@@ -58,6 +58,28 @@
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
+
+ usb300_vbus_reg: regulator-usb300 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5.0V_USB3CON0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gph0 0 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb300_vbus_en>;
+ enable-active-high;
+ };
+
+ usb301_vbus_reg: regulator-usb301 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5.0V_USB3CON1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gph0 1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb301_vbus_en>;
+ enable-active-high;
+ };
};
&pinctrl_0 {
@@ -76,6 +98,22 @@
};
};
+&pinctrl_3 {
+ usb300_vbus_en: usb300-vbus-en {
+ samsung,pins = "gph0-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb301_vbus_en: usb301-vbus-en {
+ samsung,pins = "gph0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
&rtc {
status = "okay";
};
@@ -137,6 +175,14 @@
};
};
+&usbdrd3_0 {
+ vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd3_1 {
+ vbus-supply = <&usb301_vbus_reg>;
+};
+
/*
* Use longest HW watchdog in SoC (32 seconds) since the hardware
* watchdog provides no debugging information (compared to soft/hard
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 46 ++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)