diff mbox

[V2,16/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory

Message ID 1396618989-2897-17-git-send-email-daniel.lezcano@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Daniel Lezcano April 4, 2014, 1:43 p.m. UTC
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-exynos/Makefile                      |    1 -
 drivers/cpuidle/Kconfig.arm                        |    7 +++++++
 drivers/cpuidle/Makefile                           |    1 +
 .../cpuidle.c => drivers/cpuidle/cpuidle-exynos.c  |    0
 4 files changed, 8 insertions(+), 1 deletion(-)
 rename arch/arm/mach-exynos/cpuidle.c => drivers/cpuidle/cpuidle-exynos.c (100%)

diff --git a/arch/arm/mach-exynos/cpuidle.c b/drivers/cpuidle/cpuidle-exynos.c
similarity index 100%
rename from arch/arm/mach-exynos/cpuidle.c
rename to drivers/cpuidle/cpuidle-exynos.c

Comments

Bartlomiej Zolnierkiewicz April 4, 2014, 3:36 p.m. UTC | #1
On Friday, April 04, 2014 03:43:08 PM Daniel Lezcano wrote:
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sachin Kamat April 7, 2014, 9:51 a.m. UTC | #2
Hi Daniel,

On 4 April 2014 19:13, Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-exynos/Makefile                      |    1 -
>  drivers/cpuidle/Kconfig.arm                        |    7 +++++++
>  drivers/cpuidle/Makefile                           |    1 +
>  .../cpuidle.c => drivers/cpuidle/cpuidle-exynos.c  |    0
>  4 files changed, 8 insertions(+), 1 deletion(-)
>  rename arch/arm/mach-exynos/cpuidle.c => drivers/cpuidle/cpuidle-exynos.c (100%)

This driver now references platform header file (plat/cpu.h) for some
Exynos5440 specific check
which is not good considering multiplatform support. Any plan to get
rid of this?
Daniel Lezcano April 7, 2014, 11:53 a.m. UTC | #3
On 04/07/2014 11:51 AM, Sachin Kamat wrote:
> Hi Daniel,
>
> On 4 April 2014 19:13, Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
>> ---
>>   arch/arm/mach-exynos/Makefile                      |    1 -
>>   drivers/cpuidle/Kconfig.arm                        |    7 +++++++
>>   drivers/cpuidle/Makefile                           |    1 +
>>   .../cpuidle.c => drivers/cpuidle/cpuidle-exynos.c  |    0
>>   4 files changed, 8 insertions(+), 1 deletion(-)
>>   rename arch/arm/mach-exynos/cpuidle.c => drivers/cpuidle/cpuidle-exynos.c (100%)
>
> This driver now references platform header file (plat/cpu.h) for some
> Exynos5440 specific check
> which is not good considering multiplatform support. Any plan to get
> rid of this?

Yes. Prevent to register the platform device for this board and remove 
these lines in the driver.

What is the benefit of having a single state WFI cpuidle driver ? That 
pulls all the governor computation and decision for nothing.
diff mbox

Patch

diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index a656dbe..21bd364 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -16,7 +16,6 @@  obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o
 
 obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
 
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index d988948..92f0c12 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -44,3 +44,10 @@  config ARM_AT91_CPUIDLE
 	depends on ARCH_AT91
 	help
 	  Select this to enable cpuidle for AT91 processors
+
+config ARM_EXYNOS_CPUIDLE
+	bool "Cpu Idle Driver for the Exynos processors"
+	default y
+	depends on ARCH_EXYNOS
+	help
+	  Select this to enable cpuidle for Exynos processors
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index f71ae1b..0d1540a 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -13,6 +13,7 @@  obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE)	+= cpuidle-kirkwood.o
 obj-$(CONFIG_ARM_ZYNQ_CPUIDLE)		+= cpuidle-zynq.o
 obj-$(CONFIG_ARM_U8500_CPUIDLE)         += cpuidle-ux500.o
 obj-$(CONFIG_ARM_AT91_CPUIDLE)          += cpuidle-at91.o
+obj-$(CONFIG_ARM_EXYNOS_CPUIDLE)        += cpuidle-exynos.o
 
 ###############################################################################
 # POWERPC drivers