diff mbox

[9/9] drm/exynos: dsi: set TE GPIO IRQ status as IRQ_NOAUTOEN

Message ID 1416229216-32018-10-git-send-email-yj44.cho@samsung.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

YoungJun Cho Nov. 17, 2014, 1 p.m. UTC 
The exynos_dsi_te_irq_handler() works only dsi(DPMS) is on.
So it is enough to enable and disable TE GPIO IRQ in
exynos_dsi_enable(disable)_irq() like DSI IRQ.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>a
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 6fe6486..717c719 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1155,6 +1155,7 @@  static int exynos_dsi_init(struct exynos_dsi *dsi)
 static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi)
 {
 	int ret;
+	int te_gpio_irq;
 
 	dsi->te_gpio = of_get_named_gpio(dsi->panel_node, "te-gpios", 0);
 	if (!gpio_is_valid(dsi->te_gpio)) {
@@ -1169,14 +1170,10 @@  static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi)
 		goto out;
 	}
 
-	/*
-	 * This TE GPIO IRQ should not be set to IRQ_NOAUTOEN, because panel
-	 * calls drm_panel_init() first then calls mipi_dsi_attach() in probe().
-	 * It means that te_gpio is invalid when exynos_dsi_enable_irq() is
-	 * called by drm_panel_init() before panel is attached.
-	 */
-	ret = request_threaded_irq(gpio_to_irq(dsi->te_gpio),
-					exynos_dsi_te_irq_handler, NULL,
+	te_gpio_irq = gpio_to_irq(dsi->te_gpio);
+
+	irq_set_status_flags(te_gpio_irq, IRQ_NOAUTOEN);
+	ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
 					IRQF_TRIGGER_RISING, "TE", dsi);
 	if (ret) {
 		dev_err(dsi->dev, "request interrupt failed with %d\n", ret);