| Message ID | 1416576954-11997-10-git-send-email-gautam.vivek@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Vivek, On Fri, Nov 21, 2014 at 7:05 PM, Vivek Gautam <gautam.vivek@samsung.com> wrote: > BUS1 pinctrl provides gpios for usb and power regulator > available on exynos7-espresso board. So add relevant device > node for pinctrl-bus1. > > Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 26 +++++++++++++++++++++++ > arch/arm64/boot/dts/exynos/exynos7.dtsi | 7 ++++++ > 2 files changed, 33 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi > index 2eef4a2..9648e03 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi > @@ -335,6 +335,32 @@ > }; > }; > > +&pinctrl_bus1 { > + gpf0: gpf0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf4: gpf4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gph1: gph1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + See my comment on patch 01/11, accordingly you can modify this. > &pinctrl_nfc { > gpj0: gpj0 { > gpio-controller; > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index d7a37c3..90048b2 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -26,6 +26,7 @@ > pinctrl5 = &pinctrl_ese; > pinctrl6 = &pinctrl_fsys0; > pinctrl7 = &pinctrl_fsys1; > + pinctrl8 = &pinctrl_bus1; > }; > > cpus { > @@ -242,6 +243,12 @@ > interrupts = <0 383 0>; > }; > > + pinctrl_bus1: pinctrl@14870000 { > + compatible = "samsung,exynos7-pinctrl"; > + reg = <0x14870000 0x1000>; > + interrupts = <0 384 0>; > + }; > + > pinctrl_nfc: pinctrl@14cd0000 { > compatible = "samsung,exynos7-pinctrl"; > reg = <0x14cd0000 0x1000>; > -- > 1.7.10.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index 2eef4a2..9648e03 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -335,6 +335,32 @@ }; }; +&pinctrl_bus1 { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + &pinctrl_nfc { gpj0: gpj0 { gpio-controller; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index d7a37c3..90048b2 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -26,6 +26,7 @@ pinctrl5 = &pinctrl_ese; pinctrl6 = &pinctrl_fsys0; pinctrl7 = &pinctrl_fsys1; + pinctrl8 = &pinctrl_bus1; }; cpus { @@ -242,6 +243,12 @@ interrupts = <0 383 0>; }; + pinctrl_bus1: pinctrl@14870000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14870000 0x1000>; + interrupts = <0 384 0>; + }; + pinctrl_nfc: pinctrl@14cd0000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14cd0000 0x1000>;