@@ -317,20 +317,20 @@
pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
pinctrl-names = "default";
status = "okay";
- };
- display-timings {
- native-mode = <&timing0>;
- timing0: timing {
- clock-frequency = <47500000>;
- hactive = <1024>;
- vactive = <600>;
- hfront-porch = <64>;
- hback-porch = <16>;
- hsync-len = <48>;
- vback-porch = <64>;
- vfront-porch = <16>;
- vsync-len = <3>;
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <47500000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <64>;
+ hback-porch = <16>;
+ hsync-len = <48>;
+ vback-porch = <64>;
+ vfront-porch = <16>;
+ vsync-len = <3>;
+ };
};
};
};
@@ -160,20 +160,20 @@
pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
pinctrl-names = "default";
status = "okay";
- };
- display-timings {
- native-mode = <&timing0>;
- timing0: timing {
- clock-frequency = <47500000>;
- hactive = <1024>;
- vactive = <600>;
- hfront-porch = <64>;
- hback-porch = <16>;
- hsync-len = <48>;
- vback-porch = <64>;
- vfront-porch = <16>;
- vsync-len = <3>;
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <47500000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <64>;
+ hback-porch = <16>;
+ hsync-len = <48>;
+ vback-porch = <64>;
+ vfront-porch = <16>;
+ vsync-len = <3>;
+ };
};
};
'display-timings' should be a subnode for fimd node. Moving this node appropriately gets the display back on Origen/Origen-Quad boards. Signed-off-by: Tushar Behera <tushar.b@samsung.com> --- Based on next-20140620. Tested on Exynos4210-Origen board. Looks like there are still some pending bits on Exynos4412-Origen to get display working. arch/arm/boot/dts/exynos4210-origen.dts | 26 +++++++++++++------------- arch/arm/boot/dts/exynos4412-origen.dts | 26 +++++++++++++------------- 2 files changed, 26 insertions(+), 26 deletions(-)