| Message ID | 1405420294-9323-3-git-send-email-vikas.sajjan@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Vikas, On Tue, Jul 15, 2014 at 3:31 AM, Vikas Sajjan <vikas.sajjan@samsung.com> wrote: > The mask-tpm-reset GPIO is used by the kernel to prevent the TPM from > being reset across sleep/wake. If we don't set it to anything then > the TPM will be reset. U-Boot will detect this as invalid > and will reset the system on resume time. This GPIO can always be low > and not hurt anything. It will get pulled back high again during a > normal warm reset when it will default back to an input. > > To properly preserve the TPM state across suspend/resume and to make > the chrome U-Boot happy, properly set the GPIO to mask the > reset to the TPM. > > Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com> > --- > arch/arm/boot/dts/exynos5800-peach-pi.dts | 12 ++++++++++++ > 1 file changed, 12 insertions(+) Reviewed-by: Doug Anderson <dianders@chromium.org> -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 28f2a25..0bc97d9 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -209,6 +209,9 @@ &pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&mask_tpm_reset>; + max98091_irq: max98091-irq { samsung,pins = "gpx0-2"; samsung,pin-function = <0>; @@ -216,6 +219,15 @@ samsung,pin-drv = <0>; }; + /* We need GPX0_6 to be low at sleep time; just keep it low always */ + mask_tpm_reset: mask-tpm-reset { + samsung,pins = "gpx0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <0>; + }; + tpm_irq: tpm-irq { samsung,pins = "gpx1-0"; samsung,pin-function = <0>;
The mask-tpm-reset GPIO is used by the kernel to prevent the TPM from being reset across sleep/wake. If we don't set it to anything then the TPM will be reset. U-Boot will detect this as invalid and will reset the system on resume time. This GPIO can always be low and not hurt anything. It will get pulled back high again during a normal warm reset when it will default back to an input. To properly preserve the TPM state across suspend/resume and to make the chrome U-Boot happy, properly set the GPIO to mask the reset to the TPM. Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com> --- arch/arm/boot/dts/exynos5800-peach-pi.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)