From patchwork Thu Jun 26 18:15:42 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Javier Martinez Canillas X-Patchwork-Id: 4429691 Return-Path: X-Original-To: patchwork-linux-samsung-soc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 35E989F2C8 for ; Thu, 26 Jun 2014 18:18:48 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 407862028D for ; Thu, 26 Jun 2014 18:18:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 1ABE720306 for ; Thu, 26 Jun 2014 18:18:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753669AbaFZSSP (ORCPT ); Thu, 26 Jun 2014 14:18:15 -0400 Received: from bhuna.collabora.co.uk ([93.93.135.160]:33372 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964940AbaFZSQ4 (ORCPT ); Thu, 26 Jun 2014 14:16:56 -0400 Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: javier) with ESMTPSA id 5F5E46022B3 From: Javier Martinez Canillas To: Lee Jones Cc: Samuel Ortiz , Mark Brown , Mike Turquette , Liam Girdwood , Alessandro Zummo , Kukjin Kim , Doug Anderson , Olof Johansson , Sjoerd Simons , Daniel Stone , Tomeu Vizoso , Krzysztof Kozlowski , Yadwinder Singh Brar , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH v5 10/14] regulator: Add driver for Maxim 77802 PMIC regulators Date: Thu, 26 Jun 2014 20:15:42 +0200 Message-Id: <1403806546-31122-11-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.0.0.rc2 In-Reply-To: <1403806546-31122-1-git-send-email-javier.martinez@collabora.co.uk> References: <1403806546-31122-1-git-send-email-javier.martinez@collabora.co.uk> Sender: linux-samsung-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO) regulators. This patch adds support for all these regulators found on the MAX77802 PMIC and is based on a driver added by Simon Glass to the Chrome OS kernel 3.8 tree. Signed-off-by: Javier Martinez Canillas Tested-by: Naveen Krishna Chatradhi --- Changes since v4: None Changes since v3: - Set the supply_name for regulators to lookup their parent supply node. Suggested by Mark Brown. - Change Exyno5 for Exynos5420/Exynos5800 in regulator driver Kconfig. Suggested by Doug Anderson. Changes since v2: - Use dev_warn() instead pr_warn(). Suggested by Mark Brown. - Add a generic function to regmap core to copy registers instead of having a driver-specific function. Suggested by Mark Brown. - Remove unnecessary probe debug log. Suggested by Mark Brown. - Set struct regulator_config dev field to MFD instead of the platform dev. Suggested by Mark Brown. - Read the regulators operational mode from the hardware registers instead of setting to normal as default on probe. Suggested by Mark Brown. - Remove unnecessary cross-subsystem dependencies. Suggested by Lee Jones. Changes since v1: - Remove unneeded check if num_regulators != MAX77802_MAX_REGULATORS. - Fix .set_suspend_mode handler comment and split regulators ops for regulators that behave differently. Suggested by Mark Brown. - Use module_platform_driver() instead of having init/exit functions. Suggested by Mark Brown. - Use the new descriptor-based GPIO interface instead of the deprecated integer based GPIO one. Suggested by Mark Brown. - Look for "regulators" child node instead of "voltage-regulators" to be consistent with other PMIC drivers. Suggested by Mark Brown. drivers/mfd/max77802.c | 8 +- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/max77802.c | 694 +++++++++++++++++++++++++++++++++++ include/linux/mfd/max77802-private.h | 3 - 5 files changed, 711 insertions(+), 4 deletions(-) create mode 100644 drivers/regulator/max77802.c diff --git a/drivers/mfd/max77802.c b/drivers/mfd/max77802.c index 3d477fb..79d36b6 100644 --- a/drivers/mfd/max77802.c +++ b/drivers/mfd/max77802.c @@ -228,7 +228,7 @@ static int max77802_i2c_probe(struct i2c_client *i2c, max77802 = devm_kzalloc(&i2c->dev, sizeof(struct max77802_dev), GFP_KERNEL); - if (max77802 == NULL) + if (!max77802) return -ENOMEM; i2c_set_clientdata(i2c, max77802); @@ -315,6 +315,12 @@ static int max77802_suspend(struct device *dev) if (device_may_wakeup(dev)) enable_irq_wake(max77802->irq); + /* + * The IRQ must be disabled during suspend since due wakeup + * ordering issues it may be possible that the I2C controller + * is still suspended when the interrupt happens so the IRQ + * handler will fail to read the I2C bus. + */ disable_irq(max77802->irq); return 0; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 789eb46..283f172 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -377,6 +377,15 @@ config REGULATOR_MAX77693 and one current regulator 'CHARGER'. This is suitable for Exynos-4x12 chips. +config REGULATOR_MAX77802 + tristate "Maxim 77802 regulator" + depends on MFD_MAX77802 + help + This driver controls a Maxim 77802 regulator + via I2C bus. The provided regulator is suitable for + Exynos5420/Exynos5800 SoCs to control various voltages. + It includes support for control of voltage and ramp speed. + config REGULATOR_MC13XXX_CORE tristate diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index d461110..2aea4b6 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o +obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c new file mode 100644 index 0000000..8fd70b6 --- /dev/null +++ b/drivers/regulator/max77802.c @@ -0,0 +1,694 @@ +/* + * max77802.c - Regulator driver for the Maxim 77802 + * + * Copyright (C) 2013-2014 Google, Inc + * Simon Glass + * + * Copyright (C) 2012 Samsung Electronics + * Chiwoong Byun + * Jonghwa Lee + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on max8997.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Default ramp delay in case it is not manually set */ +#define MAX77802_RAMP_DELAY 100000 /* uV/us */ + +#define MAX77802_OPMODE_SHIFT_LDO 6 +#define MAX77802_OPMODE_BUCK234_SHIFT 4 +#define MAX77802_OPMODE_MASK 0x3 + +#define MAX77802_VSEL_MASK 0x3F +#define MAX77802_DVS_VSEL_MASK 0xFF + +#define MAX77802_RAMP_RATE_MASK_2BIT 0xC0 +#define MAX77802_RAMP_RATE_SHIFT_2BIT 6 +#define MAX77802_RAMP_RATE_MASK_4BIT 0xF0 +#define MAX77802_RAMP_RATE_SHIFT_4BIT 4 + +/* MAX77802 has two register formats: 2-bit and 4-bit */ +static const unsigned int ramp_table_77802_2bit[] = { + 12500, + 25000, + 50000, + 100000, +}; + +static unsigned int ramp_table_77802_4bit[] = { + 1000, 2000, 3030, 4000, + 5000, 5880, 7140, 8330, + 9090, 10000, 11110, 12500, + 16670, 25000, 50000, 100000, +}; + +struct max77802_regulator_prv { + int num_regulators; + struct regulator_dev *rdev[MAX77802_REG_MAX]; + unsigned int opmode[MAX77802_REG_MAX]; +}; + +static int max77802_get_opmode_shift(int id) +{ + if (id >= MAX77802_LDO1 && id <= MAX77802_LDO35) + return MAX77802_OPMODE_SHIFT_LDO; + else if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 && + id <= MAX77802_BUCK10)) + return 0; + else if (id >= MAX77802_BUCK2 && id <= MAX77802_BUCK4) + return MAX77802_OPMODE_BUCK234_SHIFT; + else + return -EINVAL; +} + +/* + * Some BUCKS supports Normal[ON/OFF] mode during suspend + * + * BUCK 1, 6, 2-4, 5, 7-10 (all) + * + * The other mode (0x02) will make PWRREQ switch between normal + * and low power. + */ +static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev) +{ + unsigned int val = MAX77802_OPMODE_STANDBY; + struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int shift = max77802_get_opmode_shift(id); + + max77802->opmode[id] = val; + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val << shift); +} + +/* + * Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state + * (Enable Control Logic1 by PWRREQ) + * + * LDOs 2, 4-19, 22-35. + * + */ +static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev, + unsigned int mode) +{ + struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + unsigned int val; + int shift = max77802_get_opmode_shift(id); + + switch (mode) { + case REGULATOR_MODE_IDLE: /* ON in LP Mode */ + val = MAX77802_OPMODE_LP; + break; + case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ + val = MAX77802_OPMODE_NORMAL; + break; + case REGULATOR_MODE_STANDBY: /* ON/OFF by PWRREQ */ + val = MAX77802_OPMODE_STANDBY; + break; + default: + dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", + rdev->desc->name, mode); + return -EINVAL; + } + + max77802->opmode[rdev_get_id(rdev)] = val; + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val << shift); +} + +/* + * Mode 1 (Output[ON/OFF] by PWRREQ) is not supported on some LDOs + * (Enable Control Logic2 by PWRREQ) + * + * LDOs 1, 20, 21, and 3, + * + */ +static int max77802_ldo_set_suspend_mode_logic2(struct regulator_dev *rdev, + unsigned int mode) +{ + struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + unsigned int val; + int shift = max77802_get_opmode_shift(id); + + switch (mode) { + case REGULATOR_MODE_IDLE: /* ON in LP Mode */ + val = MAX77802_OPMODE_LP; + break; + case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ + val = MAX77802_OPMODE_NORMAL; + break; + default: + dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", + rdev->desc->name, mode); + return -EINVAL; + } + + max77802->opmode[rdev_get_id(rdev)] = val; + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val << shift); +} + +static int max77802_enable(struct regulator_dev *rdev) +{ + struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int shift = max77802_get_opmode_shift(id); + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, + max77802->opmode[id] << shift); +} + +static int max77802_find_ramp_value(struct regulator_dev *rdev, + const unsigned int limits[], int size, + unsigned int ramp_delay) +{ + int i; + + for (i = 0; i < size; i++) { + if (ramp_delay <= limits[i]) + return i; + } + + /* Use maximum value for no ramp control */ + dev_warn(&rdev->dev, "%s: ramp_delay: %d not supported, setting 100000\n", + rdev->desc->name, ramp_delay); + return size - 1; +} + +/* Used for BUCKs 2-4 */ +static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev, + int ramp_delay) +{ + int id = rdev_get_id(rdev); + unsigned int ramp_value; + + if (id > MAX77802_BUCK4) { + dev_warn(&rdev->dev, + "%s: regulator: ramp delay not supported\n", + rdev->desc->name); + return -EINVAL; + } + ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit, + ARRAY_SIZE(ramp_table_77802_2bit), ramp_delay); + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + MAX77802_RAMP_RATE_MASK_2BIT, + ramp_value << MAX77802_RAMP_RATE_SHIFT_2BIT); +} + +/* For BUCK1, 6 */ +static int max77802_set_ramp_delay_4bit(struct regulator_dev *rdev, + int ramp_delay) +{ + unsigned int ramp_value; + + ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_4bit, + ARRAY_SIZE(ramp_table_77802_4bit), ramp_delay); + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + MAX77802_RAMP_RATE_MASK_4BIT, + ramp_value << MAX77802_RAMP_RATE_SHIFT_4BIT); +} + +/* + * LDOs 2, 4-19, 22-35 + */ +static struct regulator_ops max77802_ldo_ops_logic1 = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77802_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_mode = max77802_ldo_set_suspend_mode_logic1, +}; + +/* + * LDOs 1, 20, 21, 3 + */ +static struct regulator_ops max77802_ldo_ops_logic2 = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77802_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_mode = max77802_ldo_set_suspend_mode_logic2, +}; + +/* BUCKS 1, 6 */ +static struct regulator_ops max77802_buck_16_dvs_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77802_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = max77802_set_ramp_delay_4bit, + .set_suspend_disable = max77802_buck_set_suspend_disable, +}; + +/* BUCKs 2-4, 5, 7-10 */ +static struct regulator_ops max77802_buck_dvs_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77802_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = max77802_set_ramp_delay_2bit, + .set_suspend_disable = max77802_buck_set_suspend_disable, +}; + +/* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */ +#define regulator_77802_desc_p_ldo(num, supply, log) { \ + .name = "LDO"#num, \ + .id = MAX77802_LDO##num, \ + .supply_name = "inl"#supply, \ + .ops = &max77802_ldo_ops_logic##log, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 800000, \ + .uV_step = 50000, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 6, \ + .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77802_VSEL_MASK, \ + .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ +} + +/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */ +#define regulator_77802_desc_n_ldo(num, supply, log) { \ + .name = "LDO"#num, \ + .id = MAX77802_LDO##num, \ + .supply_name = "inl"#supply, \ + .ops = &max77802_ldo_ops_logic##log, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 800000, \ + .uV_step = 25000, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 6, \ + .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77802_VSEL_MASK, \ + .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ +} + +/* BUCKs 1, 6 */ +#define regulator_77802_desc_16_buck(num) { \ + .name = "BUCK"#num, \ + .id = MAX77802_BUCK##num, \ + .supply_name = "inb"#num, \ + .ops = &max77802_buck_16_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 612500, \ + .uV_step = 6250, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 8, \ + .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \ + .vsel_mask = MAX77802_DVS_VSEL_MASK, \ + .enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \ + .enable_mask = MAX77802_OPMODE_MASK, \ +} + +/* BUCKS 2-4 */ +#define regulator_77802_desc_234_buck(num) { \ + .name = "BUCK"#num, \ + .id = MAX77802_BUCK##num, \ + .supply_name = "inb"#num, \ + .ops = &max77802_buck_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 600000, \ + .uV_step = 6250, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 0x91, \ + .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \ + .vsel_mask = MAX77802_DVS_VSEL_MASK, \ + .enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \ + .enable_mask = MAX77802_OPMODE_MASK << \ + MAX77802_OPMODE_BUCK234_SHIFT, \ +} + +/* BUCK 5 */ +#define regulator_77802_desc_buck5(num) { \ + .name = "BUCK"#num, \ + .id = MAX77802_BUCK##num, \ + .supply_name = "inb"#num, \ + .ops = &max77802_buck_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 750000, \ + .uV_step = 50000, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 6, \ + .vsel_reg = MAX77802_REG_BUCK5OUT, \ + .vsel_mask = MAX77802_VSEL_MASK, \ + .enable_reg = MAX77802_REG_BUCK5CTRL, \ + .enable_mask = MAX77802_OPMODE_MASK, \ +} + +/* BUCKs 7-10 */ +#define regulator_77802_desc_buck7_10(num) { \ + .name = "BUCK"#num, \ + .id = MAX77802_BUCK##num, \ + .supply_name = "inb"#num, \ + .ops = &max77802_buck_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 750000, \ + .uV_step = 50000, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 6, \ + .vsel_reg = MAX77802_REG_BUCK7OUT + (num - 7) * 3, \ + .vsel_mask = MAX77802_VSEL_MASK, \ + .enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \ + .enable_mask = MAX77802_OPMODE_MASK, \ +} + +static struct regulator_desc regulators[] = { + regulator_77802_desc_16_buck(1), + regulator_77802_desc_234_buck(2), + regulator_77802_desc_234_buck(3), + regulator_77802_desc_234_buck(4), + regulator_77802_desc_buck5(5), + regulator_77802_desc_16_buck(6), + regulator_77802_desc_buck7_10(7), + regulator_77802_desc_buck7_10(8), + regulator_77802_desc_buck7_10(9), + regulator_77802_desc_buck7_10(10), + regulator_77802_desc_n_ldo(1, 10, 2), + regulator_77802_desc_n_ldo(2, 10, 1), + regulator_77802_desc_p_ldo(3, 3, 2), + regulator_77802_desc_p_ldo(4, 6, 1), + regulator_77802_desc_p_ldo(5, 3, 1), + regulator_77802_desc_p_ldo(6, 3, 1), + regulator_77802_desc_p_ldo(7, 3, 1), + regulator_77802_desc_n_ldo(8, 1, 1), + regulator_77802_desc_p_ldo(9, 5, 1), + regulator_77802_desc_p_ldo(10, 4, 1), + regulator_77802_desc_p_ldo(11, 4, 1), + regulator_77802_desc_p_ldo(12, 9, 1), + regulator_77802_desc_p_ldo(13, 4, 1), + regulator_77802_desc_p_ldo(14, 4, 1), + regulator_77802_desc_n_ldo(15, 1, 1), + regulator_77802_desc_n_ldo(17, 2, 1), + regulator_77802_desc_p_ldo(18, 7, 1), + regulator_77802_desc_p_ldo(19, 5, 1), + regulator_77802_desc_p_ldo(20, 7, 2), + regulator_77802_desc_p_ldo(21, 6, 2), + regulator_77802_desc_p_ldo(23, 9, 1), + regulator_77802_desc_p_ldo(24, 6, 1), + regulator_77802_desc_p_ldo(25, 9, 1), + regulator_77802_desc_p_ldo(26, 9, 1), + regulator_77802_desc_n_ldo(27, 2, 1), + regulator_77802_desc_p_ldo(28, 7, 1), + regulator_77802_desc_p_ldo(29, 7, 1), + regulator_77802_desc_n_ldo(30, 2, 1), + regulator_77802_desc_p_ldo(32, 9, 1), + regulator_77802_desc_p_ldo(33, 6, 1), + regulator_77802_desc_p_ldo(34, 9, 1), + regulator_77802_desc_n_ldo(35, 2, 1), +}; + +#ifdef CONFIG_OF +static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev, + struct max77802_platform_data *pdata) +{ + struct max77802_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct device_node *pmic_np, *regulators_np; + struct max77802_regulator_data *rdata; + struct of_regulator_match rmatch; + unsigned int i; + + pmic_np = iodev->dev->of_node; + regulators_np = of_get_child_by_name(pmic_np, "regulators"); + if (!regulators_np) { + dev_err(&pdev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + pdata->num_regulators = ARRAY_SIZE(regulators); + rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) { + of_node_put(regulators_np); + return -ENOMEM; + } + + for (i = 0; i < pdata->num_regulators; i++) { + rmatch.name = regulators[i].name; + rmatch.init_data = NULL; + rmatch.of_node = NULL; + if (of_regulator_match(&pdev->dev, regulators_np, &rmatch, + 1) != 1) { + dev_warn(&pdev->dev, "No matching regulator for '%s'\n", + rmatch.name); + continue; + } + rdata[i].initdata = rmatch.init_data; + rdata[i].of_node = rmatch.of_node; + rdata[i].id = regulators[i].id; + } + + pdata->regulators = rdata; + of_node_put(regulators_np); + + return 0; +} +#else +static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev, + struct max77802_platform_data *pdata) +{ + return 0; +} +#endif /* CONFIG_OF */ + +/** + * max77802_setup_gpios - init DVS-related GPIOs + * + * This function claims / initalizations GPIOs related to DVS if they are + * defined. This may have the effect of switching voltages if the + * pdata->buck_default_idx does not match the boot time state of pins. + */ +static int max77802_setup_gpios(struct device *dev, + struct max77802_platform_data *pdata) +{ + int buck_default_idx = pdata->buck_default_idx; + int ret; + int i; + + /* Set all SELB high to avoid glitching while DVS is changing */ + for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_selb); i++) { + struct gpio_desc *gpio = pdata->buck_gpio_selb[i]; + + /* OK if some GPIOs aren't defined */ + if (IS_ERR(gpio)) + continue; + + ret = gpiod_direction_output_raw(gpio, 1); + if (ret) { + dev_err(dev, "can't set gpio[%d] dir: %d\n", i, ret); + return ret; + } + } + + /* Set our initial setting */ + for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_dvs); i++) { + struct gpio_desc *gpio = pdata->buck_gpio_dvs[i]; + + /* OK if some GPIOs aren't defined */ + if (IS_ERR(gpio)) + continue; + + /* If a GPIO is valid, set it */ + gpiod_direction_output(gpio, (buck_default_idx >> i) & 1); + if (ret) { + dev_err(dev, "can't set gpio[%d]: dir %d\n", i, ret); + return ret; + } + } + + /* Now set SELB low to take effect */ + for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_selb); i++) { + struct gpio_desc *gpio = pdata->buck_gpio_selb[i]; + + if (!IS_ERR(gpio)) + gpiod_set_value(gpio, 0); + } + + return 0; +} + +/** + * max77802_read_gpios - read the current state of the dvs GPIOs + * + * We call this function at bootup to detect what slot the firmware was + * using for the DVS GPIOs. That way we can properly preserve the firmware's + * voltage settings + */ +static int max77802_read_gpios(struct max77802_platform_data *pdata) +{ + int buck_default_idx = pdata->buck_default_idx; + int result = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_dvs); i++) { + struct gpio_desc *gpio = pdata->buck_gpio_dvs[i]; + + /* OK if some GPIOs aren't defined; we'll use default */ + if (IS_ERR(gpio)) { + result |= buck_default_idx & (1 << i); + continue; + } + + if (gpiod_get_value_cansleep(gpio)) + result |= 1 << i; + } + + return result; +} + +static inline bool max77802_is_dvs_buck(int id) +{ + /* on 77802 bucks 1-4, 6 are */ + return ((id >= MAX77802_BUCK1 && id <= MAX77802_BUCK4) || + (id == MAX77802_BUCK6)); +} + +static int max77802_pmic_probe(struct platform_device *pdev) +{ + struct max77802_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max77802_platform_data *pdata = dev_get_platdata(iodev->dev); + struct max77802_regulator_prv *max77802; + int i, ret = 0, val; + struct regulator_config config = { }; + unsigned int reg; + int buck_default_idx; + int buck_old_idx; + + /* This is allocated by the MFD driver */ + if (!pdata) { + dev_err(&pdev->dev, "no platform data found for regulator\n"); + return -ENODEV; + } + + max77802 = devm_kzalloc(&pdev->dev, + sizeof(struct max77802_regulator_prv), + GFP_KERNEL); + if (!max77802) + return -ENOMEM; + + if (iodev->dev->of_node) { + ret = max77802_pmic_dt_parse_pdata(pdev, pdata); + if (ret) + return ret; + } + + config.dev = iodev->dev; + config.regmap = iodev->regmap; + config.driver_data = max77802; + platform_set_drvdata(pdev, max77802); + + buck_default_idx = pdata->buck_default_idx; + buck_old_idx = max77802_read_gpios(pdata); + + for (i = 0; i < MAX77802_REG_MAX; i++) { + struct regulator_dev *rdev; + int id = pdata->regulators[i].id; + int shift = max77802_get_opmode_shift(id); + + config.init_data = pdata->regulators[i].initdata; + config.of_node = pdata->regulators[i].of_node; + + ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val); + max77802->opmode[id] = val >> shift & MAX77802_OPMODE_MASK; + + if (max77802_is_dvs_buck(id)) { + /* Try to copy over data so we keep firmware settings */ + reg = regulators[i].vsel_reg; + + ret = regmap_reg_copy(iodev->regmap, + reg + buck_default_idx, + reg + buck_old_idx); + + if (ret) + dev_warn(&pdev->dev, "Copy err %d => %d (%d)\n", + reg + buck_old_idx, + reg + buck_default_idx, ret); + + regulators[i].vsel_reg += buck_default_idx; + } + + rdev = devm_regulator_register(&pdev->dev, + ®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "regulator init failed for %d\n", i); + return PTR_ERR(rdev); + } + } + + ret = max77802_setup_gpios(&pdev->dev, pdata); + if (ret) + return ret; + + return 0; +} + +static const struct platform_device_id max77802_pmic_id[] = { + {"max77802-pmic", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77802_pmic_id); + +static struct platform_driver max77802_pmic_driver = { + .driver = { + .name = "max77802-pmic", + .owner = THIS_MODULE, + }, + .probe = max77802_pmic_probe, + .id_table = max77802_pmic_id, +}; + +module_platform_driver(max77802_pmic_driver); + +MODULE_DESCRIPTION("MAXIM 77802 Regulator Driver"); +MODULE_AUTHOR("Simon Glass "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/max77802-private.h b/include/linux/mfd/max77802-private.h index 7539ab4..da3f545 100644 --- a/include/linux/mfd/max77802-private.h +++ b/include/linux/mfd/max77802-private.h @@ -228,9 +228,6 @@ enum max77802_rtc_reg { MAX77802_RTC_END = 0xDF, }; -#define MAX77802_IRQSRC_PMIC (0) -#define MAX77802_IRQSRC_RTC BIT(0) - enum max77802_irq_source { PMIC_INT1 = 0, PMIC_INT2,