diff mbox

[RESEND] serial: samsung: Fix serial config dependencies for exynos7

Message ID 1416199491-4841-1-git-send-email-a.kesavan@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Abhilash Kesavan Nov. 17, 2014, 4:44 a.m. UTC
From: Pankaj Dubey <pankaj.dubey@samsung.com>

Exynos7 has a similar serial controller to that present in older Samsung
SoCs. To re-use the existing serial driver on Exynos7 we need to have
SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not
possible because these symbols are dependent on PLAT_SAMSUNG which is
not present for the ARMv8 based exynos7.

Change the dependency of these symbols from PLAT_SAMSUNG to the serial
driver thus making it available on exynos7. As the existing platform
specific code making use of these symbols is related to uart driver this
change in dependency should not cause any issues.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Re-sending as the previous version did not reach Greg KH.

 drivers/tty/serial/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Greg Kroah-Hartman Nov. 17, 2014, 6:59 p.m. UTC | #1
On Mon, Nov 17, 2014 at 10:14:51AM +0530, Abhilash Kesavan wrote:
> From: Pankaj Dubey <pankaj.dubey@samsung.com>
> 
> Exynos7 has a similar serial controller to that present in older Samsung
> SoCs. To re-use the existing serial driver on Exynos7 we need to have
> SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not
> possible because these symbols are dependent on PLAT_SAMSUNG which is
> not present for the ARMv8 based exynos7.
> 
> Change the dependency of these symbols from PLAT_SAMSUNG to the serial
> driver thus making it available on exynos7. As the existing platform
> specific code making use of these symbols is related to uart driver this
> change in dependency should not cause any issues.
> 
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kim Kukjin Nov. 19, 2014, 7:28 a.m. UTC | #2
On 11/18/14 03:59, Greg KH wrote:
> On Mon, Nov 17, 2014 at 10:14:51AM +0530, Abhilash Kesavan wrote:
>> From: Pankaj Dubey <pankaj.dubey@samsung.com>
>>
>> Exynos7 has a similar serial controller to that present in older Samsung
>> SoCs. To re-use the existing serial driver on Exynos7 we need to have
>> SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not
>> possible because these symbols are dependent on PLAT_SAMSUNG which is
>> not present for the ARMv8 based exynos7.
>>
>> Change the dependency of these symbols from PLAT_SAMSUNG to the serial
>> driver thus making it available on exynos7. As the existing platform
>> specific code making use of these symbols is related to uart driver this
>> change in dependency should not cause any issues.
>>
>> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
>> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> ---
> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
Greg, thanks for your ack on this.

Abhilash,

I can't find the original patch in my mailbox, can you please re-send to
me with adding Greg's ack?

Thanks,
Kukjin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Abhilash Kesavan Nov. 19, 2014, 7:51 a.m. UTC | #3
Hi Kukjin,

On Wed, Nov 19, 2014 at 12:58 PM, Kukjin Kim <kgene.kim@samsung.com> wrote:
> On 11/18/14 03:59, Greg KH wrote:
>> On Mon, Nov 17, 2014 at 10:14:51AM +0530, Abhilash Kesavan wrote:
>>> From: Pankaj Dubey <pankaj.dubey@samsung.com>
>>>
>>> Exynos7 has a similar serial controller to that present in older Samsung
>>> SoCs. To re-use the existing serial driver on Exynos7 we need to have
>>> SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not
>>> possible because these symbols are dependent on PLAT_SAMSUNG which is
>>> not present for the ARMv8 based exynos7.
>>>
>>> Change the dependency of these symbols from PLAT_SAMSUNG to the serial
>>> driver thus making it available on exynos7. As the existing platform
>>> specific code making use of these symbols is related to uart driver this
>>> change in dependency should not cause any issues.
>>>
>>> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
>>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
>>> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
>>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>> ---
>> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>
> Greg, thanks for your ack on this.
>
> Abhilash,
>
> I can't find the original patch in my mailbox, can you please re-send to
> me with adding Greg's ack?

Will send it you with Greg's Ack.

Thanks,
Abhilash
>
> Thanks,
> Kukjin
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e71a28b..d0ce88c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -249,14 +249,14 @@  config SERIAL_SAMSUNG
 
 config SERIAL_SAMSUNG_UARTS_4
 	bool
-	depends on PLAT_SAMSUNG
+	depends on SERIAL_SAMSUNG
 	default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
 	help
 	  Internal node for the common case of 4 Samsung compatible UARTs
 
 config SERIAL_SAMSUNG_UARTS
 	int
-	depends on PLAT_SAMSUNG
+	depends on SERIAL_SAMSUNG
 	default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
 	default 3
 	help