| Message ID | 1403723019-6212-12-git-send-email-javier.martinez@collabora.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On ?ro, 2014-06-25 at 21:03 +0200, Javier Martinez Canillas wrote: > The MAX77802 PMIC has two 32.768kHz Buffered Clock Outputs with > Low Jitter Mode. This patch adds support for these two clocks. > > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > --- > > Changes since v3: None > > Changes since v2: None > > Changes since v1: > - Use module_platform_driver() instead of having init/exit functions. > Suggested by Mark Brown. > - Use the generic maxim clock driver to reduce code duplication with > clk-max77686.c driver. > > drivers/clk/Kconfig | 7 +++ > drivers/clk/Makefile | 1 + > drivers/clk/clk-max77802.c | 99 ++++++++++++++++++++++++++++++ > include/dt-bindings/clock/maxim,max77802.h | 22 +++++++ > 4 files changed, 129 insertions(+) > create mode 100644 drivers/clk/clk-max77802.c > create mode 100644 include/dt-bindings/clock/maxim,max77802.h Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 3fd4270..221260b 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -42,6 +42,13 @@ config COMMON_CLK_MAX77686 > ---help--- > This driver supports Maxim 77686 crystal oscillator clock. > > +config COMMON_CLK_MAX77802 > + tristate "Clock driver for Maxim 77802 MFD" > + depends on MFD_MAX77802 > + select COMMON_CLK_MAX_GEN > + ---help--- > + This driver supports Maxim 77802 crystal oscillator clock. > + > config COMMON_CLK_SI5351 > tristate "Clock driver for SiLabs 5351A/B/C" > depends on I2C > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index 6c1aff6..520ff76 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -20,6 +20,7 @@ obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o > obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o > obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o > obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o > +obj-$(CONFIG_COMMON_CLK_MAX77802) += clk-max77802.o > obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o > obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o > obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o > diff --git a/drivers/clk/clk-max77802.c b/drivers/clk/clk-max77802.c > new file mode 100644 > index 0000000..4253b44 > --- /dev/null > +++ b/drivers/clk/clk-max77802.c > @@ -0,0 +1,99 @@ > +/* > + * clk-max77802.c - Clock driver for Maxim 77802 > + * > + * Copyright (C) 2014 Google, Inc > + * > + * Copyright (C) 2012 Samsung Electornics > + * Jonghwa Lee <jonghwa3.lee@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * This driver is based on clk-max77686.c > + */ > + > +#include <linux/kernel.h> > +#include <linux/slab.h> > +#include <linux/err.h> > +#include <linux/platform_device.h> > +#include <linux/mfd/max77802.h> > +#include <linux/mfd/max77802-private.h> > +#include <linux/clk-provider.h> > +#include <linux/mutex.h> > +#include <linux/clkdev.h> > + > +#include <dt-bindings/clock/maxim,max77802.h> > +#include "clk-max-gen.h" > + > +#define MAX77802_CLOCK_OPMODE_MASK 0x1 > +#define MAX77802_CLOCK_LOW_JITTER_SHIFT 0x3 > + > +static struct clk_init_data max77802_clks_init[MAX77802_CLKS_NUM] = { > + [MAX77802_CLK_32K_AP] = { > + .name = "32khz_ap", > + .ops = &max_gen_clk_ops, > + .flags = CLK_IS_ROOT, > + }, > + [MAX77802_CLK_32K_CP] = { > + .name = "32khz_cp", > + .ops = &max_gen_clk_ops, > + .flags = CLK_IS_ROOT, > + }, > +}; > + > +static int max77802_clk_probe(struct platform_device *pdev) > +{ > + struct max77802_dev *iodev = dev_get_drvdata(pdev->dev.parent); > + int ret; > + > + ret = max_gen_clk_probe(pdev, iodev->regmap, MAX77802_REG_32KHZ, > + max77802_clks_init, MAX77802_CLKS_NUM); > + > + if (ret) { > + dev_err(&pdev->dev, "generic probe failed %d\n", ret); > + return ret; > + } > + > + /* Enable low-jitter mode on the 32khz clocks. */ > + ret = regmap_update_bits(iodev->regmap, MAX77802_REG_32KHZ, > + 1 << MAX77802_CLOCK_LOW_JITTER_SHIFT, > + 1 << MAX77802_CLOCK_LOW_JITTER_SHIFT); > + if (ret < 0) > + dev_err(&pdev->dev, "failed to enable low-jitter mode\n"); > + > + return ret; > +} > + > +static int max77802_clk_remove(struct platform_device *pdev) > +{ > + return max_gen_clk_remove(pdev, MAX77802_CLKS_NUM); > +} > + > +static const struct platform_device_id max77802_clk_id[] = { > + { "max77802-clk", 0}, > + { }, > +}; > +MODULE_DEVICE_TABLE(platform, max77802_clk_id); > + > +static struct platform_driver max77802_clk_driver = { > + .driver = { > + .name = "max77802-clk", > + .owner = THIS_MODULE, > + }, > + .probe = max77802_clk_probe, > + .remove = max77802_clk_remove, > + .id_table = max77802_clk_id, > +}; > + > +module_platform_driver(max77802_clk_driver); > + > +MODULE_DESCRIPTION("MAXIM 77802 Clock Driver"); > +MODULE_AUTHOR("Javier Martinez Canillas <javier.martinez@collabora.co.uk>"); > +MODULE_LICENSE("GPL"); > diff --git a/include/dt-bindings/clock/maxim,max77802.h b/include/dt-bindings/clock/maxim,max77802.h > new file mode 100644 > index 0000000..997312e > --- /dev/null > +++ b/include/dt-bindings/clock/maxim,max77802.h > @@ -0,0 +1,22 @@ > +/* > + * Copyright (C) 2014 Google, Inc > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * Device Tree binding constants clocks for the Maxim 77802 PMIC. > + */ > + > +#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H > +#define _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H > + > +/* Fixed rate clocks. */ > + > +#define MAX77802_CLK_32K_AP 0 > +#define MAX77802_CLK_32K_CP 1 > + > +/* Total number of clocks. */ > +#define MAX77802_CLKS_NUM (MAX77802_CLK_32K_CP + 1) > + > +#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H */ -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 3fd4270..221260b 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -42,6 +42,13 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config COMMON_CLK_MAX77802 + tristate "Clock driver for Maxim 77802 MFD" + depends on MFD_MAX77802 + select COMMON_CLK_MAX_GEN + ---help--- + This driver supports Maxim 77802 crystal oscillator clock. + config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 6c1aff6..520ff76 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +obj-$(CONFIG_COMMON_CLK_MAX77802) += clk-max77802.o obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o diff --git a/drivers/clk/clk-max77802.c b/drivers/clk/clk-max77802.c new file mode 100644 index 0000000..4253b44 --- /dev/null +++ b/drivers/clk/clk-max77802.c @@ -0,0 +1,99 @@ +/* + * clk-max77802.c - Clock driver for Maxim 77802 + * + * Copyright (C) 2014 Google, Inc + * + * Copyright (C) 2012 Samsung Electornics + * Jonghwa Lee <jonghwa3.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on clk-max77686.c + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/mfd/max77802.h> +#include <linux/mfd/max77802-private.h> +#include <linux/clk-provider.h> +#include <linux/mutex.h> +#include <linux/clkdev.h> + +#include <dt-bindings/clock/maxim,max77802.h> +#include "clk-max-gen.h" + +#define MAX77802_CLOCK_OPMODE_MASK 0x1 +#define MAX77802_CLOCK_LOW_JITTER_SHIFT 0x3 + +static struct clk_init_data max77802_clks_init[MAX77802_CLKS_NUM] = { + [MAX77802_CLK_32K_AP] = { + .name = "32khz_ap", + .ops = &max_gen_clk_ops, + .flags = CLK_IS_ROOT, + }, + [MAX77802_CLK_32K_CP] = { + .name = "32khz_cp", + .ops = &max_gen_clk_ops, + .flags = CLK_IS_ROOT, + }, +}; + +static int max77802_clk_probe(struct platform_device *pdev) +{ + struct max77802_dev *iodev = dev_get_drvdata(pdev->dev.parent); + int ret; + + ret = max_gen_clk_probe(pdev, iodev->regmap, MAX77802_REG_32KHZ, + max77802_clks_init, MAX77802_CLKS_NUM); + + if (ret) { + dev_err(&pdev->dev, "generic probe failed %d\n", ret); + return ret; + } + + /* Enable low-jitter mode on the 32khz clocks. */ + ret = regmap_update_bits(iodev->regmap, MAX77802_REG_32KHZ, + 1 << MAX77802_CLOCK_LOW_JITTER_SHIFT, + 1 << MAX77802_CLOCK_LOW_JITTER_SHIFT); + if (ret < 0) + dev_err(&pdev->dev, "failed to enable low-jitter mode\n"); + + return ret; +} + +static int max77802_clk_remove(struct platform_device *pdev) +{ + return max_gen_clk_remove(pdev, MAX77802_CLKS_NUM); +} + +static const struct platform_device_id max77802_clk_id[] = { + { "max77802-clk", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77802_clk_id); + +static struct platform_driver max77802_clk_driver = { + .driver = { + .name = "max77802-clk", + .owner = THIS_MODULE, + }, + .probe = max77802_clk_probe, + .remove = max77802_clk_remove, + .id_table = max77802_clk_id, +}; + +module_platform_driver(max77802_clk_driver); + +MODULE_DESCRIPTION("MAXIM 77802 Clock Driver"); +MODULE_AUTHOR("Javier Martinez Canillas <javier.martinez@collabora.co.uk>"); +MODULE_LICENSE("GPL"); diff --git a/include/dt-bindings/clock/maxim,max77802.h b/include/dt-bindings/clock/maxim,max77802.h new file mode 100644 index 0000000..997312e --- /dev/null +++ b/include/dt-bindings/clock/maxim,max77802.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clocks for the Maxim 77802 PMIC. + */ + +#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H +#define _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H + +/* Fixed rate clocks. */ + +#define MAX77802_CLK_32K_AP 0 +#define MAX77802_CLK_32K_CP 1 + +/* Total number of clocks. */ +#define MAX77802_CLKS_NUM (MAX77802_CLK_32K_CP + 1) + +#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H */
The MAX77802 PMIC has two 32.768kHz Buffered Clock Outputs with Low Jitter Mode. This patch adds support for these two clocks. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- Changes since v3: None Changes since v2: None Changes since v1: - Use module_platform_driver() instead of having init/exit functions. Suggested by Mark Brown. - Use the generic maxim clock driver to reduce code duplication with clk-max77686.c driver. drivers/clk/Kconfig | 7 +++ drivers/clk/Makefile | 1 + drivers/clk/clk-max77802.c | 99 ++++++++++++++++++++++++++++++ include/dt-bindings/clock/maxim,max77802.h | 22 +++++++ 4 files changed, 129 insertions(+) create mode 100644 drivers/clk/clk-max77802.c create mode 100644 include/dt-bindings/clock/maxim,max77802.h