diff mbox

[PATCHv4,2/4] thermal: exynos: Add support for many TRIMINFO_CTRL registers

Message ID 1408951825-2639-3-git-send-email-cw00.choi@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chanwoo Choi Aug. 25, 2014, 7:30 a.m. UTC 
This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
shift/mask bit operation to set RELOAD feature instead of static value.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos_thermal_common.h |  1 +
 drivers/thermal/samsung/exynos_tmu.c            | 23 ++++++++++++++++++++---
 drivers/thermal/samsung/exynos_tmu.h            |  9 +++++++--
 drivers/thermal/samsung/exynos_tmu_data.c       |  5 ++++-
 drivers/thermal/samsung/exynos_tmu_data.h       |  3 +++
 5 files changed, 35 insertions(+), 6 deletions(-)

Comments

Bartlomiej Zolnierkiewicz Aug. 25, 2014, 10:15 a.m. UTC | #1 
Hi,

On Monday, August 25, 2014 04:30:23 PM Chanwoo Choi wrote:
> This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
> has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
> shift/mask bit operation to set RELOAD feature instead of static value.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
> Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
>  drivers/thermal/samsung/exynos_thermal_common.h |  1 +
>  drivers/thermal/samsung/exynos_tmu.c            | 23 ++++++++++++++++++++---
>  drivers/thermal/samsung/exynos_tmu.h            |  9 +++++++--
>  drivers/thermal/samsung/exynos_tmu_data.c       |  5 ++++-
>  drivers/thermal/samsung/exynos_tmu_data.h       |  3 +++
>  5 files changed, 35 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> index 3eb2ed9..b211976 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -28,6 +28,7 @@
>  #define MAX_TRIP_COUNT	8
>  #define MAX_COOLING_DEVICE 4
>  #define MAX_THRESHOLD_LEVS 5
> +#define MAX_TRIMINFO_CTRL_REG	2
>  
>  #define ACTIVE_INTERVAL 500
>  #define IDLE_INTERVAL 10000
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index acbff14..7234f38 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -147,7 +147,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>  	struct exynos_tmu_platform_data *pdata = data->pdata;
>  	const struct exynos_tmu_registers *reg = pdata->registers;
> -	unsigned int status, trim_info = 0, con;
> +	unsigned int status, trim_info = 0, con, ctrl;
>  	unsigned int rising_threshold = 0, falling_threshold = 0;
>  	int ret = 0, threshold_code, i, trigger_levs = 0;
>  
> @@ -164,8 +164,25 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>  		}
>  	}
>  
> -	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
> -		__raw_writel(1, data->base + reg->triminfo_ctrl);
> +	if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
> +		if (reg->triminfo_ctrl_count > MAX_TRIMINFO_CTRL_REG) {

Please remove this check and MAX_TRIMINFO_CTRL_REG define.

We do not want such runtime checks for development time errors.

> +			ret = -EINVAL;
> +			goto out;
> +		}
> +
> +		for (i = 0; i < reg->triminfo_ctrl_count; i++) {
> +			if (pdata->triminfo_reload[i]) {
> +				ctrl = readl(data->base +
> +						reg->triminfo_ctrl[i]);
> +				ctrl &= ~(reg->triminfo_reload_mask <<
> +						reg->triminfo_reload_shift);
> +				ctrl |= pdata->triminfo_reload[i] <<
> +						reg->triminfo_reload_shift;

triminfo_reload_shift and triminfo_reload_mask variables have always
the same values when this code is run so there is no need for them.

They should be added only when needed instead of doing it now.

> +				__raw_writel(ctrl, data->base +
> +						reg->triminfo_ctrl[i]);
> +			}
> +		}
> +	}
>  
>  	if (pdata->cal_mode == HW_MODE)
>  		goto skip_calib_data;
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index 1b4a644..d7674ad 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -85,8 +85,11 @@ enum soc_type {
>   * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
>   * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
>   * @triminfo_ctrl: trim info controller register.
> + * @triminfo_ctrl_count: the number of trim info controller register.
>   * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
>  	reg.
> + * @triminfo_reload_mask: mask of triminfo reload enable bit in triminfo_ctrl
> +	reg.
>   * @tmu_ctrl: TMU main controller register.
>   * @test_mux_addr_shift: shift bits of test mux address.
>   * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
> @@ -151,9 +154,10 @@ struct exynos_tmu_registers {
>  	u32	triminfo_25_shift;
>  	u32	triminfo_85_shift;
>  
> -	u32	triminfo_ctrl;
> -	u32	triminfo_ctrl1;
> +	u32	triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
> +	u32	triminfo_ctrl_count;
>  	u32	triminfo_reload_shift;
> +	u32	triminfo_reload_mask;
>  
>  	u32	tmu_ctrl;
>  	u32     test_mux_addr_shift;
> @@ -295,6 +299,7 @@ struct exynos_tmu_platform_data {
>  	u8 second_point_trim;
>  	u8 default_temp_offset;
>  	u8 test_mux;
> +	u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
>  
>  	enum calibration_type cal_type;
>  	enum calibration_mode cal_mode;
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index aa8e0de..754c638 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -184,8 +184,10 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>  	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>  	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>  	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
> -	.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
> +	.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON,
> +	.triminfo_ctrl_count = 1,
>  	.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
> +	.triminfo_reload_mask = EXYNOS_TRIMINFO_RELOAD_MASK,
>  	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>  	.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>  	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
> @@ -252,6 +254,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>  		.temp_level = 95, \
>  	}, \
>  	.freq_tab_count = 2, \
> +	.triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
>  	.registers = &exynos4412_tmu_registers, \
>  	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
>  			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index 401bab7..87454f63 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -64,6 +64,9 @@
>  #define EXYNOS_EMUL_CON		0x80
>  
>  #define EXYNOS_TRIMINFO_RELOAD_SHIFT	0
> +#define EXYNOS_TRIMINFO_RELOAD_MASK	0x1
> +#define EXYNOS_TRIMINFO_RELOAD_ENABLE	1
> +#define EXYNOS_TRIMINFO_RELOAD_DISABLE	0

This define is never used please remove it.

>  #define EXYNOS_TRIMINFO_25_SHIFT	0
>  #define EXYNOS_TRIMINFO_85_SHIFT	8
>  #define EXYNOS_TMU_RISE_INT_MASK	0x111

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chanwoo Choi Aug. 25, 2014, 10:37 a.m. UTC | #2 
Hi Bartlomiej,

On 08/25/2014 07:15 PM, Bartlomiej Zolnierkiewicz wrote:
> 
> Hi,
> 
> On Monday, August 25, 2014 04:30:23 PM Chanwoo Choi wrote:
>> This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
>> has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
>> shift/mask bit operation to set RELOAD feature instead of static value.
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
>> Cc: Zhang Rui <rui.zhang@intel.com>
>> Cc: Eduardo Valentin <edubezval@gmail.com>
>> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
>> Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>> ---
>>  drivers/thermal/samsung/exynos_thermal_common.h |  1 +
>>  drivers/thermal/samsung/exynos_tmu.c            | 23 ++++++++++++++++++++---
>>  drivers/thermal/samsung/exynos_tmu.h            |  9 +++++++--
>>  drivers/thermal/samsung/exynos_tmu_data.c       |  5 ++++-
>>  drivers/thermal/samsung/exynos_tmu_data.h       |  3 +++
>>  5 files changed, 35 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
>> index 3eb2ed9..b211976 100644
>> --- a/drivers/thermal/samsung/exynos_thermal_common.h
>> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
>> @@ -28,6 +28,7 @@
>>  #define MAX_TRIP_COUNT	8
>>  #define MAX_COOLING_DEVICE 4
>>  #define MAX_THRESHOLD_LEVS 5
>> +#define MAX_TRIMINFO_CTRL_REG	2
>>  
>>  #define ACTIVE_INTERVAL 500
>>  #define IDLE_INTERVAL 10000
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>> index acbff14..7234f38 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -147,7 +147,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>  	struct exynos_tmu_platform_data *pdata = data->pdata;
>>  	const struct exynos_tmu_registers *reg = pdata->registers;
>> -	unsigned int status, trim_info = 0, con;
>> +	unsigned int status, trim_info = 0, con, ctrl;
>>  	unsigned int rising_threshold = 0, falling_threshold = 0;
>>  	int ret = 0, threshold_code, i, trigger_levs = 0;
>>  
>> @@ -164,8 +164,25 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>>  		}
>>  	}
>>  
>> -	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
>> -		__raw_writel(1, data->base + reg->triminfo_ctrl);
>> +	if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
>> +		if (reg->triminfo_ctrl_count > MAX_TRIMINFO_CTRL_REG) {
> 
> Please remove this check and MAX_TRIMINFO_CTRL_REG define.
> 
> We do not want such runtime checks for development time errors.

OK, I'll remove it.

> 
>> +			ret = -EINVAL;
>> +			goto out;
>> +		}
>> +
>> +		for (i = 0; i < reg->triminfo_ctrl_count; i++) {
>> +			if (pdata->triminfo_reload[i]) {
>> +				ctrl = readl(data->base +
>> +						reg->triminfo_ctrl[i]);
>> +				ctrl &= ~(reg->triminfo_reload_mask <<
>> +						reg->triminfo_reload_shift);
>> +				ctrl |= pdata->triminfo_reload[i] <<
>> +						reg->triminfo_reload_shift;
> 
> triminfo_reload_shift and triminfo_reload_mask variables have always
> the same values when this code is run so there is no need for them.

I don't understand. Do you mean that timinfo_reload_{shift/mask} variable is un-needed?
If you possible, I need more detailed comment.

> 
> They should be added only when needed instead of doing it now.
> 
>> +				__raw_writel(ctrl, data->base +
>> +						reg->triminfo_ctrl[i]);
>> +			}
>> +		}
>> +	}
>>  
>>  	if (pdata->cal_mode == HW_MODE)
>>  		goto skip_calib_data;
>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
>> index 1b4a644..d7674ad 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.h
>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>> @@ -85,8 +85,11 @@ enum soc_type {
>>   * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
>>   * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
>>   * @triminfo_ctrl: trim info controller register.
>> + * @triminfo_ctrl_count: the number of trim info controller register.
>>   * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
>>  	reg.
>> + * @triminfo_reload_mask: mask of triminfo reload enable bit in triminfo_ctrl
>> +	reg.
>>   * @tmu_ctrl: TMU main controller register.
>>   * @test_mux_addr_shift: shift bits of test mux address.
>>   * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
>> @@ -151,9 +154,10 @@ struct exynos_tmu_registers {
>>  	u32	triminfo_25_shift;
>>  	u32	triminfo_85_shift;
>>  
>> -	u32	triminfo_ctrl;
>> -	u32	triminfo_ctrl1;
>> +	u32	triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
>> +	u32	triminfo_ctrl_count;
>>  	u32	triminfo_reload_shift;
>> +	u32	triminfo_reload_mask;
>>  
>>  	u32	tmu_ctrl;
>>  	u32     test_mux_addr_shift;
>> @@ -295,6 +299,7 @@ struct exynos_tmu_platform_data {
>>  	u8 second_point_trim;
>>  	u8 default_temp_offset;
>>  	u8 test_mux;
>> +	u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
>>  
>>  	enum calibration_type cal_type;
>>  	enum calibration_mode cal_mode;
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>> index aa8e0de..754c638 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>> @@ -184,8 +184,10 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>>  	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>>  	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>>  	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>> -	.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
>> +	.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON,
>> +	.triminfo_ctrl_count = 1,
>>  	.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
>> +	.triminfo_reload_mask = EXYNOS_TRIMINFO_RELOAD_MASK,
>>  	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>>  	.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>>  	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>> @@ -252,6 +254,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>>  		.temp_level = 95, \
>>  	}, \
>>  	.freq_tab_count = 2, \
>> +	.triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
>>  	.registers = &exynos4412_tmu_registers, \
>>  	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
>>  			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>> index 401bab7..87454f63 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.h
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>> @@ -64,6 +64,9 @@
>>  #define EXYNOS_EMUL_CON		0x80
>>  
>>  #define EXYNOS_TRIMINFO_RELOAD_SHIFT	0
>> +#define EXYNOS_TRIMINFO_RELOAD_MASK	0x1
>> +#define EXYNOS_TRIMINFO_RELOAD_ENABLE	1
>> +#define EXYNOS_TRIMINFO_RELOAD_DISABLE	0
> 
> This define is never used please remove it.

OK, I'll remove it. Thanks.

Beset Regards,
Chanwoo CHoi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bartlomiej Zolnierkiewicz Aug. 25, 2014, 11:19 a.m. UTC | #3 
On Monday, August 25, 2014 07:37:25 PM Chanwoo Choi wrote:
> Hi Bartlomiej,
> 
> On 08/25/2014 07:15 PM, Bartlomiej Zolnierkiewicz wrote:
> > 
> > Hi,
> > 
> > On Monday, August 25, 2014 04:30:23 PM Chanwoo Choi wrote:
> >> This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
> >> has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
> >> shift/mask bit operation to set RELOAD feature instead of static value.
> >>
> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> >> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> >> Cc: Zhang Rui <rui.zhang@intel.com>
> >> Cc: Eduardo Valentin <edubezval@gmail.com>
> >> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
> >> Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> >> ---
> >>  drivers/thermal/samsung/exynos_thermal_common.h |  1 +
> >>  drivers/thermal/samsung/exynos_tmu.c            | 23 ++++++++++++++++++++---
> >>  drivers/thermal/samsung/exynos_tmu.h            |  9 +++++++--
> >>  drivers/thermal/samsung/exynos_tmu_data.c       |  5 ++++-
> >>  drivers/thermal/samsung/exynos_tmu_data.h       |  3 +++
> >>  5 files changed, 35 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> >> index 3eb2ed9..b211976 100644
> >> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> >> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> >> @@ -28,6 +28,7 @@
> >>  #define MAX_TRIP_COUNT	8
> >>  #define MAX_COOLING_DEVICE 4
> >>  #define MAX_THRESHOLD_LEVS 5
> >> +#define MAX_TRIMINFO_CTRL_REG	2
> >>  
> >>  #define ACTIVE_INTERVAL 500
> >>  #define IDLE_INTERVAL 10000
> >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> >> index acbff14..7234f38 100644
> >> --- a/drivers/thermal/samsung/exynos_tmu.c
> >> +++ b/drivers/thermal/samsung/exynos_tmu.c
> >> @@ -147,7 +147,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> >>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> >>  	struct exynos_tmu_platform_data *pdata = data->pdata;
> >>  	const struct exynos_tmu_registers *reg = pdata->registers;
> >> -	unsigned int status, trim_info = 0, con;
> >> +	unsigned int status, trim_info = 0, con, ctrl;
> >>  	unsigned int rising_threshold = 0, falling_threshold = 0;
> >>  	int ret = 0, threshold_code, i, trigger_levs = 0;
> >>  
> >> @@ -164,8 +164,25 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> >>  		}
> >>  	}
> >>  
> >> -	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
> >> -		__raw_writel(1, data->base + reg->triminfo_ctrl);
> >> +	if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
> >> +		if (reg->triminfo_ctrl_count > MAX_TRIMINFO_CTRL_REG) {
> > 
> > Please remove this check and MAX_TRIMINFO_CTRL_REG define.
> > 
> > We do not want such runtime checks for development time errors.
> 
> OK, I'll remove it.
> 
> > 
> >> +			ret = -EINVAL;
> >> +			goto out;
> >> +		}
> >> +
> >> +		for (i = 0; i < reg->triminfo_ctrl_count; i++) {
> >> +			if (pdata->triminfo_reload[i]) {
> >> +				ctrl = readl(data->base +
> >> +						reg->triminfo_ctrl[i]);
> >> +				ctrl &= ~(reg->triminfo_reload_mask <<
> >> +						reg->triminfo_reload_shift);
> >> +				ctrl |= pdata->triminfo_reload[i] <<
> >> +						reg->triminfo_reload_shift;
> > 
> > triminfo_reload_shift and triminfo_reload_mask variables have always
> > the same values when this code is run so there is no need for them.
> 
> I don't understand. Do you mean that timinfo_reload_{shift/mask} variable is un-needed?

Yes.

> If you possible, I need more detailed comment.

Currently triminfo_reload_shift is always "0" and triminfo_reload_mask
is "1" so there is no need to add an abstraction for different SoCs
(it should be added only when there is a real need for it).

Please just rewrite this code as:

			if (pdata->triminfo_reload[i]) {
				ctrl = readl(data->base +
						reg->triminfo_ctrl[i]);
				ctrl |= pdata->triminfo_reload[i];
				__raw_writel(ctrl, data->base +
						reg->triminfo_ctrl[i]);
			}

Then you can remove unused triminfo_reload_shift and
EXYNOS_TRIMINFO_RELOAD_SHIFT.

Please also include my patch (https://lkml.org/lkml/2014/8/20/481) in
your patch series (or at least mark it in the cover letter that my
patch should be merged before your patch #2/4).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> > They should be added only when needed instead of doing it now.
> > 
> >> +				__raw_writel(ctrl, data->base +
> >> +						reg->triminfo_ctrl[i]);
> >> +			}
> >> +		}
> >> +	}
> >>  
> >>  	if (pdata->cal_mode == HW_MODE)
> >>  		goto skip_calib_data;
> >> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> >> index 1b4a644..d7674ad 100644
> >> --- a/drivers/thermal/samsung/exynos_tmu.h
> >> +++ b/drivers/thermal/samsung/exynos_tmu.h
> >> @@ -85,8 +85,11 @@ enum soc_type {
> >>   * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
> >>   * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
> >>   * @triminfo_ctrl: trim info controller register.
> >> + * @triminfo_ctrl_count: the number of trim info controller register.
> >>   * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
> >>  	reg.
> >> + * @triminfo_reload_mask: mask of triminfo reload enable bit in triminfo_ctrl
> >> +	reg.
> >>   * @tmu_ctrl: TMU main controller register.
> >>   * @test_mux_addr_shift: shift bits of test mux address.
> >>   * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
> >> @@ -151,9 +154,10 @@ struct exynos_tmu_registers {
> >>  	u32	triminfo_25_shift;
> >>  	u32	triminfo_85_shift;
> >>  
> >> -	u32	triminfo_ctrl;
> >> -	u32	triminfo_ctrl1;
> >> +	u32	triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
> >> +	u32	triminfo_ctrl_count;
> >>  	u32	triminfo_reload_shift;
> >> +	u32	triminfo_reload_mask;
> >>  
> >>  	u32	tmu_ctrl;
> >>  	u32     test_mux_addr_shift;
> >> @@ -295,6 +299,7 @@ struct exynos_tmu_platform_data {
> >>  	u8 second_point_trim;
> >>  	u8 default_temp_offset;
> >>  	u8 test_mux;
> >> +	u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
> >>  
> >>  	enum calibration_type cal_type;
> >>  	enum calibration_mode cal_mode;
> >> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> >> index aa8e0de..754c638 100644
> >> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> >> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> >> @@ -184,8 +184,10 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
> >>  	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
> >>  	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
> >>  	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
> >> -	.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
> >> +	.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON,
> >> +	.triminfo_ctrl_count = 1,
> >>  	.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
> >> +	.triminfo_reload_mask = EXYNOS_TRIMINFO_RELOAD_MASK,
> >>  	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
> >>  	.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
> >>  	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
> >> @@ -252,6 +254,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
> >>  		.temp_level = 95, \
> >>  	}, \
> >>  	.freq_tab_count = 2, \
> >> +	.triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
> >>  	.registers = &exynos4412_tmu_registers, \
> >>  	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
> >>  			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
> >> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> >> index 401bab7..87454f63 100644
> >> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> >> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> >> @@ -64,6 +64,9 @@
> >>  #define EXYNOS_EMUL_CON		0x80
> >>  
> >>  #define EXYNOS_TRIMINFO_RELOAD_SHIFT	0
> >> +#define EXYNOS_TRIMINFO_RELOAD_MASK	0x1
> >> +#define EXYNOS_TRIMINFO_RELOAD_ENABLE	1
> >> +#define EXYNOS_TRIMINFO_RELOAD_DISABLE	0
> > 
> > This define is never used please remove it.
> 
> OK, I'll remove it. Thanks.
> 
> Beset Regards,
> Chanwoo CHoi

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bartlomiej Zolnierkiewicz Aug. 25, 2014, 11:28 a.m. UTC | #4 
On Monday, August 25, 2014 01:19:04 PM Bartlomiej Zolnierkiewicz wrote:
> On Monday, August 25, 2014 07:37:25 PM Chanwoo Choi wrote:
> > Hi Bartlomiej,
> > 
> > On 08/25/2014 07:15 PM, Bartlomiej Zolnierkiewicz wrote:
> > > 
> > > Hi,
> > > 
> > > On Monday, August 25, 2014 04:30:23 PM Chanwoo Choi wrote:
> > >> This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
> > >> has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
> > >> shift/mask bit operation to set RELOAD feature instead of static value.
> > >>
> > >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> > >> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> > >> Cc: Zhang Rui <rui.zhang@intel.com>
> > >> Cc: Eduardo Valentin <edubezval@gmail.com>
> > >> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
> > >> Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> > >> ---
> > >>  drivers/thermal/samsung/exynos_thermal_common.h |  1 +
> > >>  drivers/thermal/samsung/exynos_tmu.c            | 23 ++++++++++++++++++++---
> > >>  drivers/thermal/samsung/exynos_tmu.h            |  9 +++++++--
> > >>  drivers/thermal/samsung/exynos_tmu_data.c       |  5 ++++-
> > >>  drivers/thermal/samsung/exynos_tmu_data.h       |  3 +++
> > >>  5 files changed, 35 insertions(+), 6 deletions(-)
> > >>
> > >> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> > >> index 3eb2ed9..b211976 100644
> > >> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> > >> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> > >> @@ -28,6 +28,7 @@
> > >>  #define MAX_TRIP_COUNT	8
> > >>  #define MAX_COOLING_DEVICE 4
> > >>  #define MAX_THRESHOLD_LEVS 5
> > >> +#define MAX_TRIMINFO_CTRL_REG	2
> > >>  
> > >>  #define ACTIVE_INTERVAL 500
> > >>  #define IDLE_INTERVAL 10000
> > >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> > >> index acbff14..7234f38 100644
> > >> --- a/drivers/thermal/samsung/exynos_tmu.c
> > >> +++ b/drivers/thermal/samsung/exynos_tmu.c
> > >> @@ -147,7 +147,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> > >>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> > >>  	struct exynos_tmu_platform_data *pdata = data->pdata;
> > >>  	const struct exynos_tmu_registers *reg = pdata->registers;
> > >> -	unsigned int status, trim_info = 0, con;
> > >> +	unsigned int status, trim_info = 0, con, ctrl;
> > >>  	unsigned int rising_threshold = 0, falling_threshold = 0;
> > >>  	int ret = 0, threshold_code, i, trigger_levs = 0;
> > >>  
> > >> @@ -164,8 +164,25 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> > >>  		}
> > >>  	}
> > >>  
> > >> -	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
> > >> -		__raw_writel(1, data->base + reg->triminfo_ctrl);
> > >> +	if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
> > >> +		if (reg->triminfo_ctrl_count > MAX_TRIMINFO_CTRL_REG) {
> > > 
> > > Please remove this check and MAX_TRIMINFO_CTRL_REG define.
> > > 
> > > We do not want such runtime checks for development time errors.
> > 
> > OK, I'll remove it.
> > 
> > > 
> > >> +			ret = -EINVAL;
> > >> +			goto out;
> > >> +		}
> > >> +
> > >> +		for (i = 0; i < reg->triminfo_ctrl_count; i++) {
> > >> +			if (pdata->triminfo_reload[i]) {
> > >> +				ctrl = readl(data->base +
> > >> +						reg->triminfo_ctrl[i]);
> > >> +				ctrl &= ~(reg->triminfo_reload_mask <<
> > >> +						reg->triminfo_reload_shift);
> > >> +				ctrl |= pdata->triminfo_reload[i] <<
> > >> +						reg->triminfo_reload_shift;
> > > 
> > > triminfo_reload_shift and triminfo_reload_mask variables have always
> > > the same values when this code is run so there is no need for them.
> > 
> > I don't understand. Do you mean that timinfo_reload_{shift/mask} variable is un-needed?
> 
> Yes.
> 
> > If you possible, I need more detailed comment.
> 
> Currently triminfo_reload_shift is always "0" and triminfo_reload_mask
> is "1" so there is no need to add an abstraction for different SoCs
> (it should be added only when there is a real need for it).
> 
> Please just rewrite this code as:
> 
> 			if (pdata->triminfo_reload[i]) {
> 				ctrl = readl(data->base +
> 						reg->triminfo_ctrl[i]);
> 				ctrl |= pdata->triminfo_reload[i];
> 				__raw_writel(ctrl, data->base +
> 						reg->triminfo_ctrl[i]);
> 			}

or even better lets get rid of the only __raw_writel() call in Exynos
thermal driver while at it:

			if (pdata->triminfo_reload[i]) {
				ctrl = readl(data->base +
						reg->triminfo_ctrl[i]);
				ctrl |= pdata->triminfo_reload[i];
				writel(ctrl, data->base +
						reg->triminfo_ctrl[i]);
			}

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chanwoo Choi Aug. 25, 2014, 11:49 a.m. UTC | #5 
On 08/25/2014 08:19 PM, Bartlomiej Zolnierkiewicz wrote:
> On Monday, August 25, 2014 07:37:25 PM Chanwoo Choi wrote:
>> Hi Bartlomiej,
>>
>> On 08/25/2014 07:15 PM, Bartlomiej Zolnierkiewicz wrote:
>>>
>>> Hi,
>>>
>>> On Monday, August 25, 2014 04:30:23 PM Chanwoo Choi wrote:
>>>> This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
>>>> has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
>>>> shift/mask bit operation to set RELOAD feature instead of static value.
>>>>
>>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>>>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
>>>> Cc: Zhang Rui <rui.zhang@intel.com>
>>>> Cc: Eduardo Valentin <edubezval@gmail.com>
>>>> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
>>>> Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>>>> ---
>>>>  drivers/thermal/samsung/exynos_thermal_common.h |  1 +
>>>>  drivers/thermal/samsung/exynos_tmu.c            | 23 ++++++++++++++++++++---
>>>>  drivers/thermal/samsung/exynos_tmu.h            |  9 +++++++--
>>>>  drivers/thermal/samsung/exynos_tmu_data.c       |  5 ++++-
>>>>  drivers/thermal/samsung/exynos_tmu_data.h       |  3 +++
>>>>  5 files changed, 35 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
>>>> index 3eb2ed9..b211976 100644
>>>> --- a/drivers/thermal/samsung/exynos_thermal_common.h
>>>> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
>>>> @@ -28,6 +28,7 @@
>>>>  #define MAX_TRIP_COUNT	8
>>>>  #define MAX_COOLING_DEVICE 4
>>>>  #define MAX_THRESHOLD_LEVS 5
>>>> +#define MAX_TRIMINFO_CTRL_REG	2
>>>>  
>>>>  #define ACTIVE_INTERVAL 500
>>>>  #define IDLE_INTERVAL 10000
>>>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>>>> index acbff14..7234f38 100644
>>>> --- a/drivers/thermal/samsung/exynos_tmu.c
>>>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>>>> @@ -147,7 +147,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>>>>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>>>  	struct exynos_tmu_platform_data *pdata = data->pdata;
>>>>  	const struct exynos_tmu_registers *reg = pdata->registers;
>>>> -	unsigned int status, trim_info = 0, con;
>>>> +	unsigned int status, trim_info = 0, con, ctrl;
>>>>  	unsigned int rising_threshold = 0, falling_threshold = 0;
>>>>  	int ret = 0, threshold_code, i, trigger_levs = 0;
>>>>  
>>>> @@ -164,8 +164,25 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>>>>  		}
>>>>  	}
>>>>  
>>>> -	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
>>>> -		__raw_writel(1, data->base + reg->triminfo_ctrl);
>>>> +	if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
>>>> +		if (reg->triminfo_ctrl_count > MAX_TRIMINFO_CTRL_REG) {
>>>
>>> Please remove this check and MAX_TRIMINFO_CTRL_REG define.
>>>
>>> We do not want such runtime checks for development time errors.
>>
>> OK, I'll remove it.
>>
>>>
>>>> +			ret = -EINVAL;
>>>> +			goto out;
>>>> +		}
>>>> +
>>>> +		for (i = 0; i < reg->triminfo_ctrl_count; i++) {
>>>> +			if (pdata->triminfo_reload[i]) {
>>>> +				ctrl = readl(data->base +
>>>> +						reg->triminfo_ctrl[i]);
>>>> +				ctrl &= ~(reg->triminfo_reload_mask <<
>>>> +						reg->triminfo_reload_shift);
>>>> +				ctrl |= pdata->triminfo_reload[i] <<
>>>> +						reg->triminfo_reload_shift;
>>>
>>> triminfo_reload_shift and triminfo_reload_mask variables have always
>>> the same values when this code is run so there is no need for them.
>>
>> I don't understand. Do you mean that timinfo_reload_{shift/mask} variable is un-needed?
> 
> Yes.
> 
>> If you possible, I need more detailed comment.
> 
> Currently triminfo_reload_shift is always "0" and triminfo_reload_mask
> is "1" so there is no need to add an abstraction for different SoCs
> (it should be added only when there is a real need for it).
> 
> Please just rewrite this code as:
> 
> 			if (pdata->triminfo_reload[i]) {
> 				ctrl = readl(data->base +
> 						reg->triminfo_ctrl[i]);
> 				ctrl |= pdata->triminfo_reload[i];
> 				__raw_writel(ctrl, data->base +
> 						reg->triminfo_ctrl[i]);
> 			}
> 
> Then you can remove unused triminfo_reload_shift and
> EXYNOS_TRIMINFO_RELOAD_SHIFT.
> 
> Please also include my patch (https://lkml.org/lkml/2014/8/20/481) in
> your patch series (or at least mark it in the cover letter that my
> patch should be merged before your patch #2/4).

OK. thanks for your comment.

Best Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
index 3eb2ed9..b211976 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.h
+++ b/drivers/thermal/samsung/exynos_thermal_common.h
@@ -28,6 +28,7 @@ 
 #define MAX_TRIP_COUNT	8
 #define MAX_COOLING_DEVICE 4
 #define MAX_THRESHOLD_LEVS 5
+#define MAX_TRIMINFO_CTRL_REG	2
 
 #define ACTIVE_INTERVAL 500
 #define IDLE_INTERVAL 10000
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index acbff14..7234f38 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -147,7 +147,7 @@  static int exynos_tmu_initialize(struct platform_device *pdev)
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct exynos_tmu_platform_data *pdata = data->pdata;
 	const struct exynos_tmu_registers *reg = pdata->registers;
-	unsigned int status, trim_info = 0, con;
+	unsigned int status, trim_info = 0, con, ctrl;
 	unsigned int rising_threshold = 0, falling_threshold = 0;
 	int ret = 0, threshold_code, i, trigger_levs = 0;
 
@@ -164,8 +164,25 @@  static int exynos_tmu_initialize(struct platform_device *pdev)
 		}
 	}
 
-	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
-		__raw_writel(1, data->base + reg->triminfo_ctrl);
+	if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
+		if (reg->triminfo_ctrl_count > MAX_TRIMINFO_CTRL_REG) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		for (i = 0; i < reg->triminfo_ctrl_count; i++) {
+			if (pdata->triminfo_reload[i]) {
+				ctrl = readl(data->base +
+						reg->triminfo_ctrl[i]);
+				ctrl &= ~(reg->triminfo_reload_mask <<
+						reg->triminfo_reload_shift);
+				ctrl |= pdata->triminfo_reload[i] <<
+						reg->triminfo_reload_shift;
+				__raw_writel(ctrl, data->base +
+						reg->triminfo_ctrl[i]);
+			}
+		}
+	}
 
 	if (pdata->cal_mode == HW_MODE)
 		goto skip_calib_data;
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 1b4a644..d7674ad 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -85,8 +85,11 @@  enum soc_type {
  * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
  * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
  * @triminfo_ctrl: trim info controller register.
+ * @triminfo_ctrl_count: the number of trim info controller register.
  * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
 	reg.
+ * @triminfo_reload_mask: mask of triminfo reload enable bit in triminfo_ctrl
+	reg.
  * @tmu_ctrl: TMU main controller register.
  * @test_mux_addr_shift: shift bits of test mux address.
  * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
@@ -151,9 +154,10 @@  struct exynos_tmu_registers {
 	u32	triminfo_25_shift;
 	u32	triminfo_85_shift;
 
-	u32	triminfo_ctrl;
-	u32	triminfo_ctrl1;
+	u32	triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
+	u32	triminfo_ctrl_count;
 	u32	triminfo_reload_shift;
+	u32	triminfo_reload_mask;
 
 	u32	tmu_ctrl;
 	u32     test_mux_addr_shift;
@@ -295,6 +299,7 @@  struct exynos_tmu_platform_data {
 	u8 second_point_trim;
 	u8 default_temp_offset;
 	u8 test_mux;
+	u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
 
 	enum calibration_type cal_type;
 	enum calibration_mode cal_mode;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index aa8e0de..754c638 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -184,8 +184,10 @@  static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
 	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
 	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
-	.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
+	.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON,
+	.triminfo_ctrl_count = 1,
 	.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
+	.triminfo_reload_mask = EXYNOS_TRIMINFO_RELOAD_MASK,
 	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
 	.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
 	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
@@ -252,6 +254,7 @@  static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 		.temp_level = 95, \
 	}, \
 	.freq_tab_count = 2, \
+	.triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
 	.registers = &exynos4412_tmu_registers, \
 	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
 			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index 401bab7..87454f63 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -64,6 +64,9 @@ 
 #define EXYNOS_EMUL_CON		0x80
 
 #define EXYNOS_TRIMINFO_RELOAD_SHIFT	0
+#define EXYNOS_TRIMINFO_RELOAD_MASK	0x1
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE	1
+#define EXYNOS_TRIMINFO_RELOAD_DISABLE	0
 #define EXYNOS_TRIMINFO_25_SHIFT	0
 #define EXYNOS_TRIMINFO_85_SHIFT	8
 #define EXYNOS_TMU_RISE_INT_MASK	0x111