| Message ID | 1399462252-21821-1-git-send-email-arun.kk@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Arun, Just 2 small nits. On 7 May 2014 17:00, Arun Kumar K <arun.kk@samsung.com> wrote: > MFCv6 encoder needs specific minimum number of buffers to > be queued in the CAPTURE plane. This minimum number will > be known only when the sequence header is generated. > So we used to allow STREAMON on the CAPTURE plane only after > sequence header is generated and checked with the minimum > buffer requirement. > > But this causes a problem that we call a vb2_buffer_done > for the sequence header buffer before doing a STREAON on the > CAPTURE plane. This used to still work fine until this patch > was merged b3379c6201bb3555298cdbf0aa004af260f2a6a4. Please provide the patch title too along with commit ID (first 12 characters of ID is enough). > > This problem should also come in earlier MFC firmware versions > if the application calls STREAMON on CAPTURE with some delay > after doing STREAMON on OUTPUT. > > So this patch keeps the header buffer until the other frame > buffers are ready and dequeues it just before the first frame > is ready. > > Signed-off-by: Arun Kumar K <arun.kk@samsung.com> > --- > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 ++ > drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 6 +++++- > 2 files changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > index d64b680..4fd1034 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > @@ -523,6 +523,7 @@ struct s5p_mfc_codec_ops { > * @output_state: state of the output buffers queue > * @src_bufs: information on allocated source buffers > * @dst_bufs: information on allocated destination buffers > + * @header_mb: buf pointer of the encoded sequence header s/buf/buffer
Hi Sachin, Thank you for the review. Will address your comments and post updated version. Regards Arun On Thu, May 8, 2014 at 3:09 PM, Sachin Kamat <sachin.kamat@linaro.org> wrote: > Hi Arun, > > Just 2 small nits. > > On 7 May 2014 17:00, Arun Kumar K <arun.kk@samsung.com> wrote: >> MFCv6 encoder needs specific minimum number of buffers to >> be queued in the CAPTURE plane. This minimum number will >> be known only when the sequence header is generated. >> So we used to allow STREAMON on the CAPTURE plane only after >> sequence header is generated and checked with the minimum >> buffer requirement. >> >> But this causes a problem that we call a vb2_buffer_done >> for the sequence header buffer before doing a STREAON on the >> CAPTURE plane. This used to still work fine until this patch >> was merged b3379c6201bb3555298cdbf0aa004af260f2a6a4. > > Please provide the patch title too along with commit ID > (first 12 characters of ID is enough). > >> >> This problem should also come in earlier MFC firmware versions >> if the application calls STREAMON on CAPTURE with some delay >> after doing STREAMON on OUTPUT. >> >> So this patch keeps the header buffer until the other frame >> buffers are ready and dequeues it just before the first frame >> is ready. >> >> Signed-off-by: Arun Kumar K <arun.kk@samsung.com> >> --- >> drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 ++ >> drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 6 +++++- >> 2 files changed, 7 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h >> index d64b680..4fd1034 100644 >> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h >> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h >> @@ -523,6 +523,7 @@ struct s5p_mfc_codec_ops { >> * @output_state: state of the output buffers queue >> * @src_bufs: information on allocated source buffers >> * @dst_bufs: information on allocated destination buffers >> + * @header_mb: buf pointer of the encoded sequence header > > s/buf/buffer > > -- > With warm regards, > Sachin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index d64b680..4fd1034 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -523,6 +523,7 @@ struct s5p_mfc_codec_ops { * @output_state: state of the output buffers queue * @src_bufs: information on allocated source buffers * @dst_bufs: information on allocated destination buffers + * @header_mb: buf pointer of the encoded sequence header * @sequence: counter for the sequence number for v4l2 * @dec_dst_flag: flags for buffers queued in the hardware * @dec_src_buf_size: size of the buffer for source buffers in decoding @@ -607,6 +608,7 @@ struct s5p_mfc_ctx { int src_bufs_cnt; struct s5p_mfc_buf dst_bufs[MFC_MAX_BUFFERS]; int dst_bufs_cnt; + struct s5p_mfc_buf *header_mb; unsigned int sequence; unsigned long dec_dst_flag; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index a9a23e1..e7dddb0 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -787,7 +787,7 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx) ctx->dst_queue_cnt--; vb2_set_plane_payload(dst_mb->b, 0, s5p_mfc_hw_call(dev->mfc_ops, get_enc_strm_size, dev)); - vb2_buffer_done(dst_mb->b, VB2_BUF_STATE_DONE); + ctx->header_mb = dst_mb; spin_unlock_irqrestore(&dev->irqlock, flags); } @@ -845,6 +845,10 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx) unsigned int strm_size; unsigned long flags; + if (ctx->header_mb) { + vb2_buffer_done(ctx->header_mb->b, VB2_BUF_STATE_DONE); + ctx->header_mb = NULL; + } slice_type = s5p_mfc_hw_call(dev->mfc_ops, get_enc_slice_type, dev); strm_size = s5p_mfc_hw_call(dev->mfc_ops, get_enc_strm_size, dev); mfc_debug(2, "Encoded slice type: %d\n", slice_type);
MFCv6 encoder needs specific minimum number of buffers to be queued in the CAPTURE plane. This minimum number will be known only when the sequence header is generated. So we used to allow STREAMON on the CAPTURE plane only after sequence header is generated and checked with the minimum buffer requirement. But this causes a problem that we call a vb2_buffer_done for the sequence header buffer before doing a STREAON on the CAPTURE plane. This used to still work fine until this patch was merged b3379c6201bb3555298cdbf0aa004af260f2a6a4. This problem should also come in earlier MFC firmware versions if the application calls STREAMON on CAPTURE with some delay after doing STREAMON on OUTPUT. So this patch keeps the header buffer until the other frame buffers are ready and dequeues it just before the first frame is ready. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> --- drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 ++ drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 6 +++++- 2 files changed, 7 insertions(+), 1 deletion(-)