deleted file mode 100644
@@ -1,164 +0,0 @@
-/*
- * Common device tree include for all Exynos 5250 boards based off of Daisy.
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
- aliases {
- };
-
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
- chosen {
- };
-
- pinctrl@11400000 {
- /*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
- i2c2_bus: i2c2-bus {
- samsung,pin-pud = <0>;
- };
- };
-
- i2c@12C60000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
- };
-
- i2c@12C70000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
- };
-
- i2c@12C80000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CA0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CB0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CD0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CE0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- mmc@12200000 {
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
-
- mmc@12220000 {
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
- };
- };
-
- mmc@12230000 {
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- /* See board-specific dts files for pin setup */
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
- };
-
- spi_1: spi@12d30000 {
- status = "okay";
- samsung,spi-src-clk = <0>;
- num-cs = <1>;
- };
-
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
- gpio-key,wakeup;
- };
- };
-};
@@ -10,7 +10,6 @@
/dts-v1/;
#include "exynos5250.dtsi"
-#include "exynos5250-cros-common.dtsi"
/ {
model = "Google Snow";
@@ -20,6 +19,13 @@
i2c104 = &i2c_104;
};
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ };
+
rtc@101E0000 {
status = "okay";
};
@@ -93,6 +99,13 @@
gpio-keys {
compatible = "gpio-keys";
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 1>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
lid-switch {
label = "Lid";
gpios = <&gpx3 5 1>;
@@ -226,24 +239,6 @@
};
};
- mmc@12200000 {
- status = "okay";
- };
-
- mmc@12220000 {
- status = "okay";
- };
-
- /*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
- mmc@12230000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
- };
-
i2c@12CD0000 {
max98095: codec@11 {
compatible = "maxim,max98095";
@@ -292,6 +287,11 @@
};
hdmi {
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
@@ -343,6 +343,10 @@
};
&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
@@ -489,6 +493,10 @@
};
&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
@@ -498,6 +506,118 @@
};
};
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 0>;
+ };
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
&pinctrl_0 {
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
@@ -507,4 +627,10 @@
};
};
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
#include "cros-ec-keyboard.dtsi"
The remaining common ChromeOS pieces are fairly minor. Suggested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Andreas Färber <afaerber@suse.de> --- v2 -> v3: * Renamed subject to match Kukjin's style * Rebased onto MMC pinctrl bug fix (Doug Anderson) v2: New (Doug Anderson) arch/arm/boot/dts/exynos5250-cros-common.dtsi | 164 -------------------------- arch/arm/boot/dts/exynos5250-snow.dts | 164 +++++++++++++++++++++++--- 2 files changed, 145 insertions(+), 183 deletions(-) delete mode 100644 arch/arm/boot/dts/exynos5250-cros-common.dtsi