diff mbox

[v6,7/8] ARM: dts: exynos5420-smdk5420: Add Vbus regulator for USB 3.0

Message ID 1400076070-12456-8-git-send-email-gautam.vivek@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Vivek Gautam May 14, 2014, 2:01 p.m. UTC 
Add required fixed-regulator for VBUS supply for USB 3.0
controller phy.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
---
 arch/arm/boot/dts/exynos5420-smdk5420.dts |   46 +++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 6910485..6053c9f 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -140,6 +140,22 @@ 
 		};
 	};
 
+	pinctrl@14000000 {
+		usb300_vbus_en: usb300-vbus-en {
+			samsung,pins = "gpg0-5";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		usb301_vbus_en: usb301-vbus-en {
+			samsung,pins = "gpg1-4";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
 	hdmi@14530000 {
 		status = "okay";
 		hpd-gpio = <&gpx3 7 0>;
@@ -147,6 +163,36 @@ 
 		pinctrl-0 = <&hdmi_hpd_irq>;
 	};
 
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg0 5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg1 4 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	phy@12100000 {
+		vbus-supply = <&usb300_vbus_reg>;
+	};
+
+	phy@12500000 {
+		vbus-supply = <&usb301_vbus_reg>;
+	};
+
 	i2c_2: i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;