From patchwork Sat Aug 2 00:52:30 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Andreas_F=C3=A4rber?= X-Patchwork-Id: 4664691 Return-Path: X-Original-To: patchwork-linux-samsung-soc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 0F0BBC0338 for ; Sat, 2 Aug 2014 00:54:04 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id A23232020A for ; Sat, 2 Aug 2014 00:54:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 883B52021B for ; Sat, 2 Aug 2014 00:54:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754723AbaHBAxa (ORCPT ); Fri, 1 Aug 2014 20:53:30 -0400 Received: from cantor2.suse.de ([195.135.220.15]:33686 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754715AbaHBAx1 (ORCPT ); Fri, 1 Aug 2014 20:53:27 -0400 Received: from relay1.suse.de (charybdis-ext.suse.de [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id 07327AD75; Sat, 2 Aug 2014 00:53:26 +0000 (UTC) From: =?UTF-8?q?Andreas=20F=C3=A4rber?= To: linux-samsung-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Stephan van Schaik , Vincent Palatin , Doug Anderson , Javier Martinez Canillas , Tomasz Figa , =?UTF-8?q?Andreas=20F=C3=A4rber?= , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Ben Dooks , Kukjin Kim , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree Date: Sat, 2 Aug 2014 02:52:30 +0200 Message-Id: <1406940750-15880-11-git-send-email-afaerber@suse.de> X-Mailer: git-send-email 1.9.3 In-Reply-To: <1406940750-15880-1-git-send-email-afaerber@suse.de> References: <1406940750-15880-1-git-send-email-afaerber@suse.de> MIME-Version: 1.0 Sender: linux-samsung-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org X-Spam-Status: No, score=-7.6 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Adds initial support for the HP Chromebook 11. Cc: Vincent Palatin Cc: Doug Anderson Cc: Stephan van Schaik Signed-off-by: Andreas Färber Reviewed-by: Tomasz Figa Reviewed-by: Doug Anderson --- v5 -> v6: * Updated for mfc node label * Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson) * Fixed alphabetical order of sd1_* nodes (Doug Anderson) v4 -> v5: * Dropped bogus USB3 regulator (Vincent Palatin, Tomasz Figa) * Fixed USB3503 reset GPIO (Tomasz Figa) * Introduced labels to use new referencing style consistently (Tomasz Figa) * Don't override dp_hpd, moved to pinctrl_0 instead (Tomasz Figa) * mmc_1: Added comment from Snow's mmc_3 (Tomasz Figa / Doug Anderson) * Override /codec samsung,mfc-{l,r} properties for alignment with Arndale * Use more GPIO_ACTIVE_* constants * Use IRQ_TYPE_* constants * Dropped s5m_ prefix for s5m8767 LDO regulator labels (max77686 is gone) * Labeled also all s5m8767 BUCK regulators v3 -> v4: * Fixed samsung,pin-function 1 -> 0 for dp-hpd-gpio * Replaced dp-hpd-gpio with existing dp_hpd, overriding it v2 -> v3: * Use GPIO_ACTIVE_{LOW,HIGH} (Doug Anderson) * Use symbolic KEY_POWER instead of comment * Moved hsic_reset to new USB3503 node's reset-gpios (Vincent Palatin) * Use dp_hpd_gpio for dp-controller (Doug Anderson, Ajay Kumar) * Override sd1_{clk,cmd,cd,bus4} pinctrl similar to Snow (Doug Anderson) * Added ec_irq pinctrl for cros_ec (Doug Anderson) * Reordered nodes to minimize diff against Snow (Doug Anderson) * Dropped obsolete mmc_2 override (Doug Anderson) * Added lid-switch node (Doug Anderson) * Added gpio-keys pinctrl (Doug Anderson) * Added bootargs to avoid empty /chosen node and to document console setting * Renamed s5m8767_pmic node to avoid underscore * Use new style for overriding inherited pinctrl nodes, too * Enable i2s0 node v1 -> v2: * Use label-based overriding/extension of nodes. (Doug Anderson) * Dropped tps65090 for now, until we know where to place it. * Dropped non-Spring nodes from -cros-common.dtsi rather than disabling them. * Enabled a missing MMC node for access to internal storage. * Dropped display-timings from dp-controller node. (Ajay Kumar) arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++ 2 files changed, 537 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 80a781f76e88..dec4c292f63d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts new file mode 100644 index 000000000000..f5566f84d885 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -0,0 +1,536 @@ +/* + * Google Spring board device tree source + * + * Copyright (c) 2013 Google, Inc + * Copyright (c) 2014 SUSE LINUX Products GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include +#include +#include +#include "exynos5250.dtsi" + +/ { + model = "Google Spring"; + compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=tty1"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>, <&lid_irq>; + + power { + label = "Power"; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + usb-hub { + compatible = "smsc,usb3503a"; + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <1>; + samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + s5m8767-pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */ + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */ + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ + + /* + * The following arrays of DVS voltages are not used, since we are + * not using GPIOs to control PMIC bucks, but they must be defined + * to please the driver. + */ + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", + "en32khz_cp", + "en32khz_bt"; + }; + + regulators { + ldo4_reg: LDO4 { + regulator-name = "P1.0V_LDO_OUT4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo5_reg: LDO5 { + regulator-name = "P1.0V_LDO_OUT5"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_mydp"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo17_reg: LDO17 { + regulator-name = "P2.8V_LDO_OUT17"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo25_reg: LDO25 { + regulator-name = "vdd_bridge"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + op_mode = <3>; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.2V_BUCK_OUT6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <0>; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_ummc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + }; + }; +}; + +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; +}; + +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + }; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +/* + * On Spring we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_1 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&pinctrl_0 { + s5m8767_dvs: s5m8767-dvs { + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp-hpd-gpio { + samsung,pins = "gpc3-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + s5m8767_ds: s5m8767-ds { + samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + s5m8767_irq: s5m8767-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + hsic_reset: hsic-reset { + samsung,pins = "gpe1-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&sd1_bus4 { + samsung,pin-drv = <0>; +}; + +&sd1_cd { + samsung,pin-drv = <0>; +}; + +&sd1_clk { + samsung,pin-drv = <0>; +}; + +&sd1_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; +}; + +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; +}; + +#include "cros-ec-keyboard.dtsi"