new file mode 100644
@@ -0,0 +1,45 @@
+Simple panel interface for chaining along with bridges
+
+Required properties:
+ - compatible: "drm-bridge,panel"
+
+Optional properties:
+ -lcd-en-gpio:
+ eDP panel LCD poweron GPIO.
+ Indicates which GPIO needs to be powered up as output
+ to powerup/enable the switch to the LCD panel.
+ -led-en-gpio:
+ eDP panel LED enable GPIO.
+ Indicates which GPIO needs to be powered up as output
+ to enable the backlight.
+ -panel-pre-enable-delay:
+ delay value in ms required for panel_pre_enable process
+ Delay in ms needed for the eDP panel LCD unit to
+ powerup, and delay needed between panel_VCC and
+ video_enable.
+ -panel-enable-delay:
+ delay value in ms required for panel_enable process
+ Delay in ms needed for the eDP panel backlight/LED unit
+ to powerup, and delay needed between video_enable and
+ BL_EN.
+ -panel-disable-delay:
+ delay value in ms required for panel_disable process
+ Delay in ms needed for the eDP panel backlight/LED unit
+ powerdown, and delay needed between BL_DISABLE and
+ video_disable.
+ -panel-post-disable-delay:
+ delay value in ms required for panel_post_disable process
+ Delay in ms needed for the eDP panel LCD unit to
+ to powerdown, and delay between video_disable and
+ panel_VCC going down.
+
+Example:
+
+ bridge-panel {
+ compatible = "drm-bridge,panel";
+ led-en-gpio = <&gpx3 0 1>;
+ panel-pre-enable-delay = <40>;
+ panel-enable-delay = <20>;
+ panel-disable-delay = <20>;
+ panel-post-disable-delay = <30>;
+ };
@@ -3,3 +3,9 @@ config DRM_PTN3460
depends on DRM
select DRM_KMS_HELPER
---help---
+
+config DRM_BRIDGE_PANEL
+ tristate "dummy bridge panel"
+ depends on DRM
+ select DRM_KMS_HELPER
+ ---help---
@@ -1,3 +1,4 @@
ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_PTN3460) += ptn3460.o
+obj-$(CONFIG_DRM_BRIDGE_PANEL) += bridge_panel.o
new file mode 100644
@@ -0,0 +1,240 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+#include "drmP.h"
+
+#include "bridge/bridge_panel.h"
+
+enum panel_state {
+ PRE_ENABLE,
+ ENABLE,
+ DISABLE,
+ POST_DISABLE,
+};
+
+struct bridge_panel {
+ struct drm_connector connector;
+ struct i2c_client *client;
+ struct drm_encoder *encoder;
+ struct drm_bridge *bridge;
+ struct regulator *backlight_fet;
+ struct regulator *lcd_fet;
+ int led_en_gpio;
+ int lcd_en_gpio;
+ int panel_pre_enable_delay;
+ int panel_enable_delay;
+ int panel_disable_delay;
+ int panel_post_disable_delay;
+ enum panel_state panel_state;
+};
+
+static void bridge_panel_pre_enable(struct drm_bridge *bridge)
+{
+ struct bridge_panel *panel = bridge->driver_private;
+
+ if (panel->panel_state != POST_DISABLE) {
+ DRM_ERROR("invoking bridge_panel_pre_enable " \
+ "from an improper state\n");
+ return;
+ }
+
+ if (!IS_ERR_OR_NULL(panel->lcd_fet))
+ if (regulator_enable(panel->lcd_fet))
+ DRM_ERROR("Failed to enable LCD fet\n");
+
+ if (gpio_is_valid(panel->lcd_en_gpio))
+ gpio_set_value(panel->lcd_en_gpio, 1);
+
+ msleep(panel->panel_pre_enable_delay);
+
+ panel->panel_state = PRE_ENABLE;
+}
+
+static void bridge_panel_enable(struct drm_bridge *bridge)
+{
+ struct bridge_panel *panel = bridge->driver_private;
+
+ if (panel->panel_state != PRE_ENABLE) {
+ DRM_ERROR("invoking bridge_panel_enable " \
+ "from an improper state\n");
+ return;
+ }
+
+ if (!IS_ERR_OR_NULL(panel->backlight_fet))
+ if (regulator_enable(panel->backlight_fet))
+ DRM_ERROR("Failed to enable LED fet\n");
+
+ msleep(panel->panel_enable_delay);
+
+ if (gpio_is_valid(panel->led_en_gpio))
+ gpio_set_value(panel->led_en_gpio, 1);
+
+ panel->panel_state = ENABLE;
+
+}
+
+static void bridge_panel_disable(struct drm_bridge *bridge)
+{
+ struct bridge_panel *panel = bridge->driver_private;
+
+ if (panel->panel_state != ENABLE) {
+ DRM_ERROR("invoking bridge_panel_disable " \
+ "from an improper state\n");
+ return;
+ }
+
+ if (gpio_is_valid(panel->led_en_gpio))
+ gpio_set_value(panel->led_en_gpio, 0);
+
+ if (!IS_ERR_OR_NULL(panel->backlight_fet))
+ regulator_disable(panel->backlight_fet);
+
+ msleep(panel->panel_disable_delay);
+
+ panel->panel_state = DISABLE;
+}
+
+static void bridge_panel_post_disable(struct drm_bridge *bridge)
+{
+ struct bridge_panel *panel = bridge->driver_private;
+
+ if (panel->panel_state != DISABLE) {
+ DRM_ERROR("invoking bridge_panel_post_disable " \
+ "from an improper state\n");
+ return;
+ }
+
+ if (gpio_is_valid(panel->lcd_en_gpio))
+ gpio_set_value(panel->lcd_en_gpio, 0);
+
+ if (!IS_ERR_OR_NULL(panel->lcd_fet))
+ regulator_disable(panel->lcd_fet);
+
+ msleep(panel->panel_post_disable_delay);
+
+ panel->panel_state = POST_DISABLE;
+}
+
+void bridge_panel_destroy(struct drm_bridge *bridge)
+{
+ struct bridge_panel *panel = bridge->driver_private;
+
+ drm_bridge_cleanup(bridge);
+
+ if (gpio_is_valid(panel->lcd_en_gpio))
+ gpio_free(panel->lcd_en_gpio);
+ if (gpio_is_valid(panel->led_en_gpio))
+ gpio_free(panel->led_en_gpio);
+ /* Nothing else to free, we've got devm allocated memory */
+}
+
+struct drm_bridge_funcs bridge_panel_funcs = {
+ .pre_enable = bridge_panel_pre_enable,
+ .enable = bridge_panel_enable,
+ .disable = bridge_panel_disable,
+ .post_disable = bridge_panel_post_disable,
+ .destroy = bridge_panel_destroy,
+};
+
+int bridge_panel_init(struct drm_device *dev, struct drm_encoder *encoder,
+ struct i2c_client *client, struct device_node *node)
+{
+ int ret;
+ struct drm_bridge *bridge;
+ struct bridge_panel *panel;
+
+ bridge = devm_kzalloc(dev->dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge) {
+ DRM_ERROR("Failed to allocate drm bridge\n");
+ return -ENOMEM;
+ }
+
+ panel = devm_kzalloc(dev->dev, sizeof(*panel), GFP_KERNEL);
+ if (!panel) {
+ DRM_ERROR("Failed to allocate bridge panel\n");
+ return -ENOMEM;
+ }
+
+ panel->client = client;
+ panel->encoder = encoder;
+ panel->bridge = bridge;
+
+ panel->panel_state = POST_DISABLE;
+
+ panel->lcd_en_gpio = of_get_named_gpio(node, "lcd-en-gpio", 0);
+ panel->lcd_en_gpio = of_get_named_gpio(node, "led-en-gpio", 0);
+
+ of_property_read_u32(node, "panel-pre-enable-delay",
+ &panel->panel_pre_enable_delay);
+ of_property_read_u32(node, "panel-enable-delay",
+ &panel->panel_enable_delay);
+ of_property_read_u32(node, "panel-disable-delay",
+ &panel->panel_disable_delay);
+ of_property_read_u32(node, "panel-post-disable-delay",
+ &panel->panel_post_disable_delay);
+
+ panel->lcd_fet = devm_regulator_get(dev->dev, "lcd_vdd");
+ if (IS_ERR(panel->lcd_fet))
+ return PTR_ERR(panel->lcd_fet);
+
+ panel->backlight_fet = devm_regulator_get(dev->dev, "vcd_led");
+ if (IS_ERR(panel->backlight_fet))
+ return PTR_ERR(panel->backlight_fet);
+
+ if (gpio_is_valid(panel->lcd_en_gpio)) {
+ ret = devm_gpio_request_one(dev->dev, panel->lcd_en_gpio,
+ GPIOF_OUT_INIT_LOW, "lcd_en_gpio");
+ if (ret) {
+ DRM_ERROR("failed to get lcd-en gpio [%d]\n", ret);
+ return ret;
+ }
+ } else {
+ panel->lcd_en_gpio = -ENODEV;
+ }
+
+ if (gpio_is_valid(panel->led_en_gpio)) {
+ ret = devm_gpio_request_one(dev->dev, panel->led_en_gpio,
+ GPIOF_OUT_INIT_LOW, "led_en_gpio");
+ if (ret) {
+ DRM_ERROR("failed to get led-en gpio [%d]\n", ret);
+ return ret;
+ }
+ } else {
+ panel->led_en_gpio = -ENODEV;
+ }
+
+ ret = drm_bridge_init(dev, bridge, encoder, &bridge_panel_funcs);
+ if (ret) {
+ DRM_ERROR("Failed to initialize bridge with drm\n");
+ goto err;
+ }
+
+ bridge->driver_private = panel;
+
+ return 0;
+
+err:
+ if (gpio_is_valid(panel->lcd_en_gpio))
+ gpio_free(panel->lcd_en_gpio);
+ if (gpio_is_valid(panel->led_en_gpio))
+ gpio_free(panel->led_en_gpio);
+ return ret;
+}
+EXPORT_SYMBOL(bridge_panel_init);
new file mode 100644
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DRM_BRIDGE_PANEL_H_
+#define _DRM_BRIDGE_PANEL_H_
+
+struct drm_device;
+struct drm_encoder;
+struct i2c_client;
+struct device_node;
+
+#if defined(CONFIG_DRM_BRIDGE_PANEL)
+
+int bridge_panel_init(struct drm_device *dev, struct drm_encoder *encoder,
+ struct i2c_client *client, struct device_node *node);
+#else
+
+static inline int bridge_panel_init(struct drm_device *dev,
+ struct drm_encoder *encoder, struct i2c_client *client,
+ struct device_node *node)
+{
+ return 0;
+}
+
+#endif
+
+#endif
implement basic panel controls as a drm_bridge so that the existing bridges can make use of it. The driver assumes that it is the last entity in the bridge chain. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> --- .../bindings/drm/bridge/bridge_panel.txt | 45 ++++ drivers/gpu/drm/bridge/Kconfig | 6 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/bridge_panel.c | 240 +++++++++++++++++++++ include/drm/bridge/bridge_panel.h | 37 ++++ 5 files changed, 329 insertions(+) create mode 100644 Documentation/devicetree/bindings/drm/bridge/bridge_panel.txt create mode 100644 drivers/gpu/drm/bridge/bridge_panel.c create mode 100644 include/drm/bridge/bridge_panel.h