diff mbox

[PATCHv2,2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc

Message ID 1404128960-27225-3-git-send-email-jh80.chung@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jaehoon Chung June 30, 2014, 11:49 a.m. UTC 
dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <trblinux@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 arch/arm/boot/dts/exynos4412-odroidx.dts      |    8 ++------
 arch/arm/boot/dts/exynos4412-origen.dts       |    8 ++------
 arch/arm/boot/dts/exynos4412-trats2.dts       |    8 ++------
 arch/arm/boot/dts/exynos5250-arndale.dts      |   18 +++++------------
 arch/arm/boot/dts/exynos5250-cros-common.dtsi |   26 +++++++------------------
 arch/arm/boot/dts/exynos5250-smdk5250.dts     |   18 +++++------------
 arch/arm/boot/dts/exynos5250-snow.dts         |    6 ++----
 arch/arm/boot/dts/exynos5260-xyref5260.dts    |   18 +++++------------
 arch/arm/boot/dts/exynos5410-smdk5410.dts     |   18 +++++------------
 arch/arm/boot/dts/exynos5420-arndale-octa.dts |   16 ++++-----------
 arch/arm/boot/dts/exynos5420-peach-pit.dts    |   16 ++++-----------
 arch/arm/boot/dts/exynos5420-smdk5420.dts     |   16 ++++-----------
 arch/arm/boot/dts/exynos5800-peach-pi.dts     |   16 ++++-----------
 13 files changed, 51 insertions(+), 141 deletions(-)

Comments

Seungwon Jeon July 7, 2014, 7:29 a.m. UTC | #1 
Hi Jaehoon,

Please check one thing below.

On Mon, June 30, 2014, Jaehoon Chung wrote:
> dw-mmc controller can support multiple slots.
> But, there are no use-cases anywhere. So we don't need to support the
> slot-node for dw-mmc controller.
> And "supports-highspeed" property in dw-mmc is deprecated.
> "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
> 
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Reviewed-by: Tushar Behera <trblinux@gmail.com>
> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---

> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-
> octa.dts
> index 434fd9d..5f37b81 100644
> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> @@ -50,7 +50,6 @@
>  	mmc@12200000 {
>  		status = "okay";
>  		broken-cd;
> -		supports-highspeed;
>  		card-detect-delay = <200>;
>  		samsung,dw-mshc-ciu-div = <3>;
>  		samsung,dw-mshc-sdr-timing = <0 4>;
> @@ -58,16 +57,12 @@
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
>  		vmmc-supply = <&ldo10_reg>;
> -
> -		slot@0 {
> -			reg = <0>;
> -			bus-width = <8>;
> -		};
> +		bus-width = <8>;
> +		cap-mmc-highspeed;
>  	};
> 
>  	mmc@12220000 {
>  		status = "okay";
> -		supports-highspeed;
>  		card-detect-delay = <200>;
>  		samsung,dw-mshc-ciu-div = <3>;
>  		samsung,dw-mshc-sdr-timing = <2 3>;
> @@ -75,11 +70,8 @@
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>  		vmmc-supply = <&ldo10_reg>;
> -
> -		slot@0 {
> -			reg = <0>;
> -			bus-width = <4>;
> -		};
> +		bus-width = <8>;
<4> is correct?

> +		cap-mmc-highspeed;

Thanks,
Seungwon Jeon

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jaehoon Chung July 7, 2014, 7:33 a.m. UTC | #2 
Hi, Seungwon.

I will fix it, and add  dt-file related with exynos3250. 

Best Regards,
Jaehoon Chung

On 07/07/2014 04:29 PM, Seungwon Jeon wrote:
> Hi Jaehoon,
> 
> Please check one thing below.
> 
> On Mon, June 30, 2014, Jaehoon Chung wrote:
>> dw-mmc controller can support multiple slots.
>> But, there are no use-cases anywhere. So we don't need to support the
>> slot-node for dw-mmc controller.
>> And "supports-highspeed" property in dw-mmc is deprecated.
>> "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
>> Reviewed-by: Tushar Behera <trblinux@gmail.com>
>> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
>> ---
> 
>> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-
>> octa.dts
>> index 434fd9d..5f37b81 100644
>> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
>> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
>> @@ -50,7 +50,6 @@
>>  	mmc@12200000 {
>>  		status = "okay";
>>  		broken-cd;
>> -		supports-highspeed;
>>  		card-detect-delay = <200>;
>>  		samsung,dw-mshc-ciu-div = <3>;
>>  		samsung,dw-mshc-sdr-timing = <0 4>;
>> @@ -58,16 +57,12 @@
>>  		pinctrl-names = "default";
>>  		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
>>  		vmmc-supply = <&ldo10_reg>;
>> -
>> -		slot@0 {
>> -			reg = <0>;
>> -			bus-width = <8>;
>> -		};
>> +		bus-width = <8>;
>> +		cap-mmc-highspeed;
>>  	};
>>
>>  	mmc@12220000 {
>>  		status = "okay";
>> -		supports-highspeed;
>>  		card-detect-delay = <200>;
>>  		samsung,dw-mshc-ciu-div = <3>;
>>  		samsung,dw-mshc-sdr-timing = <2 3>;
>> @@ -75,11 +70,8 @@
>>  		pinctrl-names = "default";
>>  		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>>  		vmmc-supply = <&ldo10_reg>;
>> -
>> -		slot@0 {
>> -			reg = <0>;
>> -			bus-width = <4>;
>> -		};
>> +		bus-width = <8>;
> <4> is correct?
> 
>> +		cap-mmc-highspeed;
> 
> Thanks,
> Seungwon Jeon
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 31db28a..778aec6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -45,17 +45,13 @@ 
 		status = "okay";
 
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	regulator_p3v3 {
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e925c9f..de15114 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -137,17 +137,13 @@ 
 		status = "okay";
 
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	codec@13400000 {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 7787844..65ab885 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -520,7 +520,6 @@ 
 
 	mmc@12550000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		non-removable;
 		card-detect-delay = <200>;
@@ -532,11 +531,8 @@ 
 		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 		pinctrl-names = "default";
 		status = "okay";
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	serial@13800000 {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d0de1f5..42a3590 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -401,7 +401,6 @@ 
 	mmc_0: mmc@12200000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -410,17 +409,13 @@ 
 		vmmc-supply = <&mmc_reg>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc_2: mmc@12220000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -428,12 +423,9 @@ 
 		vmmc-supply = <&mmc_reg>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cap-sd-highspeed;
 	};
 
 	i2s0: i2s@03830000 {
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 89ac90f..af51361 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -248,7 +248,6 @@ 
 
 	mmc@12200000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -256,44 +255,33 @@ 
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc@12220000 {
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			wp-gpios = <&gpc2 1 0>;
-		};
+		bus-width = <4>;
+		wp-gpios = <&gpc2 1 0>;
+		cap-sd-highspeed;
 	};
 
 	mmc@12230000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		/* See board-specific dts files for pin setup */
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <4>;
+		cap-sd-highspeed;
 	};
 
 	spi_1: spi@12d30000 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a70..e00ffc6 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -282,7 +282,6 @@ 
 	mmc@12200000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -290,29 +289,22 @@ 
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc@12220000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cap-sd-highspeed;
 	};
 
 	spi_1: spi@12d30000 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 7bd2df1..fb66005 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -240,10 +240,8 @@ 
 	 */
 	mmc@12230000 {
 		status = "okay";
-		slot@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
 	};
 
 	i2c@12CD0000 {
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 8c84ab2..a803b60 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -69,7 +69,7 @@ 
 	num-slots = <1>;
 	broken-cd;
 	bypass-smu;
-	supports-highspeed;
+	cap-mmc-highspeed;
 	supports-hs200-mode; /* 200 Mhz */
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -77,27 +77,19 @@ 
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
 };
 
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
+	bus-width = <4>;
+	disable-wp;
 };
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 7275bbd..be3e025 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -40,33 +40,25 @@ 
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-mmc-highspeed;
 	broken-cd;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
 };
 
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
+	bus-width = <4>;
+	disable-wp;
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 434fd9d..5f37b81 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -50,7 +50,6 @@ 
 	mmc@12200000 {
 		status = "okay";
 		broken-cd;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <0 4>;
@@ -58,16 +57,12 @@ 
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 		vmmc-supply = <&ldo10_reg>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc@12220000 {
 		status = "okay";
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -75,11 +70,8 @@ 
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 		vmmc-supply = <&ldo10_reg>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	hsi2c_4: i2c@12CA0000 {
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 7649982..76484a6 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -174,7 +174,7 @@ 
 	num-slots = <1>;
 	broken-cd;
 	caps2-mmc-hs200-1_8v;
-	supports-highspeed;
+	cap-mmc-highspeed;
 	non-removable;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
@@ -183,17 +183,13 @@ 
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
 };
 
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -201,11 +197,7 @@ 
 	samsung,dw-mshc-ddr-timing = <1 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
+	bus-width = <4>;
 };
 
 
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 6052aa9..8be3d7b 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -76,34 +76,26 @@ 
 	mmc@12200000 {
 		status = "okay";
 		broken-cd;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <0 4>;
 		samsung,dw-mshc-ddr-timing = <0 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc@12220000 {
 		status = "okay";
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <4>;
+		cap-sd-highspeed;
 	};
 
 	dp-controller@145B0000 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 2c2c137..3c52a81 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -172,7 +172,7 @@ 
 	num-slots = <1>;
 	broken-cd;
 	caps2-mmc-hs200-1_8v;
-	supports-highspeed;
+	cap-mmc-highspeed;
 	non-removable;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
@@ -181,17 +181,13 @@ 
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
 };
 
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -199,11 +195,7 @@ 
 	samsung,dw-mshc-ddr-timing = <1 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
+	bus-width = <4>;
 };