diff mbox

[V2,2/2] ARM: dts: Add sound node for Peach-pit board

Message ID 1399438348-10819-3-git-send-email-tushar.behera@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Tushar Behera May 7, 2014, 4:52 a.m. UTC 
The audio setup on Peach-pit board is similar to Snow board, hence the
sound-card driver used on Snow board can be reused on Peach-pit board.

Peach-pit board uses MAX98090 audio codec.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
Changes for V2:
1. Rebased on now-accepted exynos5420-peach-pit.dts file

 arch/arm/boot/dts/exynos5420-peach-pit.dts |   31 ++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index fae33dd..9902183 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -58,9 +58,23 @@ 
 		pinctrl-0 = <&pwm0_out>;
 		pinctrl-names = "default";
 	};
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98090>;
+	};
 };
 
 &pinctrl_0 {
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	tpm_irq: tpm-irq {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <0>;
@@ -123,6 +137,19 @@ 
 	};
 };
 
+&hsi2c_7 {
+	status = "okay";
+
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+	};
+};
+
 &hsi2c_9 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -145,3 +172,7 @@ 
 &watchdog {
 	timeout-sec = <32>;
 };
+
+&i2s0 {
+	status = "okay";
+};