++++++++++++++ >> drivers/clk/samsung/clk-pll.h | 1 + >> 2 files changed, 102 insertions(+) >> >> diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c >> index 18e42ef..b07fad2 100644 >> --- a/drivers/clk/samsung/clk-pll.c >> +++ b/drivers/clk/samsung/clk-pll.c >> @@ -1049,6 +1049,101 @@ static const struct clk_ops >> samsung_pll2550xx_clk_min_ops = { >> .recalc_rate = samsung_pll2550xx_recalc_rate, >> }; >> +/* >> + * PLL2650XX Clock Type >> + */ >> + >> +/* Maximum lock time can be 3000 * PDIV cycles */ >> +#define PLL2650XX_LOCK_FACTOR 3000 >> + >> +#define PLL2650XX_MDIV_SHIFT 9 >> +#define PLL2650XX_PDIV_SHIFT 3 >> +#define PLL2650XX_SDIV_SHIFT 0 >> +#define PLL2650XX_KDIV_SHIFT 0 >> +#define PLL2650XX_MDIV_MASK 0x1ff >> +#define PLL2650XX_PDIV_MASK 0x3f >> +#define PLL2650XX_SDIV_MASK 0x7 >> +#define PLL2650XX_KDIV_MASK 0xffff >> +#define PLL2650XX_PLL_ENABLE_SHIFT 23 >> +#define PLL2650XX_PLL_LOCKTIME_SHIFT 21 >> +#define PLL2650XX_PLL_FOUTMASK_SHIFT 31 >> + >> +static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw, >> + unsigned long parent_rate) >> +{ >> + struct samsung_clk_pll *pll = to_clk_pll(hw); >> + u32 mdiv, pdiv, sdiv, pll_con0, pll_con2; >> + s16 kdiv; >> + u64 fvco = parent_rate; >> + >> + pll_con0 = __raw_readl(pll->con_reg); >> + pll_con2 = __raw_readl(pll->con_reg + 8); >> + mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK; >> + pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK; >> + sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK; >> + kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK); >> + >> + fvco *= (mdiv << 16) + kdiv; >> + do_div(fvco, (pdiv << sdiv)); >> + fvco >>= 16; >> + >> + return (unsigned long)fvco; >> +} >> + >> +static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long >> drate, >> + unsigned long parent_rate) >> +{ >> + struct samsung_clk_pll *pll = to_clk_pll(hw); >> + u32 tmp, pll_con0, pll_con2; >> + const struct samsung_pll_rate_table *rate; >> + >> + rate = samsung_get_pll_settings(pll, drate); >> + if (!rate) { >> + pr_err("%s: Invalid rate : %lu for pll clk %s\n", >> __func__, >> + drate, __clk_get_name(hw->clk)); >> + return -EINVAL; >> + } >> + >> + pll_con0 = __raw_readl(pll->con_reg); >> + pll_con2 = __raw_readl(pll->con_reg + 8); >> + >> + /* Change PLL PMS values */ >> + pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT | >> + PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT | >> + PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT); >> + pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT; >> + pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT; >> + pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT; >> + pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT; >> + pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT; >> + >> + pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT); >> + pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK) >> + << PLL2650XX_KDIV_SHIFT; >> + >> + /* Set PLL lock time. */ >> + __raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg); >> + >> + __raw_writel(pll_con0, pll->con_reg); >> + __raw_writel(pll_con2, pll->con_reg + 8); >> + >> + do { >> + tmp = __raw_readl(pll->con_reg); >> + } while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT))); >> + >> + return 0; >> +} >> + >> +static const struct clk_ops samsung_pll2650xx_clk_ops = { >> + .recalc_rate = samsung_pll2650xx_recalc_rate, >> + .set_rate = samsung_pll2650xx_set_rate, >> + .round_rate = samsung_pll_round_rate, >> +}; >> + >> +static const struct clk_ops samsung_pll2650xx_clk_min_ops = { >> + .recalc_rate = samsung_pll2650xx_recalc_rate, >> +}; >> + >> static void __init _samsung_clk_register_pll(struct samsung_clk_provider >> *ctx, >> struct samsung_pll_clock *pll_clk, >> void __iomem *base) >> @@ -1157,6 +1252,12 @@ static void __init _samsung_clk_register_pll(struct >> samsung_clk_provider *ctx, >> else >> init.ops = &samsung_pll2550xx_clk_ops; >> break; >> + case pll_2650xx: >> + if (!pll->rate_table) >> + init.ops = &samsung_pll2650xx_clk_min_ops; >> + else >> + init.ops = &samsung_pll2650xx_clk_ops; >> + break; >> default: >> pr_warn("%s: Unknown pll type for pll clk %s\n", >> __func__, pll_clk->name); >> diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h >> index ec4bc1d..c0ed4d4 100644 >> --- a/drivers/clk/samsung/clk-pll.h >> +++ b/drivers/clk/samsung/clk-pll.h >> @@ -32,6 +32,7 @@ enum samsung_pll_type { >> pll_s3c2410_upll, >> pll_s3c2440_mpll, >> pll_2550xx, >> + pll_2650xx, >> }; >> #define PLL_35XX_RATE(_rate, _m, _p, _s) \ > > > Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> > > -- > Best Regards, > Pankaj Dubey > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rahul, On 12.03.2014 15:56, Rahul Sharma wrote: > Add support for pll2650xx in samsung pll file. This PLL variant > is close to pll36xx but uses CON2 registers instead of CON1. > > Aud_pll in Exynos5260 is pll2650xx and uses this code. > > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> > --- > drivers/clk/samsung/clk-pll.c | 101 +++++++++++++++++++++++++++++++++++++++++ > drivers/clk/samsung/clk-pll.h | 1 + > 2 files changed, 102 insertions(+) Applied with Pankaj's reviewed-by, thanks. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 18e42ef..b07fad2 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -1049,6 +1049,101 @@ static const struct clk_ops samsung_pll2550xx_clk_min_ops = { .recalc_rate = samsung_pll2550xx_recalc_rate, }; +/* + * PLL2650XX Clock Type + */ + +/* Maximum lock time can be 3000 * PDIV cycles */ +#define PLL2650XX_LOCK_FACTOR 3000 + +#define PLL2650XX_MDIV_SHIFT 9 +#define PLL2650XX_PDIV_SHIFT 3 +#define PLL2650XX_SDIV_SHIFT 0 +#define PLL2650XX_KDIV_SHIFT 0 +#define PLL2650XX_MDIV_MASK 0x1ff +#define PLL2650XX_PDIV_MASK 0x3f +#define PLL2650XX_SDIV_MASK 0x7 +#define PLL2650XX_KDIV_MASK 0xffff +#define PLL2650XX_PLL_ENABLE_SHIFT 23 +#define PLL2650XX_PLL_LOCKTIME_SHIFT 21 +#define PLL2650XX_PLL_FOUTMASK_SHIFT 31 + +static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 mdiv, pdiv, sdiv, pll_con0, pll_con2; + s16 kdiv; + u64 fvco = parent_rate; + + pll_con0 = __raw_readl(pll->con_reg); + pll_con2 = __raw_readl(pll->con_reg + 8); + mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK; + kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK); + + fvco *= (mdiv << 16) + kdiv; + do_div(fvco, (pdiv << sdiv)); + fvco >>= 16; + + return (unsigned long)fvco; +} + +static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 tmp, pll_con0, pll_con2; + const struct samsung_pll_rate_table *rate; + + rate = samsung_get_pll_settings(pll, drate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, + drate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + pll_con0 = __raw_readl(pll->con_reg); + pll_con2 = __raw_readl(pll->con_reg + 8); + + /* Change PLL PMS values */ + pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT | + PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT | + PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT); + pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT; + pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT; + pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT; + pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT; + pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT; + + pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT); + pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK) + << PLL2650XX_KDIV_SHIFT; + + /* Set PLL lock time. */ + __raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg); + + __raw_writel(pll_con0, pll->con_reg); + __raw_writel(pll_con2, pll->con_reg + 8); + + do { + tmp = __raw_readl(pll->con_reg); + } while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT))); + + return 0; +} + +static const struct clk_ops samsung_pll2650xx_clk_ops = { + .recalc_rate = samsung_pll2650xx_recalc_rate, + .set_rate = samsung_pll2650xx_set_rate, + .round_rate = samsung_pll_round_rate, +}; + +static const struct clk_ops samsung_pll2650xx_clk_min_ops = { + .recalc_rate = samsung_pll2650xx_recalc_rate, +}; + static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, struct samsung_pll_clock *pll_clk, void __iomem *base) @@ -1157,6 +1252,12 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, else init.ops = &samsung_pll2550xx_clk_ops; break; + case pll_2650xx: + if (!pll->rate_table) + init.ops = &samsung_pll2650xx_clk_min_ops; + else + init.ops = &samsung_pll2650xx_clk_ops; + break; default: pr_warn("%s: Unknown pll type for pll clk %s\n", __func__, pll_clk->name); diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h index ec4bc1d..c0ed4d4 100644 --- a/drivers/clk/samsung/clk-pll.h +++ b/drivers/clk/samsung/clk-pll.h @@ -32,6 +32,7 @@ enum samsung_pll_type { pll_s3c2410_upll, pll_s3c2440_mpll, pll_2550xx, + pll_2650xx, }; #define PLL_35XX_RATE(_rate, _m, _p, _s) \
Add support for pll2650xx in samsung pll file. This PLL variant is close to pll36xx but uses CON2 registers instead of CON1. Aud_pll in Exynos5260 is pll2650xx and uses this code. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> --- drivers/clk/samsung/clk-pll.c | 101 +++++++++++++++++++++++++++++++++++++++++ drivers/clk/samsung/clk-pll.h | 1 + 2 files changed, 102 insertions(+)