diff mbox

[6/7] ARM: dts: exynos4412-odroid: enable hdmi support

Message ID 1404202211-15788-7-git-send-email-m.szyprowski@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Marek Szyprowski July 1, 2014, 8:10 a.m. UTC 
This patch adds nodes specific to Exynos4412 based Odroid X/X2/U2/U3
boards required for enabling HDMI display.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 52 +++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index d1b33a8efa9d..2856242d640a 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -52,6 +52,14 @@ 
 		};
 	};
 
+	lcd0-power-domain@10023C80 {
+		domain-always-on;
+	};
+
+	tv-power-domain@10023C20 {
+		domain-always-on;
+	};
+
 	watchdog@10060000 {
 		status = "okay";
 	};
@@ -186,6 +194,20 @@ 
 					regulator-always-on;
 				};
 
+				ldo8_reg: ldo@8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VDD10_HDMI_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo10_reg: ldo@10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VDDQ_MIPIHSI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
 				ldo11_reg: LDO11 {
 					regulator-name = "VDD18_ABB1_1.8V";
 					regulator-min-microvolt = <1800000>;
@@ -332,6 +354,31 @@ 
 	ehci: ehci@12580000 {
 		status = "okay";
 	};
+
+	mixer: mixer@12C10000 {
+		status = "okay";
+	};
+
+	hdmi@12D00000 {
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd>;
+		vdd-supply = <&ldo8_reg>;
+		vdd_osc-supply = <&ldo10_reg>;
+		vdd_pll-supply = <&ldo8_reg>;
+		ddc = <&hdmi_ddc>;
+		status = "okay";
+	};
+
+	hdmi_ddc: i2c@13880000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+	};
+
+	i2c@138E0000 {
+		status = "okay";
+	};
 };
 
 &pinctrl_1 {
@@ -339,4 +386,9 @@ 
 		samsung,pins = "gpx1-3";
 		samsung,pin-pud = <0>;
 	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <1>;
+	};
 };