@@ -66,6 +66,10 @@ Optional properties for dp-controller:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug
detection
+ -video interfaces: Device node can contain video interface port
+ nodes according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
@@ -105,4 +109,12 @@ Board Specific portion:
vsync-len = <6>;
};
};
+
+ ports {
+ port@0 {
+ dp_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
};
@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/of_graph.h>
#include <linux/gpio.h>
#include <linux/component.h>
#include <linux/phy/phy.h>
@@ -989,9 +990,19 @@ static struct drm_connector_helper_funcs exynos_dp_connector_helper_funcs = {
};
/* returns the number of bridges attached */
-static int exynos_drm_attach_lcd_bridge(struct drm_device *dev,
+static int exynos_drm_attach_lcd_bridge(struct exynos_dp_device *dp,
struct drm_encoder *encoder)
{
+ int ret;
+
+ encoder->bridge = dp->bridge;
+ dp->bridge->encoder = encoder;
+ ret = drm_bridge_attach(encoder->dev, dp->bridge);
+ if (ret) {
+ DRM_ERROR("Failed to attach bridge to drm\n");
+ return ret;
+ }
+
return 0;
}
@@ -1005,9 +1016,11 @@ static int exynos_dp_create_connector(struct exynos_drm_display *display,
dp->encoder = encoder;
/* Pre-empt DP connector creation if there's a bridge */
- ret = exynos_drm_attach_lcd_bridge(dp->drm_dev, encoder);
- if (ret)
- return 0;
+ if (dp->bridge) {
+ ret = exynos_drm_attach_lcd_bridge(dp, encoder);
+ if (!ret)
+ return 0;
+ }
connector->polled = DRM_CONNECTOR_POLL_HPD;
@@ -1259,7 +1272,7 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
if (ret)
return ret;
- if (!dp->panel) {
+ if (!dp->panel && !dp->bridge) {
ret = exynos_dp_dt_parse_panel(dp);
if (ret)
return ret;
@@ -1345,7 +1358,7 @@ static const struct component_ops exynos_dp_ops = {
static int exynos_dp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *panel_node;
+ struct device_node *panel_node, *bridge_node, *endpoint;
struct exynos_dp_device *dp;
int ret;
@@ -1367,6 +1380,18 @@ static int exynos_dp_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
+ endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
+ if (endpoint) {
+ bridge_node = of_graph_get_remote_port_parent(endpoint);
+ if (bridge_node) {
+ dp->bridge = of_drm_find_bridge(bridge_node);
+ of_node_put(bridge_node);
+ if (!dp->bridge)
+ return -EPROBE_DEFER;
+ } else
+ return -EPROBE_DEFER;
+ }
+
exynos_dp_display.ctx = dp;
ret = component_add(&pdev->dev, &exynos_dp_ops);
@@ -150,6 +150,7 @@ struct exynos_dp_device {
struct drm_connector connector;
struct drm_encoder *encoder;
struct drm_panel *panel;
+ struct drm_bridge *bridge;
struct clk *clock;
unsigned int irq;
void __iomem *reg_base;
Modify driver to support drm_bridge. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> --- .../devicetree/bindings/video/exynos_dp.txt | 12 +++++++ drivers/gpu/drm/exynos/exynos_dp_core.c | 37 ++++++++++++++++---- drivers/gpu/drm/exynos/exynos_dp_core.h | 1 + 3 files changed, 44 insertions(+), 6 deletions(-)