diff mbox

[3/8] ARM: dts: imx6: update pcie to bring in line with new binding

Message ID 1396025579-14344-4-git-send-email-l.stach@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Lucas Stach March 28, 2014, 4:52 p.m. UTC
The new bindings drops one clock, renames the others and
drops the old interrupt mapping.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Shawn Guo April 30, 2014, 6:02 a.m. UTC | #1
On Fri, Mar 28, 2014 at 05:52:54PM +0100, Lucas Stach wrote:
> The new bindings drops one clock, renames the others and
> drops the old interrupt mapping.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

It does not apply on my branch, and I had to apply it manually.  Please
check my imx/dt branch to see if I did it right.

Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Lucas Stach April 30, 2014, 10:17 a.m. UTC | #2
Am Mittwoch, den 30.04.2014, 14:02 +0800 schrieb Shawn Guo:
> On Fri, Mar 28, 2014 at 05:52:54PM +0100, Lucas Stach wrote:
> > The new bindings drops one clock, renames the others and
> > drops the old interrupt mapping.
> > 
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> 
> It does not apply on my branch, and I had to apply it manually.  Please
> check my imx/dt branch to see if I did it right.
> 
The diff as applied in your imx/dt looks good to me.

Regards,
Lucas
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index c1c06d25decc..1ea1adb6d8c6 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -128,15 +128,16 @@ 
 				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
-			interrupts = <0 123 0x04>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 			                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 			                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 			                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
-			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+			clocks = <&clks 144>, <&clks 206>, <&clks 189>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
 			status = "disabled";
 		};