@@ -330,7 +330,22 @@ static struct regulator_ops max77802_buck_16_dvs_ops = {
.set_suspend_disable = max77802_set_suspend_disable,
};
-/* BUCKs 2-4, 5, 7-10 */
+/* BUCKs 2-4 */
+static struct regulator_ops max77802_buck_234_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77802_set_ramp_delay_2bit,
+ .set_suspend_enable = max77802_enable,
+ .set_suspend_disable = max77802_set_suspend_disable,
+};
+
+/* BUCKs 5, 7-10 */
static struct regulator_ops max77802_buck_dvs_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -404,7 +419,7 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.name = "BUCK"#num, \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
- .ops = &max77802_buck_dvs_ops, \
+ .ops = &max77802_buck_234_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = 600000, \
Not all the max77802 BUCKs regulators have the same functionality, for example BUCKs 2-4 support the output to be configured as normal or Low Power Mode by the PWRREQ enable pin while the other BUCKs only support their output to be set ON or OFF by PWRREQ. As a preparation for adding a set_suspend_mode function handler for all the regulators that support Low Power Mode by PWRREQ, split the operations for BUCKs regulators. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- drivers/regulator/max77802.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)